R&S®FPL1000 spectrum analyzer

Experience high performance wherever you take it

R&S®FPL1000 Spectrum analyzer, front view
Abrir o Lightbox
R&S®FPL1000 Spectrum analyzer
Abrir o Lightbox
R&S®FPL1000 Spectrum analyzer, front view
Abrir o Lightbox
R&S®FPL1000 Spectrum analyzer, side view
Abrir o Lightbox
R&S®FPL1000 Spectrum analyzer, rear view
Abrir o Lightbox
R&S®FPL1000 Spectrum analyzer
Abrir o Lightbox
R&S®FPL1000 Spectrum analyzer, front view
Abrir o Lightbox
R&S®FPL1000 Spectrum analyzer, front view
Abrir o Lightbox
R&S®FPL1000 Spectrum analyzer
Abrir o Lightbox
R&S®FPL1000 Spectrum analyzer, front view R&S®FPL1000 Spectrum analyzer R&S®FPL1000 Spectrum analyzer, front view R&S®FPL1000 Spectrum analyzer, side view R&S®FPL1000 Spectrum analyzer, rear view R&S®FPL1000 Spectrum analyzer R&S®FPL1000 Spectrum analyzer, front view R&S®FPL1000 Spectrum analyzer, front view R&S®FPL1000 Spectrum analyzer

Key facts

  • Frequency range 5 kHz to 7.5 GHz
  • SSB phase noise: typ. –108 dBc (1 Hz) at 10 kHz (1 GHz carrier) offset
  • DANL with preamplifier: typ. –166 dBm from 10 MHz to 2 GHz
  • Lightweight with small footprint
  • 40 MHz analysis bandwidth (option)
  • R&S signal & spectrum analyzer | 3 years warranty extension

Brief description

In an RF lab, the R&S®FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.

Features & benefits

One instrument for multiple applications

A single measuring instrument for many types of measurements

You can use the R&S®FPL1000 for spectral measurements, for highly accurate power measurements with power sensors and for analyzing analog and digitally modulated signals.

FPL1000 signal and spectrum analyzer
Open Lightbox

Measurement modes

Solid RF performance

Low phase noise and low displayed average noise level

Featuring a phase noise of typ. –108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of typ. +20 dBm, 1 Hz to 10 MHz resolution bandwidth and typ. –166 dBm displayed average noise level, the R&S®FPL1000 is comparable to higher class analyzers. This makes it the ideal tool for use in the lab, in production and for service tasks.

FPL1000 signal and spectrum analyzer
Open Lightbox

Phase noise measurement

Intuitive user interface

Operation as intuitive as using a smartphone

You can configure the instrument and perform measurements with the touchscreen. A one-finger swipe across the screen adjusts the center frequency or the reference level. Two-finger gestures adjust the displayed span or level range.

FPL1000 signal and spectrum analyzer
Open Lightbox

Multiview of the R&S®FPL1000

Fully portable

It can be used almost everywhere…

Due to its low weight of 6 kg, it’s optional battery pack that provides three hours of operation without mains supply and it’s carrying bag and shoulder harness you can use the R&S®FPL1000 signal and spectrum analyzer wherever you need it

FPL1000 signal and spectrum analyzer
Open Lightbox

Carrying bag for R&S®FPL1000

Available models

Available models

  • Product Name

    R&S®FPL1003

    Order number 1304.0004.03

    Frequency range
    5 kHz to 3 GHz
    Analysis bandwidth
    40 MHz (FPL1-B40)
    DANL PreAmp ON, f < 3 GHz
    typ. –165 dBm
    DANL PreAmp ON, f = 7.5 GHz
    -
    SSB phase noise f = 1 GHz, 10 kHz offset
    typ. –108 dBc (1 Hz)
  • Product Name

