R&S®RTO2000 - FAQ

Results 28
  • RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands

    RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands RTE, RTO, RTP, measurement, designated frequency, FFT, remote commands RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands. RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands RTE, RTO, RTP, measurement, designated frequency, FFT

  • Volume Adjustment of the "BEEP"

    Volume Adjustment of the "BEEP" FAQ, RTO, RTE, RTP Volume Adjustment of the "BEEP" Volume Adjustment of the "BEEP" FAQ, RTO, RTE, RTP Volume Adjustment of the "BEEP" Related Products

  • RT-ZSxx – more noise with active probes?

    RT-ZSxx – more noise with active probes? Probes, reduce noise, RTM, RTA, RTE, RTO, RTP, RT-ZSxx I have compared passive and active probes. It seems that the noise with active probes is higher. What is the reason and what can I do to reduce the noise? RT-ZSxx – more noise with active probes? Probes, reduce noise, RTM, RTA, RTE, RTO, RTP, RT-ZSxx I have compared passive and active probes. It seems that

  • RTO/RTP-K11 I/Q software interface - sample script for configuration and data query

    RTO/RTP-K11 I/Q software interface - sample script for configuration and data query RTO, RTP-K11, I/Q software interface, sample script, configuration, data query The SCPI sequence for configuration and data query for the I/Q software interface option K11. RTO/RTP-K11 I/Q software interface - sample script for configuration and data query RTO, RTP-K11, I/Q software interface, sample script, configuration

  • Programming examples for oscilloscopes

    Programming examples for oscilloscopes Programming examples, oscilloscopes, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO, RTO1000, RTO2000, RTO6, RTP Programming examples for oscilloscopes. Programming examples for oscilloscopes Programming examples, oscilloscopes, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO, RTO1000, RTO2000, RTO6

  • Connection of DUT and Link partner with test fixture RT-ZF2

    Connection of DUT and Link partner with test fixture RT-ZF2 RTO, RTP, RT-ZF2 Connection of DUT and Link partner with test fixture RT-ZF2 Connection of DUT and Link partner with test fixture RT-ZF2 RTO, RTP, RT-ZF2 Connection of DUT and Link partner with test fixture RT-ZF2 Related Products

  • RTE/RTO/RTP Autologon recovery

    RTE/RTO/RTP Autologon recovery RTE, RTO, RTP, Autologon At startup of RTE/RTO/RTP Windows asks for user and password. How can I get back the autologon function? RTE/RTO/RTP Autologon recovery RTE, RTO, RTP, Autologon At startup of RTE/RTO/RTP Windows asks for user and password. How can I get back the autologon function? Related Products

  • Number of harmonics in RTE/RTO Power option

    Number of harmonics in RTE/RTO Power option Number of harmonics in RTE/RTO Power option Number of harmonics, RTE, RTO, Power option, FAQ Number of harmonics in RTE/RTO Power option Number of harmonics in RTE/RTO Power option Number of harmonics, RTE, RTO, Power option, FAQ Related Products

  • Change the input impedance with SCPI commands

    Change the input impedance with SCPI commands Input impedance, 50 Ohm, 1 MOhm, SCPI command How can I switch between the input impedance of 50 Ohm and 1 MOhm by using SCPI command. Change the input impedance with SCPI commands Input impedance, 50 Ohm, 1 MOhm, SCPI command How can I switch between the input impedance of 50 Ohm and 1 MOhm by using SCPI command. Related Products

  • R&S Scope Suite - eMMC compliance test fails

    R&S Scope Suite - eMMC compliance test fails Scope Suite, eMMC compliance test fails, RTO, RTP R&S Scope Suite - eMMC compliance test fails R&S Scope Suite - eMMC compliance test fails Scope Suite, eMMC compliance test fails, RTO, RTP R&S Scope Suite - eMMC compliance test fails Related Products

  • RTO / RTP Firmware Update from an older Version

    RTO / RTP Firmware Update from an older Version RTO, RTP, Firmware update RTO / RTP Firmware Update from an older Version RTO / RTP Firmware Update from an older Version RTO, RTP, Firmware update RTO / RTP Firmware Update from an older Version Related Products

  • RTE/RTO/RTP - Zoom shows ringing effects

    RTE/RTO/RTP - Zoom shows ringing effects RTE, RTO, RTP, Zoom When I use the zoom function to look at the rising edge of a rectangle signal, I see ringing which is not real, see screenshot. What is the reason? RTE/RTO/RTP - Zoom shows ringing effects RTE, RTO, RTP, Zoom When I use the zoom function to look at the rising edge of a rectangle signal, I see ringing which is not real, see screenshot. What

  • RTE/RTO/RTP - export of the history into one file with remote commands

    RTE/RTO/RTP - export of the history into one file with remote commands RTE, RTO, RTP, history, export into one file RTE/RTO/RTP - export of the history into one file with remote commands RTE/RTO/RTP - export of the history into one file with remote commands RTE, RTO, RTP, history, export into one file RTE/RTO/RTP - export of the history into one file with remote commands Related Products

  • RTO-K11 IQ Software Interface shows "CF+BW/2 > DevBW"

    RTO-K11 IQ Software Interface shows "CF+BW/2 > DevBW" RTO-K11, IQ Software Interface, CF+BW/2, DevBW When yout set the carrier frequency and the filter bandwidth, you get the warning "CF + BW/2 > DevBW". RTO-K11 IQ Software Interface shows "CF+BW/2 > DevBW" RTO-K11, IQ Software Interface, CF+BW/2, DevBW When yout set the carrier frequency and the filter bandwidth, you get the warning "CF + BW/2 > DevBW

