R&S®ZNB - FAQ

Results 45
  • Remote Desktop connection

    Remote Desktop connection ZNC3, ZNB, Remote Desktop connection Remote Desktop connection ZNC3, ZNB, Remote Desktop connection Related Products

  • TRL calibration - middle of line or end of line

    TRL calibration - middle of line or end of line FAQ, ZVA, ZNB, TRL calibration - middle of line or end of line TRL calibration - middle of line or end of line TRL calibration - middle of line or end of line FAQ, ZVA, ZNB, TRL calibration - middle of line or end of line TRL calibration - middle of line or end of line Related Products

  • Bias tee limits and calibration considerations

    Bias tee limits and calibration considerations ZNB Bias tee limits and calibration considerations Bias tee limits and calibration considerations ZNB Bias tee limits and calibration considerations Related Products

  • How do I calculate the logarithmic frequency steps for the horizontal axis?

    How do I calculate the logarithmic frequency steps for the horizontal axis? Calculate logarithmic frequency, horizontal axis, log frequency steps, FSW, FSV, FSVA, ZNA, ZNB, ZNL, ZND, ZVA, FPL How do I calculate these frequency points when I have a logarithmic sweep and know the center frequency, the span and the number of sweep points? How do I calculate the logarithmic frequency steps for the horizontal

  • Installing a USB-GPIB adapter

    Installing a USB-GPIB adapter ZNB, ZNC, Installing a USB-GPIB adapter Installing a USB-GPIB adapter ZNB, ZNC, Installing a USB-GPIB adapter Related Products

  • External generator connected via USB not correctly recognized

    External generator connected via USB not correctly recognized ZNB, External generator connected via USB not correctly recognized External generator connected via USB not correctly recognized ZNB, External generator connected via USB not correctly recognized Related Products

  • The MINUS key on the keypad does not work

    The MINUS key on the keypad does not work ZNB The MINUS key on the keypad does not work. The MINUS key on the keypad does not work ZNB The MINUS key on the keypad does not work. Related Products

  • Remote control autocalibration with a calibration unit

    Remote control autocalibration with a calibration unit ZNB, ZNBT Remote control autocalibration with a calibration unit Remote control autocalibration with a calibration unit ZNB, ZNBT Remote control autocalibration with a calibration unit Related Products

  • ASCII export of displayed trace values

    ASCII export of displayed trace values ZNB ZNB, ASCII export of displayed trace values ASCII export of displayed trace values ZNB ZNB, ASCII export of displayed trace values Related Products

  • Calibration of two channels simultaneously with remote commands

    Calibration of two channels simultaneously with remote commands FAQ, ZVA, ZNA, ZNB, ZND, Multi Channel Calibration Calibration of two channels simultaneously with remote commands Calibration of two channels simultaneously with remote commands FAQ, ZVA, ZNA, ZNB, ZND, Multi Channel Calibration Calibration of two channels simultaneously with remote commands Related Products

  • Can the option ZNB-B10 be installed in the field?

    Can the option ZNB-B10 be installed in the field? FAQ, ZNB, ZNB options, ZNB-B10 Can the option ZNB-B10 be installed in the field? Can the option ZNB-B10 be installed in the field? FAQ, ZNB, ZNB options, ZNB-B10 Can the option ZNB-B10 be installed in the field? Related Products

  • Automatically restart with return of the AC power

    Automatically restart with return of the AC power FAQ, ZNA, ZNB, automatically restart, AC power Is it possible to automatically restart a ZNB with return of the AC power? Automatically restart with return of the AC power FAQ, ZNA, ZNB, automatically restart, AC power Is it possible to automatically restart a ZNB with return of the AC power? Related Products

  • ZNB Limit Line display difference on screen and while printing

    ZNB Limit Line display difference on screen and while printing ZNB, ZNB4, ZNB8, ZNB20, ZNB40 What can I do to avoid that difference between my screen and the print? ZNB Limit Line display difference on screen and while printing ZNB, ZNB4, ZNB8, ZNB20, ZNB40 What can I do to avoid that difference between my screen and the print? Related Products