    R&S®FPL1007

    Order number 1304.0004.07

    Frequency range
    5 kHz to 7.5 GHz
    Analysis bandwidth
    40 MHz (FPL1-B40)
    DANL PreAmp ON, f < 3 GHz
    typ. –165 dBm
    DANL PreAmp ON, f = 7.5 GHz
    typ. –158 dBm
    SSB phase noise f = 1 GHz, 10 kHz offset
    typ. –108 dBc (1 Hz)
Specifications
FPL1000 Specifications
Frequency
Frequency range R&S®FPL1003 5 kHz to 3 GHz
  R&S®FPL1007 5 kHz to 7.5 GHz
Frequency resolution   0.01 Hz
Bandwidth
Resolution bandwidth (–3 dB) sweep filters 100 kHz to 10 MHz in 1/2/3/5 sequence
  FFT filters 1 Hz to 50 kHz in 1/2/3/5 sequence
Signal analysis bandwidth (equalized) standard nom. 10 MHz
  with R&S®FPL1-B40 option nom. 40 MHz
Displayed average noise level (DANL)
RF preamplifier off 5 kHz ≤ f < 100 kHz typ. –143 dBm
  100 kHz ≤ f < 5 MHz < –140 dBm, typ. –143 dBm
  5 MHz ≤ f < 3 GHz < –149 dBm, typ. –152 dBm.
  3 GHz ≤ f < 5 GHz < –143 dBm, typ. –146 dBm
  5 GHz ≤ f ≤ 7.5 GHz < –140 dBm, typ. –143 dBm
RF preamplifier on (gain nom. 20 dB) 3 MHz ≤ f < 10 MHz < –155 dBm, typ. –158 dBm
  10 MHz ≤ f < 2 GHz < –163 dBm, typ. –166 dBm
  2 GHz ≤ f < 3 GHz < –162 dBm, typ. –165 dBm
  3 GHz ≤ f < 5 GHz < –158 dBm, typ. –161 dBm
  5 GHz ≤ f < 7 GHz < –156 dBm, typ. –159 dBm
  7 GHz ≤ f < 7.5 GHz < –155 dBm, typ. –158 dBm
Attenuation and Gain
Setting range of attenuator standard 0 dB to 45 dB, in 5 dB steps
  with R&S®FPL1-B25 option 0 dB to 45 dB, in 1 dB steps
PRF preamplifier gain with R&S®FPL1-B22 option nom. 20 dB
Intermodulation
1 dB compression of input mixer (two-tone) RF attenuation 0 dB, RF preamplifier = off nom. +7 dBm
Third-order intercept point (TOI) RF attenuation 0 dB, level 2 × –20 dBm,
∆f > 5 × RBW or 10 kHz, whichever is larger,
RF preamplifier = off
 
  10 MHz ≤ fin < 300 MHz > 13 dBm, typ. 16 dBm
  300 MHz ≤ fin < 3 GHz > 17 dBm, typ. 20 dBm
  3 GHz ≤ fin ≤ 7.5 GHz > 15 dBm, typ. 18 dBm
  with R&S®FPL1-B22 option,
RF attenuation 0 dB, level 2 × –40 dBm,
∆f > 5 × RBW or 10 kHz, whichever is larger,
RF preamplifier = on
 
  5 MHz ≤ fin < 7,5 GHz nom. 0 dBm
Phase noise
SSB phase noise frequency = 1000 MHz, carrier offset  
  100 Hz nom. –88 dBc (1 Hz)
  1 kHz < –99 dBc (1 Hz)
  10 kHz < –105 dBc (1 Hz), typ. –108 dBc (1 Hz)
  100 kHz < –110 dBc (1 Hz), typ. –115 dBc (1 Hz)
  1 MHz < –130 dBc (1 Hz), typ. –135 dBc (1 Hz)
  10 MHz nom. –152 dBc (1 Hz)
Overall Amplitude Accuracy
Total measurement uncertainty signal level 0 dB to –50 dB
below reference level, S/N > 20 dB,
sweep time auto, sweep type = FFT,
RF attenuation 10 dB, 20 dB,
30 dB, 40 dB, RF preamplifier = off,
span/RBW < 100, confidence level 95 %,
+20 °C to +30 °C
0.5 dB
  1 MHz ≤ f < 3 GHz 0.5 dB
  3 GHz ≤ f < 7.5 GHz 0.8 dB