  • Accuracy of RMS Measurements

    Accuracy of RMS Measurements FAQ, RTO, RTE, Accuracy of RMS Measurements Accuracy of RMS Measurements Accuracy of RMS Measurements FAQ, RTO, RTE, Accuracy of RMS Measurements Accuracy of RMS Measurements Related Products

  • Scaling of frequency measurements RTE, RTO, RTP in cycles/min

    Scaling of frequency measurements RTE, RTO, RTP in cycles/min FAQ, RTO, RTE, RTP, Scaling of frequency measurements Scaling of frequency measurements RTE, RTO, RTP in cycles/min Scaling of frequency measurements RTE, RTO, RTP in cycles/min FAQ, RTO, RTE, RTP, Scaling of frequency measurements Scaling of frequency measurements RTE, RTO, RTP in cycles/min Related Products

  • Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test?

    Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite

  • Decoding of SENT protocoll shows CRC errors

    Decoding of SENT protocoll shows CRC errors Decoding, SENT protocoll, CRC errors, RTO, RTE, RTP FAQ - Decoding of SENT protocoll shows CRC errors Decoding of SENT protocoll shows CRC errors Decoding, SENT protocoll, CRC errors, RTO, RTE, RTP FAQ - Decoding of SENT protocoll shows CRC errors Related Products

  • Waveform export to csv files shows wrong values in Excel

    Waveform export to csv files shows wrong values in Excel RTO, RTE, RTP, RTM, RTB, RTC, RTA I have exported the waveform into a csv file. When I open the file in Excel, the values are completely wrong. How can I get correct values? Waveform export to csv files shows wrong values in Excel RTO, RTE, RTP, RTM, RTB, RTC, RTA I have exported the waveform into a csv file. When I open the file in Excel, the

  • WEB control is not working with the RTO

    WEB control is not working with the RTO RTO, WEB control, network WEB control is not working with the RTO. WEB control is not working with the RTO RTO, WEB control, network WEB control is not working with the RTO. Related Products

  • Connection of R&S ScopeSuite to RTO/RTP fails

    Connection of R&S ScopeSuite to RTO/RTP fails FAQ, RTO, RTE, Scope suite Connection of R&S ScopeSuite to RTO/RTP fails Connection of R&S ScopeSuite to RTO/RTP fails FAQ, RTO, RTE, Scope suite Connection of R&S ScopeSuite to RTO/RTP fails Related Products

  • RTO - Export of waveform data into MATLAB

    RTO - Export of waveform data into MATLAB RTO1000, RTO1002, RTO1004, RTO1012, RTO1014, RTO1022, RTO1024, RTO1044, RTO2000, RTO2002, RTO2012, RTO2022, RTO2032, RTO2004, RTO2014, RTO2024, RTO2034, RTO2044, RTO2064 I want to export the waveform data of my RTO scope into MATLAB, but the only way I found so far is the screenshot option. Is there another way to use the trace data in my script? RTO - Export

  • Export of analog and digital channels of the same acquistion

    Export of analog and digital channels of the same acquistion FAQ, RTE, RTO Export of analog and digital channels of the same acquistion Export of analog and digital channels of the same acquistion FAQ, RTE, RTO Export of analog and digital channels of the same acquistion Related Products

  • Offset changes RMS measurement

    Offset changes RMS measurement Offset, changes RMS, measurement, RTE, RTO, RTP When I do RMS measurements and an offset is applied, the result changes. I could not see that effect on other scopes. What is wrong here? Offset changes RMS measurement Offset, changes RMS, measurement, RTE, RTO, RTP When I do RMS measurements and an offset is applied, the result changes. I could not see that effect on other

  • R&S Scope Suite - Error communicating with oscilloscope

    R&S Scope Suite - Error communicating with oscilloscope Scope Suite, RTO2000, Error, communicating with oscilloscope R&S Scope Suite - Error communicating with oscilloscope R&S Scope Suite - Error communicating with oscilloscope Scope Suite, RTO2000, Error, communicating with oscilloscope R&S Scope Suite - Error communicating with oscilloscope Related Products

  • RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode?

    RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode? RTE, RTO, RTP, ultra segmentation, blind time I am using the ultra segmentation mode to minimize the blind time. But this is not indicated. Is there a way to calculate it? RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode? RTE, RTO, RTP, ultra segmentation, blind time I am using the ultra segmentation

  • Dongle necessary for FS-K96?

    Dongle necessary for FS-K96? FS-K96, FS-K96PC, FSQ, FSG, FSUP, FSV, FSVR, RTO Is an FSPC license dongle (1310.0002.03) always needed to run the FS-K96 software? Dongle necessary for FS-K96? FS-K96, FS-K96PC, FSQ, FSG, FSUP, FSV, FSVR, RTO Is an FSPC license dongle (1310.0002.03) always needed to run the FS-K96 software? Related Products

  • Leackage breaker trips when probe is connected to main line

    Leackage breaker trips when probe is connected to main line RTC, RTB, RTM, RTA, RTE, RTO, Leakage breaker We want to measure the voltage of the main line with our oscilloscope. Leackage breaker trips when probe is connected to main line RTC, RTB, RTM, RTA, RTE, RTO, Leakage breaker We want to measure the voltage of the main line with our oscilloscope. Related Products

Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Download

Please enter your first name.

Please enter a valid email address.

Please enter your name.

Please enter your company name.

Please enter your location.

Marketing permission
Please enter the characters shown in the image
show captcha

The input was not correct.
International Website