  • Apply an offset to a limit line

    Apply an offset to a limit line ZNA, ZNB, ZND, offset, timeline I have an existing limit line. Is it possible to apply a vertical offset? Apply an offset to a limit line ZNA, ZNB, ZND, offset, timeline I have an existing limit line. Is it possible to apply a vertical offset? Related Products

  • Query of the x-values (frequency) of a trace

    Query of the x-values (frequency) of a trace Query of x-values, (frequency) of a trace, ZVA, ZVB, ZNA, ZNB, ZND I query the values of a trace using scpi commands. But I get the y-values only. Is there a possibility to get the y-values also (frequency)? Query of the x-values (frequency) of a trace Query of x-values, (frequency) of a trace, ZVA, ZVB, ZNA, ZNB, ZND I query the values of a trace using

  • Query the data of all traces at once

    Query the data of all traces at once ZNA, ZVA, ZNB, ZND, trace data query Is there a way to query the data of all traces at once? Query the data of all traces at once ZNA, ZVA, ZNB, ZND, trace data query Is there a way to query the data of all traces at once? Related Products

  • ZNB - Warning "Calibration does not cover all traces"

    ZNB - Warning "Calibration does not cover all traces" ZNB, Calibration, Cal Unit When I start a calibration with an auto cal unit I get the following warning. What does that mean? ZNB - Warning "Calibration does not cover all traces" ZNB, Calibration, Cal Unit When I start a calibration with an auto cal unit I get the following warning. What does that mean? Related Products

  • ZNB – Channel Bits setting with remote commands

    ZNB – Channel Bits setting with remote commands ZNB, Channel Bits I am using the command “CONT:AUX:C x” to see when a channel is active. But the respective pin at the AUX connector does not switch to “high”. ZNB – Channel Bits setting with remote commands ZNB, Channel Bits I am using the command “CONT:AUX:C x” to see when a channel is active. But the respective pin at the AUX connector does not switch

  • ZNB series Remote Desktop and Hard Keys

    ZNB series Remote Desktop and Hard Keys ZNB, Remote Desktop Is there a way to use the hard keys when using the ZNB via Remote Desktop connection? On my unit I only see the standard menu to the lower left side of the device, but have no access to the "master keyboard" ZNB series Remote Desktop and Hard Keys ZNB, Remote Desktop Is there a way to use the hard keys when using the ZNB via Remote Desktop

  • Save/recall files: own folder in 'Look In'

    Save/recall files: own folder in 'Look In' ZNC; ZNB Save/recall files: own folder in 'Look In' Save/recall files: own folder in 'Look In' ZNC; ZNB Save/recall files: own folder in 'Look In' Related Products

  • SCPI remote error message on the display

    SCPI remote error message on the display ZNB, ZNC SCPI remote error message on the display SCPI remote error message on the display ZNB, ZNC SCPI remote error message on the display Related Products

  • Store several diagrams in one file and each diagram on its own page

    Store several diagrams in one file and each diagram on its own page ZNB, ZND, ZNBT, ZNC Store several diagrams in one file and each diagram on its own page Store several diagrams in one file and each diagram on its own page ZNB, ZND, ZNBT, ZNC Store several diagrams in one file and each diagram on its own page Related Products

  • Remote Desktop screen size of ZNB/ZND

    Remote Desktop screen size of ZNB/ZND ZNB,ZND, Remote Desktop Remote Desktop screen size of ZNB/ZND Remote Desktop screen size of ZNB/ZND ZNB,ZND, Remote Desktop Remote Desktop screen size of ZNB/ZND Related Products

  • ZNB - print to file command does not work anymore

    ZNB - print to file command does not work anymore ZNB, ZND, print to file ZNB - print to file command does not work anymore ZNB - print to file command does not work anymore ZNB, ZND, print to file ZNB - print to file command does not work anymore Related Products

  • Is the auto cal unit ZV-Z53 with 75 Ohms accepted from ZNB/ZND/ZVA?

