Download Center

Provides information on security issues when working with R&S®FSH4/8 in secure areas.

English - 29 Nis 2019

Describes the types of memory and their usage in the R&S®FSH and issues when working in secured environments.

English - 10 Mar 2017

Provides information on security issues when working with R&S®NRT-Z14/-Z44 or R&S®FSH-Z14/-Z44 in secure areas.

English - 15 Nis 2025

FSH4Remote is a free-of-charge program for connecting the R&S®FSH4/8 handheld spectrum analyzer or the R&S®FSC spectrum analyzer to a remote computer, and for providing remote control of the functions from the computer. It runs under Windows and Linux operating systems. This application note describes the easy use of FSH4Remote to control the R&S®FSH/FSC and read the trace.

English - 8 Şub 2012

Provides the information needed to set up the R&S®FSH3-TV analyzer and start working with it.

English - 8 Mar 2006

This application note describes an effective method for generating test setups, performing measurements and producing test reports with the hand-held Spectrum Analyzer R&S FSH3

English - 31 Oca 2003

This application note explains how to perform LTE base station measurements over the air (OTA) using the R&S®FSH4/8/13/20 handheld spectrum analyzer. It describes the required measurement setup and explains the results obtained with the different measurement modes.

English - 12 Eyl 2013

Provides the information required to prepare the instrument for use and start working.

English - 1 Eyl 2007

Describes the remote control commands with programming examples.

English - 4 Ara 2009

Describes the specific functions of the accessory.

English - 7 Oca 2013

Describes all instrument functions.

English - 28 Ağu 2007

DOCSIS has become the established standard for return channels when it comes to implementing interactive services in broadband cable networks. The quality of these signals is essential to network efficiency. The analysis can be done using the highprecision R&S®ETL, R&S®EFA and R&S®FSH3-TV TV test receivers that have proven themselves in the downstream. These T & M instruments can be quickly and easily configured for measuring the upstream.

English - 13 Tem 2012

This application note explains how to detect, characterize, find and document interferers in cellular networks using the R&S®FSH spectrum analyzer.First it explains how to use the spectrum and interference analysis functions during each step of interference hunting. It also illustrates the explanations with a common interferer example. Then it points out the most common interference sources in cellular networks and gives tips on how to identify them.

English - 21 Eki 2014

Describes the remote control commands with programming examples.

English - 17 Tem 2024

Describes all instrument functions for the base unit and optional firmware applications.

English - 12 Eyl 2025

English - 7 Şub 2011

English - 22 Tem 2020

Provides the information required to prepare the instrument for use and start working.

English - 12 Şub 2025

English - 22 Tem 2020

English - 7 Kas 2025

English - 4 May 2026

The voltage standing wave ratio (VSWR) is one of the parameters in RF systems that measures the impedance mismatch. Under ideal conditions, when the load is perfectly matched to the source, the VSWR will be 1. A mismatch in the system causes reflections that will increase the VSWR and lead to losses in transmission. Although most RF components are typically designed and specified with a characteristic impedance of 50 Ω , applications and system components for cable television are designed and specified with a characteristic impedance of 75 Ω . This application note describes the measurement procedure for VSWR measurements in 75 Ω systems using the R&S®FSH3-TV handheld TV analyzer.

English - 1 Mar 2008

Describes the functionality of the software.

English - 28 Eki 2019

Contains the datasheet specifications and describes the handling of the antennas.

English - 16 Eyl 2016

The Application Note summarises all measurements for WLAN test, according to the IEEE Standards 802.11a, b and g. For each measurement, an instrument list, test setups, test method, comments, typical results and implementation hints are included. The enclosed free of charge software provides all IEEE 488 bus sequences ready to run or copy into your own test environment.

English - 28 Tem 2004