Centre de téléchargement

Describes all instrument functions and remote control commands, as well as measurement and programming examples.

English - 29 juil. 2026

Provides the basic information required for remote control connections via SCPI.

English - 16 juil. 2025

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

English - 24 déc. 2017

French - 31 juil. 2024

French - 29 avr. 2026

With continuously increasing data rates, signal integrity in high speed digital designs becomes more and more demanding

English - 8 juil. 2022

English - 14 juil. 2022

The R&S®ZNA vector network analyzer with integrated LO output and direct IF input options is a simple, cost-effective solution for 2-port and 4-port measurements using Rohde & Schwarz mmWave converters.

English - 19 juil. 2021

Describes the health and utilization monitoring service (HUMS).

English - 5 sept. 2025

English - 29 avr. 2026

Provides the information required to prepare the instrument for use and start working.

English - 29 juil. 2026

PAM-4 (4-level pulse amplitude modulation) has been introduced in high-speed serial data technology to reduce the bandwidth demands of ultra-high data rates. It uses only half the bandwidth per bit that would be required of conventional NRZ (non-return to zero) modulation. But at the same time, PAM-4 signaling complicates design and test at every turn. Evaluation of channels is now just as important to system development as serializer / deserializer (SerDes) testing and the challenges presented require a higher level of test and measurement performance than ever before. This paper investigates the evaluation complexities of PAM-4 interconnects at high data rates.

English - 22 oct. 2020

This application note describes Methods of Implementations (MOI) for precise, fast and error-free compliance testing of high-speed backplanes and direct attach copper cables (DAC) according to IEEE 802.3bj, IEEE 802.3by, IEEE 802.3cd and IEEE 802.3ck, based on 25 Gb/s, 50 Gb/s and 100 Gb/s signaling per lane with vector network analyzers from Rohde & Schwarz.

English - 7 avr. 2021

RF system noise contributions define receiver capabilities and sensitivity. The noise figure measures how the critical components affect the signal.

English - 28 janv. 2022

A Fabry-Pérot open resonator (FPOR) provided by QWED allows dielectric sheets to be accurately characterized in the frequency range from 110 GHz to 170 GHz using just one fixture.

English - 14 janv. 2025