Multichannel and bit stream radiomonitoring signal analyzers from Rohde & Schwarz are crafted to meet the high demands of modern radio communication.

Brief descriptionR&S®CA100 is a standalone software solution for analysis, classification, demodulation and decoding of digital and analog IF signals. The software provides powerful signal analysis and signal processing functions and runs on a Windows PC. If connected to modern monitoring receivers with internal digital downconverters (DDC), e.g.

R&S®CA100 is a standalone software solution for analysis, classification, demodulation and decoding of digital and analog IF signals. The software provides powerful signal analysis and signal processing functions and runs on a Windows PC. If connected to modern Rohde & Schwarz monitoring receivers with internal digital downconverters (DDC), e.g. R&S®ESME or R&S®ESMD, up to four signals can be processed in parallel.

English (PD 3607.1571.82)

English (PD 3607.0198.62)

(DDC)Time and frequency domain signal analysis for determining technical parametersCovering the measurement methods specified in the ITU-R SM.1600 recommendationAutomatic detection of signals in wideband signal scenariosAutomatic recognition of modulation parameters including channel code/transmission system classificationComprehensive library of demodulators and decoders (in combination with R&S®CA100

softwareOnline LAN transfer from an R&S®EM100 to a PC and to the R&S®CA100 analysis software, for example, to operate an efficient small system for signal reception and analysisRecording of captured data using R&S®CA100; provision of data for documentation, replay or subsequent additional evaluationRemote control of all receiver functions via LAN interface (SCPI command set in line with IEEE 488.2

analysis software, for example, for operating an efficient small system for signal reception and analysisOnline analysis or recording of captured data using R&S®CA100, provision of data for documentation, replay or subsequent additional evaluationITU-compliant signal analysis in line with ITU-R SM.1600 using R&S®CA100 and R&S®CA100IS, optimum tool for single-channel analysis and measurement of analog

analysis software, for example, to operate an efficient small system for signal reception and analysisRecording of captured data using R&S®CA100; provision of data for documentation, replay or subsequent additional evaluationRemote control of all receiver functions via LAN interface (SCPI command set in line with IEEE 488.2)LAN interface for providing the maximum measured data rate during receiver

Цифровой пеленгатор R&S®DDF260 — превосходные характеристики в сильно перегруженных средах передачи сигналов

Широкополосный мониторинговый приемник R&S®ESME обеспечивает надежный высокопроизводительный мониторинг спектра в диапазоне от 8 кГц до 40 ГГц даже в условиях высокой плотности сигналов.

Цифровой широкополосный регистратор DWR150 — цифровой широкополосный регистратор с полосой пропускания до 125 МГц для записи и воспроизведения I/Q-данных и результатов

Цифровой широкополосный регистратор DWR100 — цифровой широкополосный регистратор для записи и воспроизведения I/Q-данных и результатов с полосой пропускания до 40 МГц

Цифровой компактный мониторинговый приемник R&S®EM200 — экономически эффективное оптимальное решение для геолокации и мониторинга спектра в режиме дистанционного управления. Он обнаруживает, анализирует, демодулирует и локализует излучения в диапазоне от 8 кГц до 8 ГГц.

Широкополосный регистратор I/Q-данных R&S®IQW — универсальный прибор для быстрого и надежного выполнения записи, хранения и воспроизведения широкополосных потоков I/Q-данных в реальном масштабе времени.

Innovative DF antennas Features & BenefitsFast spectrum monitoring with scan speeds of up to 12 GHz/sDisplay and demodulation of signals with up to 20 MHz bandwidthWideband DF antennas and DC power supply capability for mobile operationParallel monitoring and demodulation of one plus three signals within realtime bandwidthOnline signal analysis with live streaming over LAN interface, e.g. with R&S®CA100

