Promo: What's next? Taking industry leadership or watching from the sidelines?

What's next? Taking industry leadership or watching from the sidelines?

Take the lead with up to 60% off our instruments

LTE, LTE-Advanced and LTE-Advanced Pro 디지털 표준

LTE, LTE-Advanced and LTE-Advanced Pro 디지털 표준
라이트박스 열기
R&S®LTE, LTE-Advanced and LTE-Advanced Pro 디지털 표준, 스크린샷

주요 사항

  • 3GPP 릴리스 8 ~ 15에 따른 업링크/다운링크 FDD 또는 TDD 신호
  • LTE, NB-IoT, 사이드링크(D2D, C-V2X) 물리적 계층 및 기능
  • 실시간 HARQ 피드백, 타이밍 조정 및 타이밍 어드밴스 
  • 3GPP TS 36.141에 따른 간편 테스트 셋업을 위한 Test Case 위저드
  • 신호 생성 체인의 중간 결과 로깅

LTE, LTE Advanced, LTE Advanced Pro 신호 생성

LTE 소프트웨어 옵션은 R&S®WinIQSIM2TM를 사용하여 기기 또는 데스크톱에서 3GPP 릴리스 8 ~ 15에 따라 표준 호환 FDD 또는 TDD 신호를 생성합니다. 이 옵션은 채널 코딩, 스크램블링을 포함한 LTE 및 NB-IoT의 모든 업링크, 다운링크, 사이드링크 채널 대역폭 및 물리적 채널을 지원합니다. 직관적 GUI, 상황에 맞는 도움말 메뉴, 다운링크 테스트 모델의 사전설정, 업링크 FRC, 구성된 신호의 그래픽 타임플랜이 효율적인 워크플로우를 구현해줍니다. 신호 생성 체인의 중간 결과를 쉽게 로깅하여 디버깅을 간단히 수행할 수 있습니다. 뿐만 아니라 Test Case 위저드를 사용하면 3GPP TS 36.141에 따라 기지국 적합성 테스트를 쉽게 설정할 수 있습니다.

기능 및 장점

전체 물리적 신호 및 채널 지원

LTE, NB-IoT, 사이드링크 물리 계층의 유연한 구성

LTE 옵션은 3GPP 릴리스 8 ~ 15에 따라 물리 계층을 구현합니다. 이 옵션은 모든 다운링크, 업링크, 사이드링크 물리 채널과 지정 채널 대역폭, 1024QAM 등의 변조 체계를 모두 지원하며 채널 코딩, 스크램블링, 데이터 및 제어 정보의 멀티플렉싱과 같은 중요 물리 계층 기능도 지원합니다. 따라서 구성요소, 모듈, 수신기, 기지국 테스트를 위한 표준 적합 신호를 제공할 수 있습니다.

메인 메뉴, 기지국 설정(다운링크).
라이트박스 열기

메인 메뉴, 기지국 설정(다운링크).

MIMO, Carrier Aggregation 및 복수 사용자

최대 8레이어 MIMO 간편 구성 및 최대 5 Carrier Aggregate

LTE 옵션은 3GPP 릴리스 8 ~ 15에 따른 유연한 LTE 안테나 포트 매핑으로 Full MIMO 및 송신 다이버시티 지원을 제공합니다. 업링크 및 교차 캐리어 스케줄링에서 혼합 TDD/FDD CA를 포함한 최대 5개 구성요소 캐리어의 인트라 캐리어 및 인터 캐리어 Aggregation을 구성할 수 있습니다. 현실적 수신기 테스트 시 다운링크에서 최대 4명의 예약 사용자와 업링크에서 최대 8명의 사용자를 구성할 수 있습니다.

업링크 Carrier Aggregation 대화상자
라이트박스 열기

업링크 Carrier Aggregation 대화상자

BS 테스트의 간편 셋업을 위한 Test Case 위저드

Test Case 위저드는 기지국 적합성 및 성능 테스트에 필요한 3GPP TS 36.141에 따른 테스트 신호의 구성을 지원합니다. 여기에서 정의된 Test Case를 기준으로 관련 신호 및 간섭 신호에 대한 사전정의 설정을 선택할 수 있습니다. 또한, 다운링크 테스트 모델과 업링크 고정 레퍼런스 채널에 대한 사전설정 및 사전정의 설정을 사용하여 구성요소 및 기지국 테스트를 위한 테스트 신호를 쉽게 설정할 수 있습니다.

