R&S®TS-PSM4 Power Switching Module

Power multiplexer and DUT power switching module

  • Обзор

Key Facts

  • Twelve power channels for currents up to 16 A
  • Eight medium-power channels for currents up to 2 A
  • Switching voltage up to 30 V

Brief Description

The R&S®TS-PSM4 is the innovative implementation of a rugged, modular switching device for integrating supply current switching into your test system.

Features Collapsed

  • Ruggedized mechanical construction
  • Industrially approved Virginia Panel Corp. power connector available for sophisticated test receiver deployment
  • Suitable Virginia Panel Corp. GEMINI test receivers available for the R&S®TSVP chassis

Specifications

Interface
Control bus CAN 2.0b (1 Mbit/s)
Rear I/O connector CompactPCI, 110 pins

Key Facts

  • Twelve power channels for currents up to 16 A
  • Eight medium-power channels for currents up to 2 A
  • Switching voltage up to 30 V
  • Integrated current measurement via shunt resistors and analog bus coupling
  • Rear I/O access to the power signals for unique flexibility during system integration and seamless adaptation to power supplies and loads within a system paradigm based on R&S®PowerTSVP
  • Unique comprehensive selftest and measurement of relay contact resistance
  • Support by the R&S®TS-LSRL signal routing library provides intelligent and secure switch path computing

Brief Description

The R&S®TS-PSM4 is the innovative implementation of a rugged, modular switching device for integrating supply current switching into your test system.

The R&S®TS-PSM4 power switching module was developed to add high-current switching up to 16 amps to the standard functionality of the R&S®TSVP test system versatile platform.

Powerful and flexible switching capabilities are combined with ruggedized signal connection and high availability secured by switching cycle monitoring. The R&S®TS-PSM4 can be used in both the R&S®CompactTSVP (R&S®TS-PCA3) and the R&S®PowerTSVP (R&S®TS-PWA3).

A switch cycle counter for reliable operation and monitoring strain of the relays is implemented by an FRAM accessible by the on-board microprocessor. Readings can be retrieved from the module via the IVI switch driver.

Features & Benefits

  • Key features
    • Ruggedized mechanical construction
    • Industrially approved Virginia Panel Corp. power connector available for sophisticated test receiver deployment
    • Suitable Virginia Panel Corp. GEMINI test receivers available for the R&S®TSVP chassis
    • High-quality cage clamp terminal blocks for reliable power cabling and convenient dismantling
    • Switch cycle counter
  • Typical applications
    • Distribution of a power supply to multiple DUTs
    • Flexible distribution of power supplies to DUTs including sense lines via medium-power relays
    • Switching of DUT supplies and loads with optional current measurement via shunt resistors
    • Routing of measurement signals to adjacent modules via analog measurement bus
    • Automotive and general purpose switch simulation

