R&S®FE110SR Frontend

SUB-TERAHERTZ, ABOVE EXPECTATIONS

R&S®FE110SR Frontend
Lightbox öffnen
R&S®FE110SR Frontend
Lightbox öffnen
R&S®FE110SR Frontend
Lightbox öffnen
R&S®FE110SR Frontend
Lightbox öffnen
R&S®FE110SR Frontend
Lightbox öffnen
R&S®FE110SR Frontend
Lightbox öffnen
R&S®FE110SR Frontend, Front Low R&S®FE110SR Frontend, Back low R&S®FE110SR Frontend, Side view R&S®FE110SR Frontend, Side view R&S®FE110SR Frontend, Side view R&S®FE110SR Frontend, Side view

Hauptmerkmale

  • Fully calibrated solution
  • Ease of operation
  • Fully automated
  • Smart accessories
  • Compact form factor

Frequency extension to 110 GHz

The R&S®FE110SR is ideal for demanding applications up to 110 GHz. Once connected, the frequency range of the R&S®FSW signal and spectrum analyzer and the R&S®RTP  oscilloscope are extended to the W-Band frequency range (70 GHz to 110 GHz). The easy-to-use, fully-calibrated solution is compatible with our analyzer and oscilloscope environments. Plug it in and start designing and testing the next generation automotive radar or mobile communications today.

Merkmale & Vorteile

Fully calibrated solution

The R&S®FE110SR is designed as an external frontend for the R&S®FSW signal and spectrum analyzer and the R&S®RTP oscilloscope. Every R&S®FE110SR is fully characterized during production. As soon as the R&S®FE110SR is connected via LAN, the correction data stored in the frontend is automatically transferred to the base unit. This ensures a fully calibrated  solution. and reduces the time and equipment needed for setup and calibration while enhancing measurement fidelity.

Lightbox öffnen

R&S®FSW with connected frontend

Ease of operation

The R&S®FE110SR fits seamlessly into the operating concept of the R&S®FSW signal analyzer and R&S®RTP oscilloscope. Only three connections (LAN, IF and REF frequency) between frontend and base units are required. Setting up automated measurements is easy and reliable because multiple instruments do not need to be programmed. 

Lightbox öffnen

Excellent signal performance

Generating wideband-modulated signals with excellent modulation quality is essential when developing products for next generation automotive radar or mobile communication. The R&S®FE110SR has outstanding modulation quality. A  5G NR signal with a channel bandwidth of 2 GHz (960 kHz SCS) and QPSK modulation can be analyzed with an EVM better than -39 dB (at 88 GHz). This excellent modulation quality is maintained over a wide dynamic range. 

Lightbox öffnen

EVM values versus output power at different center frequencies

Smart accessories

External bandpass filters optimize spur performance and are available as options for the R&S®FE110ST and R&S®FE110SR. The R&S®FE110-Zxx waveguide bandpass filters have low insertion loss and an excellent voltage standing wave ratio. Device characteristics are stored on an EPROM. A cable connection provides data to the base instruments. This data is automatically considered by the base units for a fully calibrated solution.

Lightbox öffnen

FE110SR with connected bandpass filter FE110-Zxx

Compact form factor

The compact design allows the R&S®FE110ST to be positioned closely to the device under test. This minimizes the length of additional RF feed lines that can increase losses. Short distance to the DUT reduces the level ripple over frequency and improves signal quality. The R&S®ZZA-FE01 frontend height adjustement has adjustable feet and versatile mounting points which allow flexible positioning of the R&S®FE110ST in a chamber.  

Lightbox öffnen

Mounted frontend with R&S®ZZA-FE01 frontend height adjustement

Multichannel analysis

For multichannel test setups, connect up to four R&S®FExx modules to the R&S®RTP oscilloscope. Select between “Coupled LO” or “Coupled Ref” signal to sychronize the external Frontend modules. Perform your multichannel signal analysis based on the IQ data of the R&S®RTP-K11 IQ SW interface option or with dedicated analysis options of the R&S®VSE analysis software such as the R&S®VSE-K146 5G MIMO measurement option.

Lightbox öffnen

R&S®RTP oscilloscope with two R&S®FE110SR modules

Verfügbare Optionen

External accessories
Produkt
Beschreibung
R&S®FE110-Z10

Bestellnummer 1348.5230.02

Beschreibung

Bandpass filter

External bandpass filter (70-86 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z01

Bestellnummer 1348.5147.02

Beschreibung

Bandpass filter

External bandpass filter (75–90 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z02

Bestellnummer 1348.5153.02

Beschreibung

Bandpass filter

External bandpass filter (80–95 GHz) for the R&S®FE110ST and R&S®FE110SR 
 

R&S®FE110-Z03

Bestellnummer 1348.5160.02

Beschreibung

Bandpass filter

External bandpass filter (85–105 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z04

Bestellnummer 1348.5199.02

Beschreibung

Bandpass filter

External bandpass filter (94-110 GHz) for the R&S®FE110ST and R&S®FE110SR 
 

R&S®FE110-Z20

Bestellnummer 1348.5224.02

Beschreibung

WR10 waveguide-to-waveguide adapter

Waveguide section straight. Length: 40mm

R&S®WCA110

Bestellnummer 3626.1067.02

Beschreibung

Waveguide Coax Adapter, WR10 to 1 mm (f)

75 GHz to 110 GHz

R&S®WCA110

Bestellnummer 3626.1067.03

Beschreibung

Waveguide Coax Adapter, WR10 to 1 mm (m)

75 GHz to 110 GHz

R&S®SGH110G20

Bestellnummer 1537.3262.02

Beschreibung

Standard gain horn antenna

75 to 110 GHz, 20 dBi Connector waveguide WR10 

R&S®SGH110G25

Bestellnummer 1538.5852.03

Beschreibung

Standard gain horn antenna 

75 to 110 GHz, 25 dBi Connector waveguide WR10

Mechanical accessories
Produkt
Beschreibung
R&S®ZZA-FE01

Bestellnummer 1348.5330.02

Beschreibung

Frontend height adjustment

Height adjustment and mounting kit for external frontends. 
Horizontal or vertical assembly possible.