Test Case 위저드 메인 대화상자
라이트박스 열기

Test Case 위저드 메인 대화상자

그래픽 신호 평가

거의 모든 포인트의 그래픽 신호 모니터링 

시간 경과에 따라 구성된 리소스 할당을 표시하는 일반적인 디스플레이 이외에도 다양한 그래픽 디스플레이에서 쉽고 빠른 신호 구성 또는 평가가 가능하여 리소스 할당 충돌을 표시할 수 있습니다. 그래픽 신호 모니터링도 실시간으로 제공됩니다. 전력 스펙트럼, I 및 Q vs. 시간, 벡터 다이어그램, CCDF 등을 표시하도록 구성할 수 있습니다.

구성된 LTE 신호의 전력 스펙트럼.
라이트박스 열기

구성된 LTE 신호의 전력 스펙트럼.

기지국 테스트 전용

실시간 HARQ 피드백 지원

LTE 폐쇄형 루프 BS 테스트 옵션을 사용할 경우 테스트 엔지니어가 동적으로 변동하는 LTE 테스트 신호를 필요에 따라 생성할 수 있습니다. 따라서 LTE 기지국 테스트 사양 3GPP TS 36.141(Chapter 8)에 따라 HARQ 피드백 및 업링크 타이밍 조정 테스트를 수행할 수 있습니다. 시뮬레이션된 UE는 기지국의 HARQ 피드백(ACK/NACK)과 타이밍 조정 명령에 실시간으로 응답할 수 있습니다. 

실시간 HARQ 피드백 대화상자.
라이트박스 열기

실시간 HARQ 피드백 대화상자.

설계 흐름 최적화 지원

설계 검증 및 고급 디버깅을 위한 로그 파일

신호 처리 체인에서 순방향 오류 정정을 포함한 중간 결과를 캡처하기 위한 로깅 포인트가 제공되며, 해당 결과는 비트 스트림 또는 I/Q 샘플 파일에 저장할 수 있습니다. 따라서 설계자가 LTE 물리 계층의 자체 수신기 및 송신기 소프트웨어 구현을 검증하고 고급 디버깅을 수행할 수 있는 정보를 얻을 수 있습니다.

다운링크 로그 파일 생성용 로그 포인트.
라이트박스 열기

다운링크 로그 파일 생성용 로그 포인트.