Available options

General
Product Description

R&S®FPL1-B4

Order number 1323.1902.02

Description

OCXO accurate reference frequency

R&S®FPL1-B5

Order number 1323.1883.02

Description

Additional interfaces

R&S®FPL1-B10

Order number 1323.1890.02

Description

GPIB interface

FPL1-B19 - Second hard disk (SSD)

R&S®FPL1-B19

Order number 1304.0427.02

Description

Second hard disk (SSD)

R&S®FPL1-B22

Order number 1323.1719.02

Description

RF preamplifier

R&S®FPL1-B25

Order number 1323.1990.02

Description

1 dB Steps for electronic attenuator

R&S®FPL1-B30

Order number 1323.1877.02

Description

DC Power supply for 12/24 V supply

R&S®FPL1-B31

Order number 1323.1725.02

Description

Li-Ion battery pack

R&S®FPL1-B40

Order number 1323.1931.02

Description

40 MHz analysis bandwidth

Software options
Product Description
FPL1-K7 - AM/FM/φM analog modulation analysis

R&S®FPL1-K7

Order number 323.1731.02

Description

AM/FM/φM analog modulation analysis

R&S®FPL1-K9

Order number 1323.1754.02

Description

Measurements with R&S®NRP power sensors

FPL1-K30 - Noise figure measurements

R&S®FPL1-K30

Order number 1323.1760.02

Description

Noise figure measurements

FPL1-K54 - EMI measurement application

R&S®FPL1-K54

Order number 1323.1783.02

Description

EMI measurement application

The R&S®FPL1-K54 EMI measurement application adds EMI diagnostic functionality to the R&S®FPL signal and spectrum analyzer. The R&S®FPL1-K54 offers EMI bandwidths for commercial and military applications, detectors such as quasi-peak, CISPR-average and RMS-average, limit lines and correction factors. (R&S FPL1-B5 option required)

FPL1-K70 - Vector signal analysis

R&S®FPL1-K70

Order number 1323.1748.02

Description

Vector signal analysis

The R&S®FPL1-K70 vector signal analysis option is a powerful tool for analyzing individual digitally modulated signals down to the bit level.

FPL1-K70M - Multi-modulation analysis

R&S®FPL1-K70M

Order number 1323.1625.02

Description

Multi-modulation analysis

The R&S®FPL1-K70M multicarrier modulation analysis application (R&S®FPL1-K70 option required) allows DVB‑S2X signals to be analyzed.

R&S®FPL1-K70P

Order number 1323.1631.02

Description

BER measurements with PRBS data

The R&S®FPL1-K70P is an extension of the R&S®FPL1-K70 vector signal analysis option that allows the measurement of raw bit error rate (BER) on PRBS data up to PRBS23.

PC software
Product Description
Analog demodulation

R&S®VSE

Order number 1345.1011.06

Description

Vector signal explorer

Brings the experience and power of Rohde & Schwarz signal analysis to PC and cloud