    Is the auto cal unit ZV-Z53 with 75 Ohms accepted from ZNB/ZND/ZVA? FAQ, auto cal unit ZV-Z53, ZNB, ZND, ZVA I want to do a calibration with 75 Ohms at the ZNB/ZND/ZVA. Do these VNAs accept the auto cal unit ZV-Z53 with 75 Ohms impedance? Is the auto cal unit ZV-Z53 with 75 Ohms accepted from ZNB/ZND/ZVA? FAQ, auto cal unit ZV-Z53, ZNB, ZND, ZVA I want to do a calibration with 75 Ohms at the ZNB/ZND

  • VNA calibration warning that the active cal kit does not contain all needed standards

    VNA calibration warning that the active cal kit does not contain all needed standards ZNB, ZNA, VNA, calibration warning, active cal kit Active cal kit or cal unit does not contain all standards needed for selected cal procedure. VNA calibration warning that the active cal kit does not contain all needed standards ZNB, ZNA, VNA, calibration warning, active cal kit Active cal kit or cal unit does not

  • VNA - do I really need a sliding match for calibration?

    VNA - do I really need a sliding match for calibration? ZNA, ZNB, ZVA, sliding match, VNA, calibration VNA - do I really need a sliding match for calibration? VNA - do I really need a sliding match for calibration? ZNA, ZNB, ZVA, sliding match, VNA, calibration VNA - do I really need a sliding match for calibration? Related Products

  • Improve the calibration procedure for different setups

    Improve the calibration procedure for different setups FAQ: Improve the calibration procedure for different setups Improve the calibration procedure for different setups Improve the calibration procedure for different setups FAQ: Improve the calibration procedure for different setups Improve the calibration procedure for different setups Related Products

  • Export complex data of a trace with mathematics and time gating

    Export complex data of a trace with mathematics and time gating ZNA, ZNB, ZND, export complex data Export complex data of a trace with mathematics and time gating. Export complex data of a trace with mathematics and time gating ZNA, ZNB, ZND, export complex data Export complex data of a trace with mathematics and time gating. Related Products

  • ZNB Error Message "..calkit does not comply with readable calibration kit file formats"

    ZNB Error Message "..calkit does not comply with readable calibration kit file formats" ZNB, TRL calibration kit I have used my TRL calibration kit with my ZVA before. Now I want to use also with my ZNB. But when I try to load the data of the calibration kit into the ZNB, the above error message is shown. ZNB Error Message "..calkit does not comply with readable calibration kit file formats" ZNB, TRL

  • VNA remote handling of measurements results using SCPI commands

    VNA remote handling of measurements results using SCPI commands ZNB, ZNA, SCPI Matlab Visa Remote touchstone s2p trace The user is requested to move results from a Network Analyzer to the controller PC or to a network drive. VNA remote handling of measurements results using SCPI commands ZNB, ZNA, SCPI Matlab Visa Remote touchstone s2p trace The user is requested to move results from a Network Analyzer

  • ZNB - How to disable Sweep Position Display Symbols

    ZNB - How to disable Sweep Position Display Symbols ZNB, Sweep Position Display Symbols ZNB - How to disable Sweep Position Display Symbols ZNB - How to disable Sweep Position Display Symbols ZNB, Sweep Position Display Symbols ZNB - How to disable Sweep Position Display Symbols Related Products

  • Remote Desktop Connection does not work on my Analyzer

    Remote Desktop Connection does not work on my Analyzer ZNB I want to control my Analyzer using Remote Desktop from my PC. My Analyzer does not react. Remote Desktop Connection does not work on my Analyzer ZNB I want to control my Analyzer using Remote Desktop from my PC. My Analyzer does not react. Related Products

  • ZNx: Marker read out of other traces with remote commands

    ZNx: Marker read out of other traces with remote commands ZNA, ZNB, ZND, Marker result I have several traces with markers in one channel. When I query the result of marker 1 I always get the response of trace 1. How can I get the result of marker 1 for trace 2? ZNx: Marker read out of other traces with remote commands ZNA, ZNB, ZND, Marker result I have several traces with markers in one channel. When

  • Restore the Auto Logon Configuration

    Restore the Auto Logon Configuration FSPx, FSQx, FSUx, ZVBx, ZVAx, ZVTx, ESPIx, ESCI, WINXP, Restore the Auto Logon Configuration Restore the Auto Logon Configuration FSPx, FSQx, FSUx, ZVBx, ZVAx, ZVTx, ESPIx, ESCI, WINXP, Restore the Auto Logon Configuration Related Products

  • ZNB: Power off at sweep end possible?

