문서 및 기사 검색

The user manuals describe the digital standards supported by the signal generators R&S®SMU200A, R&S®SMATE200A, R&S®SMJ100A and R&S®AMU200A.

English - 2016. 1. 28.

This application note shows how to perform LTE terminal block error rate (BLER) and throughput tests under fading conditions with the R&S®CMW500 Protocol Tester and the R&S®AMU200A Fading Simulator.

English - 2012. 3. 27.

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 2017. 12. 24.

Provides information on security issues when working with R&S®AMU200A in secure areas.

English - 2010. 9. 23.

Most of the tests specified in standard TS 34.121 [1] for 3GPP Rel-5 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-5 measurements on transmitter characteristics, receiver characteristics and performance tests according to TS 34.121 V8.7.0 clauses 5, 6 and 9 with standalone R&S®CMU200. Test cases that require additional instruments, e.g. fading generator (R&S®SMU200A or R&S®AMU200A) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&S®CMU200 firmware V5.03 for UE supporting operating band I with power class 3 in RMC 12.2 kbps + HSDPA is attached to this application note.

English - 2009. 10. 13.

Most of the tests specified in standard TS 34.121 for 3GPP Rel-99 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-99 measurements on transmitter/receiver characteristics, and performance tests according to TS 34.121 V8.4.0 clauses 5, 6 and 7 with standalone R&S®CMU200. Test cases that require additional instuments e.g. fading simulator (R&S®SMU200A or R&S®AMU200A) or spectrum analyzer (R&S®FSQ) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&SCMU200 firmware V5.02 for UE supporting band I with power class 3 in RMC 12.2 kbps downlink/uplink is attached to this application note.

English - 2009. 4. 15.

During wireless transmission over the air a signal is subject to fading. Since fading can strongly influence the communication, devices such as mobile phones must be tested under real-world conditions to verify their performance. The Rohde & Schwarz vector signal generators R&S®SMW200A, R&S®SMU200A and R&S®AMU200A make it possible to perform such tests. Their integrated real-time fading simulators reproduce well-defined and repeatable real-world test scenarios to bring reality into your laboratory. A multitude of standard-compliant, preconfigured fading scenarios make the configuration as easy as possible.This application note gives a brief introduction to fading and explains how to use the fading simulators in custom applications.

English - 2013. 4. 25.

Korean - 2015. 9. 4.

Korean - 2019. 8. 20.

Most of the tests specified in standard TS 34.121 [1] for 3GPP Rel-6 can be performed with R&S®CMU200. This document provides a step by step guide on how to perform Rel-6 measurements on transmitter characteristics and performance tests according to TS 34.121 V8.7.0 clauses 5 and 10 with stand-alone R&S®CMU200. Test cases that require additional instruments, e.g. fading generator (R&S®SMU200A or R&S®AMU200A) will be discussed in brief in this application note with recommended reference. A set of *.sav files based on R&S®CMU200 firmware V5.03 for UE supporting operating band I and power class 3 in RMC 12.2 kbps + HSPA is attached to this application note.

English - 2009. 10. 7.

As well as static tests, modern mobile communication standards also stipulate measurements under fading conditions, sometimes with additional white gaussian noise AWGN. Rohde & Schwarz supports these tests with the combination of the R&S®CMU200 Radio Communication Tester and the R&S®SMU200A or R&S®AMU200A Vector / Baseband Signal Generator and Fading Simulator. Applying fading and noise always raises the crest factor of a signal considerably. Thus, automatic path attenuation inside the Rohde & Schwarz baseband fader prevents the new signal peaks from being clipped at I/Q full scale. Any additional attenuation in the baseband, however, makes the RF output fall below its intended level. This application note shows how to achieve an accurate RF output level by compensating for the I/Q attenuation - without modifying the test setup or using additional instruments.

English - 2009. 1. 9.

English - 2015. 9. 4.

Describes all instrument functions and remote control commands of the base unit, including measurement and programming examples.

English - 2016. 1. 28.