Tools
Produkt
Beschreibung
R&S®ZCTW

Bestellnummer 1175.2014.02

Beschreibung

Torque wrench for waveguide flange screws

Related videos

Towards 6G: MIMO measurements up to 110 GHz

This video demonstrates signal transmission and analysis of a 2x2 MIMO signal at 90 GHz.

12.03.2024

Noise Figure and Gain Measurements of amplifiers from 75 GHz to 110 GHz

This video shows how to measure noise figure and gain of an amplifier at around 90 GHz using the smart noise source R&S FS-SNS110 and the external frontend R&S FE110SR in combination with a spectrum analyzer.

11.03.2024

Signal generation and analysis up to 110 GHz with frontends

This video shows the excellent signal performance and the support of swept measurements and local oscillator coupling of the FE frontend series.

11.03.2024

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing-Einverständniserklärung

Ihre Anfrage wurde erfolgreich versendet. Wir nehmen in Kürze Kontakt mit Ihnen auf.
An error is occurred, please try it again later.
Allgemeine Informationen und rechtliche Hinweise

Unverbindliche Preisempfehlung des Herstellers (UVP). Der dargestellte Preis versteht sich ohne USt. Preise und Angebote richten sich nur an Unternehmer und nicht an private Verbraucher.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Teilnahmebedingungen für das Gewinnspiel „10 Jahre Oszilloskope von Rohde & Schwarz“

1. Das Gewinnspiel „10 Jahre Oszilloskope von Rohde & Schwarz“ (nachfolgend „Gewinnspiel“ genannt) wird organisiert von der Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 München, Deutschland, Tel. +49 89 41 29 0 (nachfolgend „R&S“ genannt).

2. Teilnehmer können sich zwischen dem 1. Januar 2020 und dem 31. Dezember 2020 mit ihrem Namen, Firmennamen und ihrer geschäftlichen E-Mailadresse registrieren.

3. Die Teilnahme am Gewinnspiel ist kostenlos und nicht vom Erwerb einer Ware oder Dienstleistung abhängig.

4. Teilnahme- und gewinnberechtigt sind nur juristische Personen. Natürlichen Personen ist es nicht gestattet, in ihrem eigenen Namen und auf eigene Rechnung teilzunehmen. Sie dürfen das Teilnahmeformular lediglich in ihrer Eigenschaft als Vertreter einer juristischen Person und im Namen und Auftrag dieser juristischen Person einreichen.

5. Zu gewinnen gibt es innerhalb des Zeitraums vom 1. Januar 2020 bis zum 31. Dezember 2020 jeweils eines von zehn R&S®RTB2000 Oszilloskopen:

Preis: 1x R&S®RTB2000 Digitales Oszilloskop

6. Die Preisverlosung findet am Hauptsitz von Rohde & Schwarz, Mühldorfstraße 15, 81671 München, statt. Die Gewinner werden innerhalb von fünf (5) Werktagen per E-Mail benachrichtigt.

7. Der bevollmächtigte Vertreter der juristischen Person hat die Inanspruchnahme des Gewinns gegenüber R&S zu bestätigen. Bleibt diese Inanspruchnahme aus oder erfolgt keine Antwort innerhalb von zwei (2) Wochen, wird ein neuer Gewinner ermittelt. Wenn innerhalb von vier (4) Wochen kein Gewinner feststeht, endet die Verlosung und der Preis verfällt.

8. Mitarbeiter von R&S und an der Konzeption und Umsetzung des Gewinnspiels beteiligte Personen sowie ihre Familienmitglieder sind nicht berechtigt, das Teilnahmeformular auszufüllen.

9. Eine Barauszahlung oder ein Umtausch von Preisen ist ausgeschlossen. Preise sind nicht übertragbar. Alle Steuern, Abgaben, Zölle, Gebühren und sonstigen Entgelte, die im Land des Teilnehmers erhoben werden, sind vom Teilnehmer zu tragen.

10. Personenbezogenen Daten werden ausschließlich für die Durchführung des Gewinnspiels verwendet und innerhalb von vier (4) Wochen nach Ende des Gewinnspiels gelöscht, sofern nichts anderes vereinbart wurde.

11. Ein Verstoß gegen diese Teilnahmebedingungen berechtigt R&S, den jeweiligen Teilnehmer von der Teilnahme auszuschließen. Handelt es sich bei dem ausgeschlossenen Teilnehmer um einen bereits ausgelosten Gewinner, kann der Gewinn nachträglich aberkannt werden. Wird ein Preis aufgrund eines Verstoßes gegen diese Teilnahmebedingungen nachträglich aberkannt, ist er von dem jeweiligen Teilnehmer auf dessen Kosten an die oben unter Punkt 1 angegebene Anschrift von R&S zurückzusenden, und es wird ein neuer Gewinner ermittelt.

12. Teilnehmer haben keinen Gewinnanspruch. Der Rechtsweg ist ausgeschlossen.

13. Das Gewinnspiel und jedes daraus zwischen R&S und dem jeweiligen Teilnehmer entstehende Vertragsverhältnis unterliegt deutschem Recht und gilt unter Ausschluss kollisionsrechtlicher Regelungen. Für alle Streitigkeiten, die sich mittelbar oder unmittelbar aus der Teilnahme an diesem Gewinnspiel ergeben, wird München als ausschließlicher Gerichtsstand vereinbart.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.