R&S®ESL EMI test receiver

Compact, cost-effective measuring receiver

R&S®ESL EMI test receiver
Open Lightbox
R&S®ESL EMI test receiver
Open Lightbox
R&S®ESL EMI test receiver
Open Lightbox
R&S®ESL EMI test receiver
Open Lightbox
R&S®ESL EMI test receiver
Open Lightbox
R&S®ESL EMI test receiver, Front view R&S®ESL EMI test receiver, Front High R&S®ESL EMI test receiver, Side view R&S®ESL EMI test receiver, Back view R&S®ESL EMI test receiver, Front Low

Key facts

  • Frequency range from 9 kHz to 3 GHz or 6 GHz
  • All major functions of an advanced EMI test receiver
  • Weighting detectors: peak, RMS, quasi-peak, average and RMS-average
  • Compact, lightweight instrument, battery powered for mobile use
  • 3 year warranty extension

Compact, cost-effective measuring receiver

The R&S®ESL EMI test receiver combines two instruments in one, measuring EMC disturbances in accordance with the relevant standards and also serving as a full-featured spectrum analyzer for diverse lab applications. The combination of very good RF characteristics and all of the important functions needed for fast, precise measurement and evaluation of the EMC of a device under test in accordance with commercial standards is unmatched in this instrument class. The diverse analysis capabilities, high measurement speed and time-saving automated test routines make the R&S®ESL the obvious choice for any development lab with small budget that needs to prepare for EMC certification tests.

Features & benefits

Very good RF characteristics

Precise, reproducible measurements thanks to very good RF characteristics

  • 0.5 dB amplitude accuracy
  • 1 dB compression +5 dBm
  • RF input pulse-resistant up to 10 mWs
  • Displayed average noise level with preamplifier <–152 dBm (1 Hz)
  • Resolution bandwidths 10 Hz to 10 MHz (–3 dB), 200 Hz, 9 kHz, 120 kHz (–6 dB), 1 MHz (impulse)

Detailed level analysis
Open Lightbox

Detailed level analysis

Top: continuously updated level values for up to four selected detectors bottom: spectrum measurement with up to six traces (based on scan table settings)

Unrivaled price/performance ratio

Unrivaled price/performance ratio in its class

  • Two test instruments in one: EMI test receiver and spectrum analyzer
  • Low investment costs
  • Best RF characteristics available in this instrument class
  • Extensive measurement functions and evaluation features
  • Cost-saving plug & play options

Circuit board analysis
Open Lightbox

Circuit board analysis

Analysis of radiated emissions using a near field probe (R&S®HZ-14)

Intuitive operation

Intuitive operation – as with all  EMI test receivers from Rohde & Schwarz

  • Clear scan settings in table format
  • Able to perform simultaneous measurements with multiple detectors
  • Predefined antenna factors and limit lines in accordance with commercial standards
  • Selective monitoring of critical disturbances using tune to marker and marker track functions
  • Simultaneous measurements with up to four detectors
  • Large bargraph display with max. hold function for clear presentation of measured values

Scan table configuration
Open Lightbox

Scan table configuration

Defined parameters for various frequency ranges are used automatically to ensure reproducible, standard-compliant measurements.

Available models

Available models
Models
Frequency range
Tracking generator

R&S®ESL3

Order number 1300.5001.03

Frequency range
 9 kHz to 3 GHz
Tracking generator
Not available

R&S®ESL3

Order number 1300.5001.13

Frequency range
 9 kHz to 3 GHz
Tracking generator
Integrated

R&S®ESL6

Order number 1300.5001.06

Frequency range
 9 kHz to 6 GHz
Tracking generator
Not available

R&S®ESL6

Order number 1300.5001.16

Frequency range
 9 kHz to 6 GHz
Tracking generator
Integrated

Available options

General
Product
Description
R&S®FSL-B4

Order number 1300.6008.02

Description

OCXO reference frequency

High precision frequency reference

R&S®FSL-B5

Order number 1300.6108.02

Description

Additional interfaces

video out, IF out, noise source control, AUX port, connector for the R&S®NRP power sensors