    ZNB: Power off at sweep end possible? ZNB, Power at sweep ZNB: Power off at sweep end possible? ZNB: Power off at sweep end possible? ZNB, Power at sweep ZNB: Power off at sweep end possible? Related Products

  • ZNA/ZNB: Export all mixed mode S-Parameters

    ZNA/ZNB: Export all mixed mode S-Parameters ZNA, ZNB, S-Parameter ZNA/ZNB: Export all mixed mode S-Parameters ZNA/ZNB: Export all mixed mode S-Parameters ZNA, ZNB, S-Parameter ZNA/ZNB: Export all mixed mode S-Parameters Related Products

  • License Keycode for VNAMUC is not accepted

    License Keycode for VNAMUC is not accepted ZVA, ZVT, ZVB, ZNB FAQ License Keycode for VNAMUC is not accepted License Keycode for VNAMUC is not accepted ZVA, ZVT, ZVB, ZNB FAQ License Keycode for VNAMUC is not accepted Related Products

  • File-Transfer from Device to PC via LAN connection (simple way)

    File-Transfer from Device to PC via LAN connection (simple way) FSW, FSV3000, FSVA3000, FPL, CMW500, CMX500, ZNA, ZNB, ZNL, ESW, ESR, ESRP I have a file on my device. How can I get it in a simple way to my PC? File-Transfer from Device to PC via LAN connection (simple way) FSW, FSV3000, FSVA3000, FPL, CMW500, CMX500, ZNA, ZNB, ZNL, ESW, ESR, ESRP I have a file on my device. How can I get it in a simple

  • ZNB - Calibration Validation always fails

    ZNB - Calibration Validation always fails ZNB, Calibration Validation I have done a calibration and now I want to validate it with an automatic calibration kit. But it always fails. What is wrong? ZNB - Calibration Validation always fails ZNB, Calibration Validation I have done a calibration and now I want to validate it with an automatic calibration kit. But it always fails. What is wrong? Related

  • Reverse sweep / backward sweep

    Reverse sweep / backward sweep ZVA, ZVT, ZNB Reverse sweep / backward sweep Reverse sweep / backward sweep ZVA, ZVT, ZNB Reverse sweep / backward sweep Related Products

  • Calibrating a vector network analyzer (VNA) with different connectors on each port

    Calibrating a vector network analyzer (VNA) with different connectors on each port ZNB; ZVA; ZNC; ZND Calibrating a vector network analyzer (VNA) with different connectors on each port Calibrating a vector network analyzer (VNA) with different connectors on each port ZNB; ZVA; ZNC; ZND Calibrating a vector network analyzer (VNA) with different connectors on each port Related Products

  • ZNB - several channels with external trigger

    ZNB - several channels with external trigger ZNB, trigger ZNB - several channels with external trigger ZNB - several channels with external trigger ZNB, trigger ZNB - several channels with external trigger Related Products

  • Manage the preset conditions for ZNB network analyzer remotely

    Manage the preset conditions for ZNB network analyzer remotely ZNB, preset conditions, remotely How do I use the driver correctly? Manage the preset conditions for ZNB network analyzer remotely ZNB, preset conditions, remotely How do I use the driver correctly? Related Products

  • Usage of a ZNB as two tone signal generator

    Usage of a ZNB as two tone signal generator ZNB, FAQW, Usage of a ZNB as two tone signal generator I would like to use the ZNB as a signal generator. I need a CW signal on port 1 and port 3 with different frequencies. How can I get that? Usage of a ZNB as two tone signal generator ZNB, FAQW, Usage of a ZNB as two tone signal generator I would like to use the ZNB as a signal generator. I need a CW signal

Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Download

Please enter your first name.

Please enter a valid email address.

Please enter your name.

Please enter your company name.

Please enter your location.

Marketing permission
Please enter the characters shown in the image
show captcha

The input was not correct.
International Website