사용 가능한 모델

R&S®SMW200A
모델
설명
본체

R&S®SMW-K55

주문 번호 1413.4180.02

설명
LTE 릴리스 8
본체

R&S®SMW-K84

주문 번호 1413.5435.02

설명
LTE 릴리스 9
본체

R&S®SMW-K85

주문 번호 1413.5487.02

설명
LTE 릴리스 10
본체

R&S®SMW-K112

주문 번호 1413.8505.02

설명
LTE 릴리스 11
본체

R&S®SMW-K113

주문 번호 1414.1933.02

설명
LTE 릴리스 12
본체

R&S®SMW-K119

주문 번호 1414.3542.02

설명
LTE 릴리스 13/14/15
본체

R&S®SMW-K115

주문 번호 1414.2723.02

설명
셀룰러 IoT 릴리스 13
본체

R&S®SMW-K143

주문 번호 1414.6064.02

설명
셀룰러 IoT 릴리스 14
본체

R&S®SMW-K146

주문 번호 1414.6564.02

설명
셀룰러 IoT 릴리스 15
본체

R&S®SMW-K69

주문 번호 1413.4480.02

설명
LTE Closed-Loop BS 테스트
본체

R&S®SMW-K255

주문 번호 1413.5235.02

설명
LTE 릴리스 8(WinIQSIM2™)
본체

R&S®SMW-K284

주문 번호 1413.5535.02

설명
LTE 릴리스 9(WinIQSIM2™)
본체

R&S®SMW-K285

주문 번호 1413.5587.02

설명
LTE 릴리스 10(WinIQSIM2™)
본체

R&S®SMW-K412

주문 번호 1413.8557.02

설명
LTE 릴리스 11(WinIQSIM2™)
본체

R&S®SMW-K413

주문 번호 1414.2030.02

설명
LTE 릴리스 12(WinIQSIM2™)
본체

R&S®SMW-K419

주문 번호 1414.3588.02

설명
LTE 릴리스 13/14/15(WinIQSIM2™)
본체

R&S®SMW-K415

주문 번호 1414.2769.02

설명
셀룰러 IoT 릴리스 13(WinIQSIM2™)
본체

R&S®SMW-K443

주문 번호 1414.6093.02

설명
셀룰러 IoT 릴리스 14(WinIQSIM2™)
본체

R&S®SMW-K446

주문 번호 1414.6587.02

설명
셀룰러 IoT 릴리스 15(WinIQSIM2™)
본체
R&S®SMM100A
모델
설명
본체

R&S®SMM-K84

주문 번호 1441.1882.02

설명
LTE 릴리스 9
본체

R&S®SMM-K85

주문 번호 1441.1876.02

설명
LTE 릴리스 10
본체

R&S®SMM-K112

주문 번호 1441.1847.02

설명
LTE 릴리스 11
본체

R&S®SMM-K113

주문 번호 1441.1830.02

설명
LTE 릴리스 12
본체

R&S®SMM-K119

주문 번호 1441.1776.02

설명
LTE 릴리스 13/14/15
본체

R&S®SMM-K115

주문 번호 1441.1818.02

설명
셀룰러 IoT 릴리스 13
본체

R&S®SMM-K143

주문 번호 1441.1747.02

설명
셀룰러 IoT 릴리스 14
본체

R&S®SMM-K146

주문 번호 1441.1247.02

설명
셀룰러 IoT 릴리스 15
본체

R&S®SMM-K255

주문 번호 1441.1601.02

설명
LTE 릴리스 8(WinIQSIM2™)
본체

R&S®SMM-K284

주문 번호 1441.1530.02

설명
LTE 릴리스 9(WinIQSIM2™)
본체

R&S®SMM-K285

주문 번호 1441.1524.02

설명
LTE 릴리스 10(WinIQSIM2™)
본체

R&S®SMM-K412

주문 번호 1441.1453.02

설명
LTE 릴리스 11(WinIQSIM2™)
본체

R&S®SMM-K413

주문 번호 1441.1447.02

설명
LTE 릴리스 12(WinIQSIM2™)
본체

R&S®SMM-K419

주문 번호 1441.1382.02

설명
LTE 릴리스 13/14/15(WinIQSIM2™)
본체

R&S®SMM-K415

주문 번호 1441.1424.02

설명
셀룰러 IoT 릴리스 13(WinIQSIM2™)
본체

R&S®SMM-K443

주문 번호 1441.1253.02

설명
셀룰러 IoT 릴리스 14(WinIQSIM2™)
본체

R&S®SMM-K446

주문 번호 1441.1230.02

설명
셀룰러 IoT 릴리스 15(WinIQSIM2™)
본체

R&S®SMM-K55

주문 번호 1441.1924.02

설명
LTE 릴리스 8
본체
R&S®SMBV100B
모델
설명
본체

R&S®SMBVB-K55