English - 2019. 8. 20.

This Application Note describes signal generation with carrier aggregation for 802.16m based on 802.16e signals in practical important configurations using one or more Vector Signal Generators R&S SMU200A or R&S SMBV100A. Various examples illustrate how to analyze these signals using the Vector Signal Analyzer R&S FSQ, R&S FSG or R&S FSV.

English - 2010. 3. 22.

Recent mobile test methods could not evaluate the quality of data reduced speech signals with different coded and decoded signals. The Perceptual Evaluation of Speech Quality (PESQ) provides the solution for this measuring problem. WCDMA PESQ is an add-on tool for CMUgo for automatic measurement of the PESQ for WCDMA mobile phones according to recommendation ITU-T P.862.1 featuring selectable fading profiles and variable Additional White Gaussian Noise (AWGN).

English - 2012. 1. 5.

Rohde & Schwarz offers a complete test solution for WiMAX applications by combining its Signal Generator R&S SMU200A and Signal Analyzer R&S FSQ plus the appropriate options. This application note provides an overview of the differences between OFDM and OFDMA and demonstrates, how convenient it is to generate and analyze WiMAX OFDMA signals according to standard IEEE 802.16e-2005.

English - 2007. 5. 23.

Existing GSM mobile communication systems have the potential to double voice capacity by adding the “Voice services over Adaptive Multi-user channels on One Slot” (VAMOS) feature as specified in the 3rd Generation Partnership Project (3GPP) GSM/EDGE Radio Access Network (GERAN) Release 9 specifications. This application note describes the VAMOS feature from an air interface perspective in detail and specifically illustrates the VAMOS testing solution offered by Rohde & Schwarz test equipment.

English - 2011. 8. 16.

Describes the specific functions of the application.

English - 2016. 2. 4.

This application note is a programming guide. It briefly summarizes basic tips and information about SCPI programming for remote-controlling Rohde & Schwarz signal generators.

English - 2013. 4. 26.

Fading in the baseband of the R&S®SMW200A signal generator is well proven and widely accepted for testing any mobile radio standard. However, there are applications where an RF signal must be faded.A versatile RF Fading Simulator can easily be built using an R&S®FSW, R&S®FSQ, R&S®FSG, R&S®FSV signal analyzer with Digital Base Band Interface or with the instrument combination R&S®TSMW / R&S®IQR and an R&S®SMU signal generator with digital baseband inputs and fading simulator option. Note describes how.

English - 2015. 2. 27.

This Application Note describes measurements on RFID readers and chipcards according to ISO/IEC 14443 and similar standards, using a signal generator and a spectrum analyzer. Using a modern spectrum analyzer like the R&S®FSL not only increases accuracy and measurement speed, but also simplifies operation. Interoperability tests, in particular, are simplified by generating reader test signals with a signal generator. With software option R&S®SMx/AMU/AFQ-K6 chipcards can be tested without a reader

English - 2010. 1. 25.

This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA, GSM (GRPS and EGPRS(2)), CDMA2000 and 1xEV-DO.

English - 2015. 11. 3.

This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Android™ tablet as if working on it locally. Step-by-step procedures are provided for setting up and configuring the T&M instrument and the tablet. On the tablet, a special App implements the Windows® 'Remote Desktop' functionality. T&M instrument and tablet are connected via WLAN (also called Wi-Fi network).

English - 2013. 8. 22.

Provides the information required to prepare the instrument for use and start working.

English - 2009. 10. 22.

Multiple Input Multiple Output (MIMO) is an integral part of LTE. Vector signal generators and signal & spectrum analyzers from Rohde & Schwarz support LTE measurements with up to 4 antennas. This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.

English - 2014. 10. 9.

Software tools allow to make the control of T&M instruments more convenient. The adoption of the following tools for Windows®-based T&M instruments is described: ● Synergy:One mouse and one keyboard control a group of T&M instruments ● CamStudio:Video clips of the display of a T&M instrumentare recorded during operation

English - 2013. 6. 13.