Videos

Testing conducted emission in the R&D lab

Use your scope for conducted emission testing. Conducted emissions are electromagnetic disturbances caused by a device and conducted out by interconnects such as the power supply lines. Devices are required to pass stringent limits on the level of such emissions and these tests require expensive testing time at compliance laboratories. This video shows how the powerful spectrum analysis features in

High Precision Power Supplies

The R&S®NGM/L/U come with a linear design, 2 or 4-quadrant operation, high readback resolution, and advanced functionalities. The R&S®NGM/L/U come with a linear design, 2 or 4-quadrant operation, high readback resolution, and advanced functionalities. R&S High Precision Power Supplies The R&S NGM/L/U come with a linear design, 2 or 4-quadrant operation, high readback resolution, and advanced functionalities

Learn what’s new in CISPR 32

The details of the changes to the standard are explained in the video Change history in CISPR 32:2015+AMD1:2019 CSV (Consolidated version): 2nd edition was published on March 31, 2015 In Europe published as EN 55032:2015, became mandatory on May 5th, 2018 in the European Economic Area; listed in the Official Journal (November 3rd, 2020). CISPR 32 The details of the changes to the standard are explained

5G is now – How 5G NR standalone (SA) mode challenges testing

The R&S CMX500 radio communication tester is ideal to perform 5G NR signaling measurements for SA mode. The standalone (SA) mode is one of the main deployment scenarios for 5G NR. The fundamental difference to the non-standalone (NSA) mode is that SA does not rely on an LTE anchor for the exchange of control information between the network and the device. Instead, all signaling information is sent

Deep dive into CERTIUM GATEWAYS

Seamless integration of legacy applications Rohde & Schwarz offers a wide portfolio of gateways for a seamless integration of legacy applications into IP infrastructures. Rohde & Schwarz provides a large gateway portfolio for migration from legacy to IP. It allows radios, VCS and telephony systems to be connected to IP infrastructures by supporting a broad number of interfaces. Gateways enable central

Possibilities provided by the I²C decode protocol

Expert Talk Oscilloscope: I²C bus decoding Dive into your protocol to check for any problems with your I²C interface. Dive into your protocol to check for any problems with your I²C interface. Oscilloscope bus decoding, RTO2000, bus decoding, I2C Dive into your protocol to check for any problems with your I²C interface.

The next generation vector network analyzer

Discover the R&S®ZNB3044, the next-generation vector network analyzer unveiled at EuMW 2025, and learn how its advanced features deliver precise and repeatable RF & microwave testing. Discover the next generation of vector network analysis with the R&S®ZNB3044. At EuMW 2025 in Utrecht, we introduced the new analyzer and highlighted its advanced performance for RF and microwave testing. In this demo

First zone trigger in time and frequency domain

The R&S®RTO oscilloscopes’ zone trigger lets you graphically separate events. The R&S®RTO oscilloscopes’ zone trigger lets you graphically separate events. Define up to eight zones of any shape and logically combine them over multiple channels or by using math functions. Zone trigger, time and frequency domain, RTO2000 The R&S®RTO oscilloscopes’ zone trigger lets you graphically separate events. Define

EMC standards update: RED

Presenter: Feng Xie, Rohde & Schwarz This video highlights latest developments in relevant EMC standards focusing on the latest news from CE Radio Equipment Directive (RED) covering ETSI EN standards for Wi-Fi, cellular technologies and EU guideline for E112 emergency service. This video highlights latest developments in relevant EMC standards focusing on the latest news from CE Radio Equipment Directive

Employee interview: Hardware developer Simon 200_69226

Meet our hardware developer Simon, who realized from day one that Rohde & Schwarz is his company to work for. Meet our hardware developer Simon, who realized from day one that Rohde & Schwarz is his company to work for. hardware, development, devices, future, components, work, job, career Employee interview: Hardware developer Simon

First test solution for NB-IoT Rel.14 positioning presented at GSMA MWC 2018

Rohde & Schwarz presented world's first test solution for 3GPP Rel.14 NB-IoT location services at the GSMA Mobile World Congress 2018 in Barcelona. Rohde & Schwarz presented world's first test solution for 3GPP Rel.14 NB-IoT location services at the GSMA Mobile World Congress 2018 in Barcelona. MWC2018, TS-LBS, CWMcards, CMW500, LBS test, NB-IoT positioning, Rel14 positioning test, OTDOA, 3GPP, Release

EMC+SIPI debug challenge - Elizabeth McKenna

EMC+SIPI debug challenge - Elizabeth McKenna EMC+SIPI debug challenge - Elizabeth McKenna

R&S®HE400 Antenna video

Highly accurate bearing determination in the cellular bands with the R&S®HE400CEL cellular mudule. Highly accurate bearing determination in the cellular bands with the R&S®HE400CEL cellular mudule. R&S®HE400, Antenna video Highly accurate bearing determination in the cellular bands with the R&S®HE400CEL cellular mudule.

CMX500 for non-terrestrial networks: Enabling the future of connectivity

Speaker: Tim Seyler, Product Manager Mobile Radio Tester Rohde & Schwarz This session showcases how the CMX500 enables efficient NTN network emulation with multiorbit and multiband support, integrated channel fading, and advanced tools like Constellation Insight to streamline testing and accelerate innovation in satellite communications. Explore NTN network emulation with the CMX500, an all-in-one

Webinar: CAN bus debugging with an oscilloscopes

presented by Dr. Ernst Flemming, Rohde & Schwarz This webinar explores the topic of debugging CAN bus interfaces by using an oscilloscope. We will be talking about topics such as sources of bus errors, EMI debug correlation with protocol decode, boot cycle testing, application specific triggering, eye measurements and more. This webinar explores the topic of debugging CAN bus interfaces by using an