Specifications

Specifications
Application in the R&S®TSVP platform R&S®CompactTSVP or R&S®PowerTSVP one slot on front
Interface
Control bus CAN 2.0b (1 Mbit/s)
DUT connector (front) model.02 none
model.03 Virginia Panel connector:
  • micro power
  • module receiver
  • 50 positions contacts:
  • micro power, receiver, 12 AWG
Rear I/O connector CompactPCI 110 pins
power 12 pins
Channel switching characteristics
Power channels1)
Switch paths 12 channels
Relay type Zettler AZ987
Switching voltage DC 30 V (max.)
Switching current 16 A (max.)
Switching power DC 480 W (max.)
Operate/release time < 4 ms (typ.)
Medium-power channels
Switch paths 8 channels
Relay type AxiCom IM03
Switching voltage DC 30 V (max.)
AC (peak) 46 V (max.)
Switching current 2 A (max.)
Switching power DC 60 W (max.)
AC 62.5 VA (max.)
Operate/release time < 6 ms (typ.)
Analog measurement bus access and coupling relays
Switching voltage DC 30 V (max.)
AC (peak) 46 V (max.)
Switching current 1 A (max.)
Switching power DC 10 W (max.)
AC 10 VA (max.)
Operate/release time < 0.5 ms (typ.)
Conditions
Temperature range +23 °C ±5 °C
Additional error specified by the temperature coefficient in the range +5 °C to +18 °C and
+28 °C to +40 °C
Warm-up 30 minutes
Shunt resistor (power channels)
Nominal value 5 mΩ
Accuracy correction values included,
measured by R&S®TS-PSAM
±(1 % + 32 mA)
Temperature coefficient shunt resistor ±50 ppm/K
Shunt resistor (medium power channels)
Nominal value 22 mΩ
Accuracy correction values included, measured by R&S®TS-PSAM ±(1 % + 4 mA)
Temperature coefficient shunt resistor ±75 ppm/K
General data
Power consumption reset state 5 V/0.22 A
all CHx relays activated, one channel connected to analog bus 5 V/1.4 A
Environmental conditions
Temperature operating temperature range +5 °C to +40 °C
storage temperature range –10 °C to +60 °C
Damp heat +40 °C, 80 % rel. humidity, steady state, in line with EN 60068-2-30
Mechanical resistance
Vibration sinusoidal 5 Hz to 55 Hz, 0.15 mm amplitude const.,
55 Hz to 150 Hz, 0.5 g const.,
in line with EN 60068-2-6
random 10 Hz to 300 Hz, acceleration 1.2 g (RMS),
in line with EN 60068-2-64
Shock 40 g shock spectrum, in line with MIL-STD-810E,
method 516.4, procedure I
Product conformity
Electromagnetic compatibility EU: in line with EMC Directive 2004/108/EC applied harmonized standards:
EN 61326-1 (industrial environment),
EN 61326-2-1,
EN 55011 (class A),
EN 61000-3-2,
EN 61000-3-3
Electrical safety EU: in line with
Low Voltage Directive 2006/95/EC
applied harmonized standard:
in line with EN 61010-1
Dimensions (W × H × D) R&S®TS-PSM4B model.02 20 mm × 174 mm × 316 mm (0.79 in × 6.85 in × 12.44 in)
R&S®TS-PRIO2 20 mm × 130 mm × 180 mm (0.79 in × 5.12 in × 7.09 in)
Weight R&S®TS-PSM4B model.02 570 g (1.26 lb)
R&S®TS-PSM4 model.03 860 g (1.90 lb)
R&S®TS-PRIO2 125 g (0.28 lb)
Calibration interval recommended for highest accuracy 24 months
Благодарим вас.

Ваш запрос был успешно отправлен!

Мы свяжемся с Вами в ближайшее время.

Коллектив Rohde & Schwarz

Получить на тест

Введите текст запроса.
Введите свое имя.
Введите свое имя.
Введите действующий адрес электронной почты.
Введите название компании.
Введите город.
Введите почтовый индекс.

Укажите свою страну.
Введите символы, показанные на изображении
show captcha
Введена недействительная информация.
Do not enter data in this field
Благодарим вас.

Ваш запрос был успешно отправлен!

Мы свяжемся с Вами в ближайшее время.

Коллектив Rohde & Schwarz

Узнать цену

Введите текст запроса.
Введите свое имя.
Введите свое имя.
Введите действующий адрес электронной почты.
Введите название компании.
Введите город.
Введите почтовый индекс.
Введите номер телефона.

Укажите свою страну.
Введите символы, показанные на изображении
show captcha
Введена недействительная информация.
Do not enter data in this field
Благодарим вас.

Ваш запрос был успешно отправлен!

Мы свяжемся с Вами в ближайшее время.

Коллектив Rohde & Schwarz

Запросить информацию

Введите текст запроса.
Введите свое имя.
Введите свое имя.
Введите действующий адрес электронной почты.
Введите название компании.
Введите город.
Введите почтовый индекс.

Укажите свою страну.
Введите символы, показанные на изображении
show captcha
Введена недействительная информация.
Do not enter data in this field
International Website