R&S®FSPC

Order number 1310.0002K02

Description

License dongle

VSE-K70_Vector-Signal-Explorer-Software.jpg

R&S®VSE-K70

Order number 1320.7522.06

Description

Vector signal analysis

VSE-K100_Vector-Signal-Explorer-Software.jpg

R&S®VSE-K106

Order number 1320.7900.06

Description

EUTRA/LTE

Narrowband IoT analysis

General accessories
Product Description
FPL1-Z1 - Protective hard cover

R&S®FPL1-Z1

Order number 1323.1960.02

Description

Protective hard cover

FPL1-Z2 - Transport bag, transparent cover

R&S®FPL1-Z2

Order number 1323.1977.02

Description

Transport bag, transparent cover

FPL1-Z3 - Carrying vest holster

R&S®FPL1-Z3

Order number 1323.1683.02

Description

Carrying vest holster

FPL1-Z4 - Spare battery pack

R&S®FPL1-Z4

Order number 1323.1677.02

Description

Spare battery pack

R&S®FPL1-Z5

Order number 1323.1690.02

Description

Anti-glare film

FPL1-Z6 - Rack mount kit

R&S®FPL1-Z6

Order number 1323.1954.02

Description

Rack mount kit

HE400UWB UWB antenna module

R&S®HE400UWB

Order number 4104.6900.02

Description

UWB antenna module, 30 MHz to 6 GHz

UWB antenna module, 30 MHz to 6 GHz (handle to be bought separately)

30 MHz to 6 GHz

Vídeos de aplicação

Easy to use and portable spectrum and signal analyzer
Analisador de sinal e espectro portátil e fácil de usar

O analisador de espectro R&S®FPL1000 da Rohde & Schwarz é compatível com muitas aplicações, tais como medições de potência e análise de sinais com modulação digital e analógica. O R&S®FPL1000 é portátil e fácil de usar e é ideal para as suas tarefas laborais diárias.

Analog demodulation using the R&S®FPL1000 spectrum analyzer
Demodulação analógica que utiliza o analisador de espectro R&S®FPL1000

O analisador de espectro R&S®FPL1000, equipado com a opção R&S®FPL1-K7, demodula sinais analógicos modulados AM, FM e PM. O R&S®FPL1-K7 é ideal para a resolução de problemas de transmissores AM e FM, para medições de estabilização e transiente de osciladores e para análise de chilro simples de sinais de onda pulsados ou contínuos.

Noise figure and gain measurement using the R&S®FPL1000 spectrum analyzer
Medição de ganho e figura de ruído utilizando o analisador de espectro R&S®FPL1000

O analisador de espectro R&S®FPL1000 equipado com a opção R&S®FPL1-K30 mede a figura de ruído e o ganho de componentes, como amplificadores de ruído baixo (LNAs). Utilizando o método do fator Y, a figura de ruído e o ganho são medidos com alta precisão.

Digital demodulation of a Bluetooth LE signal using the R&S®FPL1000 spectrum analyzer
Demodulação digital de um sinal de Bluetooth LE utilizando o analisador de espectro R&S®FPL1000

O analisador de espectro R&S®FPL1000, juntamente com o software explorador de sinal vetorial R&S®VSE e a opção R&S®VSE-K70, permite uma análise detalhada de sinais com modulação digital vetorial. Neste vídeo, demonstramos uma análise detalhada de um sinal de Bluetooth LE que inclui erro de frequência e qualidade da modulação.

Peça informações

Falta alguma pergunta? Você precisa de informações adicionais? Basta usar este formulário e nós imediatamente voltaremos para você.

Licença de marketing

Quero receber informações da Rohde & Schwarz por

O que isso significa?

Concordo que a ROHDE & SCHWARZ GmbH & Co. KG e a entidade ou subsidiária ROHDE & SCHWARZ que figuram na Informação Legal deste site podem entrar em contato comigo por meio do canal escolhido (e-mail ou correio) para fins de marketing e publicidade (por exemplo, informações sobre ofertas especiais e promoções de descontos) relacionados, mas não limitados, a produtos e soluções para teste e medição, comunicações seguras, monitoramento e testes de redes, broadcast e mídia, e segurança cibernética.

Seus direitos

Esta declaração de consentimento pode ser retirada a qualquer momento, enviando um e-mail com o assunto "Cancelar subscrição" para news@rohde-schwarz.com. Além disso, cada e-mail enviado tem um link para cancelar a subscrição de futuros anúncios por e-mail. Mais detalhes sobre a utilização de dados pessoais e o procedimento de rescisão estão definidos na “Declaração de privacidade”.

Obrigado.

Sua equipe Rohde & Schwarz

Ocorreu um erro. Tente novamente mais tarde.
Informações gerais e legais