Le R&S®BBA300 est un amplificateur ultra large bande compact et robuste pour une utilisation dans des environnements de test sensibles tels que CEM, validation de produit et coexistence sans fil dans la gamme de fréquence de 380 MHz à 18 GHz et de puissance de sortie RF jusqu'à 300 W P1dB.

Rohde & Schwarz passive probes are all rounders in the probe world. They are a low-cost, general purpose solution for a broad range of applications. Learn more.

Network analyzer waveguide calibration kits, up to 1100 GHz, models with sliding match.

R&S®MXO 5 SERIES OSCILLOSCOPE Next generation oscilloscope: evolved for more challenges

SÉRIE D'OSCILLOSCOPES R&S®MXO 5C Prochaine génération d'oscilloscope dans un format compact

PC-offline software for R&S MXO series oscilloscope

R&S®MXO 3 SERIES OSCILLOSCOPE Next generation oscilloscope: Fast. Precise. Compact.

mmWave receiver module, with a harmonic mixer, is a booster amplifier for controlled input power and a low noise amplifier for the IF signal.

mmWave receiver modules for antenna test systems with the highest dynamic range.

mmWave transceiver modules for antenna test systems with the highest dynamic range.

The R&S®ZCxxx mmWave converters allow mmWave measurements in the frequency range up to 1.1 THz.

The R&S®ZCDSxxx mmWave dual-source converters allow mmWave intermodulation measurements in the frequency range up to 170 GHz.

The new R&S®SZM family of frequency multipliers combine easy handling and precise output levels in the frequency range from 50 GHz to 170 GHz.

R&S®ZVA-Zxxx millimeterwave converters have a wide dynamic range. Rohde & Schwarz converters are very convenient to operate and enable fast measurements.

The R&S®ZN‑ZCG comb generator helps with the precise phase calibration of R&S®ZNA VNAs to support phase and delay measurements with LO access.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

Noise figure measurement with vector network analyzers

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

R&S®ZVH handheld cable & antenna analyzer increases efficiency in the field. Frequency range from 100 kHz to 3.6 GHz / 8 GHz.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 port and 4 port models available. ZN-Z51 has configurable test ports.

ZN-Z3x: Automatic recalibration without reconnecting calibration equipment. Supports TVAC, multiport and production systems. CAN bus network control. Up to 40 GHz.

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.