R&S®FSL-B8

Order number 1300.5701.02

Description

Gated sweep function

Displays the modulation spectra of GSM or WLAN signals. Requires R&S®ZVL-K1

R&S®FSL-B10

Order number 1300.6208.02

Description

GPIB interface

R&S®FSL-B22

Order number 1300.5953.02

Description

RF preamplifier

3 GHz/6 GHz

R&S®FSL-B30

Order number 1300.6308.02

Description

DC power supply

DC power supply socket. 12V to 28V

R&S®FSL-B31

Order number 1300.6408.02

Description

NiMH battery pack

(requires R&S®FSL-B30)

General analysis
Product
Description
R&S®FSL-K7

Order number 1301.9246.02

Description

AM/FM/φM measurement demodulator

Turns the R&S®ZVL into an analog modulation analyzer for amplitude, frequency, or phase modulated signals. Requires R&S®ZVL-K1

R&S®FSL-K9

Order number 1301.9530.02

Description

Power sensor support

(requires R&S®FSL-B5 or R&S®NRP-Z4 and R&S®NRP power sensors)

Order number 1301.9817.02

Description

Noise figure and gain measurements

(requires R&S®FSL-B5, and a preamplifier)

General accessories
Product
Description
R&S®ZZA-S334

Order number 1109.4487.00

Description

19" rackmount adapter

For mounting a 3/4 19" housing 3 RU high in a standard 19" rack

R&S®FSL-Z3

Order number 1300.5401.00

Description

Soft carrying bag

R&S®EVS-Z6

Order number 5201.7760.00

Description

Protective hard cover

R&S®FSL-Z4

Order number 1300.5430.02

Description

Additional charger unit

R&S®RAM

Order number 0358.5414.02

Description

Matching pad, 75 Ω, L section

bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section

R&S®RAZ

Order number 0358.5714.02

Description

Matching pad, 75 Ω, series resistor 25 Ω

0 Hz to 2.7 GHz

R&S®FSH-Z38

Order number 1300.7740.02

Description

Matching pad 50/75 Ω, L section, N to BNC

bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W

R&S®NRP-Z11

Order number 1138.3004.02

Description

Average Power Sensor

10 MHz to 8 GHz, 200 mW

R&S®NRP-Z21

Order number 1137.6000.02

Description

Average Power Sensor

10 MHz to 18 GHz, 200 mW

R&S®NRP-Z22

Order number 1137.7506.02

Description

Average Power Sensor

10 MHz to 18 GHz, 2 W

R&S®NRP-Z23

Order number 1137.8002.02

Description

Average Power Sensor

10 MHz to 18 GHz, 15 W

R&S®NRP-Z24

Order number 1137.8502.02

Description

Average Power Sensor

10 MHz to 18 GHz, 30 W

R&S®NRP-Z27

Order number 1169.4102.02

Description

Power Sensor Module with Power Splitter

DC to 18 GHz, 500 mW

R&S®NRP-Z37

Order number 1169.3206.02

Description

Power Sensor Module with Power Splitter

DC to 26.5 GHz, 500 mW

R&S®NRP-Z91

Order number 1168.8004.02

Description

Average Power Sensor

9 kHz to 6 GHz, 200 mW

R&S®NRP-Z51

Order number 1138.0005.02

Description

Thermal Power Sensor

0 Hz to 18 GHz, 100 mW

R&S®NRP-Z55

Order number 1138.2008.02

Description

Thermal Power Sensor
 

0 Hz to 40 GHz, 100 mW

Order number 1137.9009.02

Description

Wideband Power Sensor

50 MHz to 18 GHz, 100 mW

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

I want to receive information from Rohde & Schwarz via

Marketing permission

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.