주문 번호 1423.7830.02

R&S®SMBVB-K84

주문 번호 1423.7901.02

설명
LTE 릴리스 9 및 개선 기능
본체

R&S®SMBVB-K85

주문 번호 1423.7918.02

설명
LTE 릴리스 10(LTE-Advanced)
본체

R&S®SMBVB-K112

주문 번호 1423.8037.02

설명
LTE 릴리스 11 및 개선 기능
본체

R&S®SMBVB-K113

주문 번호 1423.8043.02

설명
LTE 릴리스 12
본체

R&S®SMBVB-K119

주문 번호 1423.8108.02

설명
LTE 릴리스 13/14/15
본체

R&S®SMBVB-K115

주문 번호 1423.8066.02

설명
셀룰러 IoT
본체

R&S®SMBVB-K143

주문 번호 1423.8637.02

설명
셀룰러 IoT 릴리스 14
본체

R&S®SMBVB-K146

주문 번호 1423.8808.02

설명
셀룰러 IoT 릴리스 15
본체

R&S®SMBVB-K255

주문 번호 1423.8272.02

설명
LTE(WinIQSIM2™)
본체

R&S®SMBVB-K284

주문 번호 1423.8343.02

설명
LTE 릴리스 9 및 개선 기능(WinIQSIM2™)
본체

R&S®SMBVB-K285

주문 번호 1423.8350.02

설명
LTE 릴리스 10(LTE-Advanced)(WinIQSIM2™)
본체

R&S®SMBVB-K412

주문 번호 1423.8495.02

설명
LTE 릴리스 11 및 개선 기능(WinIQSIM2™)
본체

R&S®SMBVB-K413

주문 번호 1423.8508.02

설명
LTE 릴리스 12(WinIQSIM2™)
본체

R&S®SMBVB-K419

주문 번호 1423.8550.02

설명
LTE 릴리스 13/14/15(WinIQSIM2™)
본체

R&S®SMBVB-K415

주문 번호 1423.8514.02

설명
셀룰러 IoT(WinIQSIM2™)
본체

R&S®SMBVB-K443

주문 번호 1423.8643.02

설명
셀룰러 IoT 릴리스 14(WinIQSIM2™)
본체

R&S®SMBVB-K446

주문 번호 1423.8814.02

설명
셀룰러 IoT 릴리스 15(WinIQSIM2™)
본체
R&S®SMCV100B
모델
설명
본체

R&S®SMCVB-K255

주문 번호 1434.4373.02

설명
LTE 릴리스 8
본체

R&S®SMCVB-K284

주문 번호 1434.4496.02

설명
LTE 릴리스 9
본체

R&S®SMCVB-K285

주문 번호 1434.4515.02

설명
LTE 릴리스 10
본체

R&S®SMCVB-K412

주문 번호 1434.4650.02

설명
LTE 릴리스 11
본체

R&S®SMCVB-K413

주문 번호 1434.4673.02

설명
LTE 릴리스 12
본체

R&S®SMCVB-K419

주문 번호 1434.4796.02

설명
LTE 릴리스 13/14/15
본체

R&S®SMCVB-K415

주문 번호 1434.4738.02

설명
셀룰러 IoT 릴리스 13
본체

R&S®SMCVB-K443

주문 번호 1434.4850.02

설명
셀룰러 IoT 릴리스 14
본체

R&S®SMCVB-K446

주문 번호 1434.5705.02

설명
셀룰러 IoT 릴리스 15
본체
R&S®SGT100A
모델
설명
본체

R&S®SGT-K255

주문 번호 1419.6804.02

설명
LTE 릴리스 8(WinIQSIM2™)
본체

R&S®SGT-K284

주문 번호 1419.7152.02

설명
LTE 릴리스 9(WinIQSIM2™)
본체

R&S®SGT-K285

주문 번호 1419.7200.02

설명
LTE 릴리스 10(WinIQSIM2™)
본체

R&S®SGT-K412

주문 번호 1419.7600.02

설명
LTE 릴리스 11(WinIQSIM2™)
본체

R&S®SGT-K413

주문 번호 1419.8159.02

설명
LTE 릴리스 12(WinIQSIM2™)
본체

R&S®SGT-K415

주문 번호 1426.3607.02

설명
셀룰러 IoT 릴리스 13(WinIQSIM2™)
본체

R&S®SGT-K419

주문 번호 1426.3859.02

설명
LTE 릴리스 13/14/15(WinIQSIM2™)
본체

R&S®SGT-K443

주문 번호 1419.7752.02

설명
셀룰러 IoT 릴리스 14(WinIQSIM2™)
본체

R&S®SGT-K446

주문 번호 1419.8171.02

설명
셀룰러 IoT 릴리스 15(WinIQSIM2™)
본체

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.