3047 Результаты
Los amplificadores de banda ancha R&S®BBA300 son una nueva generación de amplificadores compactos de banda ancha de estado sólido diseñados para ofrecer alta disponibilidad. Presentan bandas de frecuencias extremadamente anchas y continuas que se extienden en el rango superior de las microondas con alta linealidad, sobresaliente densidad de potencia de ruido, una baja cifra de ruido y excelentes características armónicas. También cuentan con configuraciones de sistema y ajustes operacionales de alta flexibilidad.
Thanks to their high accuracy and fast load recovery time, the R&S®NGM200 power supplies are perfect for challenging applications. Their two-quadrant architecture allows them to function both as a source and a sink to simulate batteries and loads. Their short recovery times enable them to handle fast load changes, such as when mobile communications devices switch from sleep mode to transmit mode. High speed data acquisition and convenient battery simulation widen the range of applications.
Thailand’s NBTC relies on R&S ARGUS spectrum monitoring system - Reference Card
R&S BSCC2.0 Broadcast Service and Control Center - Product Brochure
At CERN, the European Organization for Nuclear Research, physicists and engineers probe the fundamental structure of the universe. CERN’s flagship, the Large Hadron Collider (LHC), has a massive underground infrastructure that consists of a 27-kilometer ring of superconducting magnets at an average depth of 100 meters. A mobile network designed for CERN’s needs, with a mix of above-ground and underground infrastructure, ensures area-wide communications.
Las fuentes de alimentación R&S®NGC100 de uno, dos o tres canales son ideales para el uso en laboratorios de desarrollo y en entornos industriales, ya que ofrecen una amplia gama de funciones y excelentes especificaciones técnicas. Gracias a su alta eficiencia energética, la fuente de alimentación permanece fría y en silencio, aún con máxima carga. Los prácticos conectores e interfaces brindan al usuario una gran agilidad y comodidad en el trabajo con la serie R&S®NGC100, incluso en racks de 19".
El R&S®QPS es un escáner de seguridad de ondas milimétricas de última vanguardia que detecta la presencia de objetos en el cuerpo o en la ropa que pueden ser peligrosos. Se utiliza en controles de seguridad de aeropuertos, para la protección de la propiedad, en eventos públicos con un alto potencial de amenazas, así como en controles de acceso a instalaciones que requieren mayor seguridad.
EMI Measurement Application for Signal and Spectrum Analyzers - R&S®FSW-K54, R&S®FSV3-K54, R&S®FPL1-K54, R&S®FSV-K54 - Specifications
The most important features for accurate and uncomplicated power measurements are top measurement accuracy and speed as well as simple operation on a base unit or a laptop/PC. The R&S®NRP power meter family combines all these characteristics in the R&S®NRX base unit, R&S®NRPV virtual power meter PC software and a comprehensive portfolio of LAN and USB power sensors. The R&S®NRP family is ideal for use in production, R&D and calibration labs as well as for installation and maintenance tasks.
R&S TMU9 / TMV9 Air-Cooled Transmitter Families - Product Brochure
The R&S®FSC is a compact, cost-efficient solution that offers all essential features of a professional spectrum analyzer with Rohde & Schwarz quality. The R&S®FSC covers a wide range of applications from simple development tasks to production and can be used to train RF professionals. It is also ideal for service or maintenance applications. The R&S®FSC has many functions for simplifying and speeding up the RF product development and testing. The good RF characteristics and high measurement accuracy ensure reliable and reproducible measurement results.
R&S QAR50 Automotive Radome Tester - Product Brochure
VHF/UHF Automatic Filters and Multicouplers for R&S M3SR software defined radios - Product Brochure
GX470 Digital Wideband Storage Device - Product Brochure
All wireless devices must be tested for radiated spurious emissions (RSE) to verify compliance with national and international standards such as ITU, ETSI and FCC. The configuration required is similar to an EMI measurement setup, with the additional challenging task of measuring the low level spurious emissions in presence of the carrier frequency of a wireless device. The R&S®TS8996 RSE test system handles these tasks with a single setup and covers all relevant carrier frequencies and bandwidths used in wireless communications.
Mobile network testing (MNT) and cellular network analysis (CNA) have many use cases that overlap but require different antennas. Together with our R&S®TSMx mobile network scanners, Rohde & Schwarz has several antennas for all types of measurement campaigns. Typical network scanner applications include coverage and signal quality measurements for network verification, optimization, troubleshooting and benchmarking. Network scanners are also used for MIMO, network synchronization, interference and drone based RF measurements.
This document provides the technical specifications of the R&S®Fxx-K30 noise figure measurement application.
The R&S®ESW is a high-performance EMI test receiver for compliance testing. With its outstanding RF characteristics, high dynamic range and measurement accuracy, the R&S®ESW is ideal for fast and reliable certification measurements. It meets the most stringent requirements in line with CISPR, EN, MIL‑STD-461, DO‑160 and FCC. The FFT based time domain scan in the R&S®ESW captures and weights disturbance spectra with the shortest testing times and maximum insight. Real-time spectrum analysis enables detailed investigations of even the shortest disturbance signals.
R&S FSW-B512R-B800R-K161R-K512RE-K800R Real-Time Spectrum Analyzer and Measurement Application - Specifications
R&S®VSE-K60(x) / FSW-K60(x) / FSWP-K60(x) / FSV3-K60(x) Transient measurements - Specifications
The specifications of the R&S®FSx-K91/p/n/ac/ax/be, R&S®FPS-K91/p/n/ac and R&S®VSE-K91/p/n/ac/ax/be WLAN measurement applications are based on the data sheet specifications of the R&S®FSW, R&S®FSVA3000, R&S®FSV3000 and R&S®FPS signal and spectrum analyzers.
R&S®THU9evo | R&S®THV9evo Liquid-Cooled Transmitter Family - Product Brochure
Redefining the future of mobile delivery – 5G broadcast/multicast R&S®Tx9/R&S®Tx9evo - Product Flyer
R&S®NESTOR is a Windows based software for analyzing cellular networks over the air interface. It is widely deployed by law enforcement agencies, intelligence services, armed forces and regulatory authorities. R&S®NESTOR is used with Rohde & Schwarz mobile network scanners and QualiPoc smartphones, which offer the most advanced technology worldwide. The software supports all of the applications that public authorities and security organizations need to gather information about cellular networks. R&S®NESTOR is used in vehicles, trains, aircraft, drones, on ships and on foot.
The R&S®FSWP phase noise analyzer and VCO tester features very high sensitivity thanks to extremely low noise internal sources and cross-correlation. It can measure phase noise on highly stable sources such as those found in radar applications in just seconds. Additional options such as pulsed signal measurements, residual phase noise characterization and integrated high‑end signal and spectrum analysis make the R&S®FSWP a unique test instrument. A multitouch display ensures straightforward and intuitive operation. The embedded SCPI recorder enables easy creation of executable scripts.
R&S®PWC200 Plane Wave Converter - Product Brochure
Digital workflows at Cineteca Nacional with Rohde & Schwarz products - Flyer
R&S®M3AR Software Defined Radios VHF/UHF Transceiver Family for Airborne Communications - Product Brochure