R&S® ADD307 (550 MHz to 690 MHz) upon requestReceive Mode Frequency range with separate receiving antenna 9 kHz to 7,5 GHz Scan speed with R&S® DDF007-PS or R&S® EM100-PS options up to 2 GHz/s IF spectrum display range selectable up to 10 MHz Demodulation bandwidth selectable up  to 500 kHz Enhanced signal analysis capability with R&S® CA100 yesGeneral specifications Lithium-ion battery pack operating

sensitivity and signal resolution (compared with conventional analog receivers)Analog-modulated signals demodulated directly in the receiver; contents audible using headphones or built-in loudspeakerDigitally modulated signals converted to the baseband using I/Q demodulation and stored in the receiver or exported via LANOnline and offline analysis of digitally modulated signals, e.g. with the R&S®CA100

программных приемника в одном приборе благодаря четырем каналам демодуляции (во всей полосе пропускания реального масштаба времени)Вывод демодулированных данных через интерфейс LAN в виде отдельных потоков данныхEthernet-интерфейс LAN 1 Гбит/с для дистанционного управления приемником и обработки результатов с помощью системного ПО от компании Rohde & Schwarz (например, R&S®ARGUS 6.1, R&S®RAMON, R&S®CA100

R&S®ARGUS 6.1, R&S®RAMON, R&S®CA100)R&S®RX-10G option: retrofittable 10 Gbit Ethernet LAN interfaceDocumented interface description for flexible programming and data processing, even with customerspecific software packageR&S®ESMD-Control software package (included in scope of delivery) for receiver remote control via 1 Gbit LAN interfaceDocumentation of results on a PC (e.g. spectra and audio content

The R&S®CA210 is a software solution for the technical offline analysis of recorded signals and wideband signal scenarios. It provides analysis functions for fixed-frequency emissions as well as for the investigation of burst transmissions.

The R&S®DWR150 digital wideband recorder is the ideal solution for storing data when there is not enough time or resources available to analyze or process a live RF scenario during tactical and strategic reconnaissance. It is a compact, lightweight instrument for fixed and mobile solutions. The recordings are stored on easily exchangeable, server-grade solid-state drives (SSD). The multichannel, multiclient recorder can be used for recording various data formats in parallel. It provides the functionality of a loop buffer for analyzing recorded signals.

The R&S®DWR100 digital wideband recorder is the ideal solution for storing data when there is not enough time or resources available to analyze or process a live RF scenario during tactical and strategic reconnaissance. It is a compact, lightweight instrument for fixed and mobile solutions. The recordings are stored on easily exchangeable, server-grade solid-state drives (SSD). The multichannel, multiclient recorder can be used for recording various data formats in parallel. It provides the functionality of a loop buffer for analyzing recorded signals.

English (PD 3607.0300.12)

English (PD 5214.3723.12)

English (PD 5214.3800.12)

The R&S®DDF260 digital direction finder is ideal for high-performance ITU-compliant spectrum monitoring, signal analysis and multichannel digital data streaming from 8 kHz to 40 GHz in combination with highly accurate angle of arrival (AOA) direction finding from 300 kHz to 8.2 GHz. Thanks to its exceptional RF performance, the R&S®DDF260 provides cutting-edge signal detection and measurement capabilities even in high-density spectrum environments.

The R&S®ESME wideband monitoring receiver is ideal for high-performance ITU-compliant spectrum monitoring, signal analysis and multichannel digital data streaming from 8 kHz to 40 GHz. In combination with Rohde & Schwarz single-channel direction finding (DF) antennas, it optionally supports angle of arrival (AOA) direction finding from 300 kHz to 8.2 GHz. Thanks to its exceptional RF performance, the R&S®ESME provides cutting-edge signal detection and measurement capabilities even in high-density spectrum environments.

The R&S®MP007 direction finding system is based on the R&S®DDF007 portable direction finder upgrade kit in combination with the R&S®ADDx07 compact DF antennas. The result is a unique combination of functionality and performance in a system of this size.

The R&S®EB510 HF monitoring receiver is designed to meet the demanding requirements of ITU-compliant radiomonitoring tasks in stationary and mobile environments The receiver performs high-speed signal searching in the spectrum and provides very wideband demodulation as well as a spectrum overview. It can be operated via the front panel or via remote control software. It is the ideal choice for a large variety of applications – from single-station measurements to nationwide monitoring systems.