R&S®NRP-Z2x1 two-path diode power sensors

R&S®NRP-Z2x1 two-path diode power sensors
Open Lightbox
R&S®NRP-Z2x1 two-path diode power sensors
Open Lightbox
R&S®NRP-Z2x1 two-path diode power sensors
Open Lightbox
R&S®NRP-Z2x1 two-path diode power sensors
Open Lightbox
R&S®NRP-Z2x1 two-path diode power sensors
Open Lightbox
R&S®NRP-Z2x1 two-path diode power sensors, Side view R&S®NRP-Z2x1 two-path diode power sensors, Side view R&S®NRP-Z2x1 two-path diode power sensors, Side view R&S®NRP-Z2x1 two-path diode power sensors, Side view R&S®NRP-Z2x1 two-path diode power sensors, Side view

Key facts

  • Measurement range: -60 dBm to +20 dBm (1 nW to 100 mW)
  • Frequency range: 10 MHz to 18 GHz
  • Best price/performance ratio in its class
  • 80 dB dynamic range for CW and modulated signals
  • Two-path diode power sensor with enhanced inter-range performance

Cost-effective power measurement solution for production

The R&S®NRP-Z211 two-path diode power sensors combine all key characteristics relevant for their use in production: They are cost-effective, fast, precise and USB-capable. The sensors support the same measurement functions as the R&S®NRPxx‑Z11/R&S®NRP‑Z2x/R&S®NRP‑Z31 three-path diode power sensors and offer the best price/performance ratio in their class.
The two-path diode power sensors use the tried-and-tested technology of the three-path diode power sensors. With two overlapping diode paths measured in parallel and a wide dynamic range of 80 dB, the power sensors feature high measurement accuracy and speed.

Features & benefits

Cost-effective solution

Ideal for production applications

The R&S®NRP-Z211/-Z221 two-path diode power sensors combine all key characteristics relevant for their use in production. These USB sensors are cost-effective, fast and
precise. The sensors support the same measurement functions as the R&S®NRPxxS three-path diode power sensors and offer the best price/performance ratio in their class.

NRP-Zxx sensors in an R&S factory site
Open Lightbox

NRP-Zxx sensors in an R&S factory site

Tried-and-tested technology 

Overlapping diode paths measured in parallel

The two-path diode power sensors use the tried-and-tested Rohde & Schwarz multipath technology. With two overlapping diode paths measured in parallel and a wide dynamic range of 80 dB, the power sensors feature high measurement accuracy and speed.

NRP-Zxx sensors in operation with NPR-Z5
Open Lightbox

NRP-Zxx sensors in operation with NPR-Z5

Available models

Available models
Models
Frequency range
Level range
Connector type
Cable length

R&S®NRP-Z211

Order number 1417.0409.02

Frequency range
10 MHz - 8 GHz
Level range
-60 dBm - +20 dBm
Connector type
N (m)
Cable length
1.6 m

R&S®NRP-Z211

Order number 1417.0409.04

Frequency range
10 MHz - 8 GHz
Level range
-60 dBm - +20 dBm
Connector type
N (m)
Cable length
0.4 m

R&S®NRP-Z221

Order number 1417.0309.02

Frequency range
10 MHz - 18 GHz
Level range
-60 dBm - +20 dBm
Connector type
N (m)
Cable length
1.6 m

Available options

Cables and adapters
Product
Description
R&S®NRP-Z2

Order number 1146.6750.03

Description

Sensor extension cable

Sensor extension cable to 3 meters.

R&S®NRP-Z2

Order number 1146.6750.05

Description

Sensor extension cable

Sensor extension cable to 5 meters.

R&S®NRP-Z2

Order number 1146.6750.10

Description

Sensor extension cable

Sensor extension cable to 10 meters.

R&S®NRP-Z2

Order number 1146.6750.15

Description

Sensor extension cable

Sensor extension cable to 5m, with bulkhead jack.

R&S®NRP-Z4

Order number 1146.8001.02

Description

USB adapter cable (passive), length: 2 m

R&S®NRP-Z4

Order number 1146.8001.04

Description

USB adapter cable (passive), length: 0.5 m

R&S®NRP-Z4

Order number 1146.8001.06

Description

USB adapter cable (passive), length: 0.15 m

R&S®NRP-Z4

Order number 1146.8001.11

Description

USB adapter cable (passive), length: 1 m, for panel mounting

Interface accessories
Product
Description
R&S®NRP-Z5

Order number 1146.7740.02

Description

USB sensor hub

R&S®NRP-Z5 can host up to 4 R&S®NRPxxS(N), R&S®NRPxxT(N), R&S®NRPxxA(N) or R&S®NRP-Z sensors. A professional trigger solution allows simultaneous internal and external triggering of all connected sensors.

Documentation
Product
Description
R&S®DCV-1

Order number 0240.2187.06

Description

Documentation of calibration values

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.