100BASE-T1/BroadR-Reach® Ethernet

Compliance test

Oscilloscope-Software-RTx-K24-BroadR-Reach-Compliance-Test-RTO-K24
Abrir Lightbox
Oscilloscope-Software-RTx-K24-BroadR-Reach-Compliance-Test-RTO-K24
Abrir Lightbox
Oscilloscope-Software-RTx-K24-BroadR-Reach-Compliance-Test-RTO-K24 Oscilloscope-Software-RTx-K24-BroadR-Reach-Compliance-Test-RTO-K24

Key facts

  • Test solution of BroadR-Reach® Ethernet interfaces
  • Predefined, automated test steps
  • Step-by-step wizard for user guidance
  • Clear and comprehensive test documentation
  • Test report documentsresults including numerical data or screen shots
  • R&S oscilloscopes | Engineered for multi-domain challenges
  •  R&S oscilloscopes | High definition mode | See more with up to 16-bit resolution

Oscilloscope software

The R&S®RTP-K24 and R&S®RTO-K24 option offers an automated test solution for BroadR-Reach® Etherne according to openSIG compliance test specification. The test wizard guides the user via illustrated step-by-step instructions. Automatic test sequences allow for a fast test run. A configurable test report documents the test results. The complete Ethernet compliance test solution includes the R&S®RT-ZF2 Test Fixture.

Características y ventajas

Includes all relevant tests

All relevant test cases covered

The complete test solution covers all relevant test cases of the openSIG compliance test specification for BroadR-Reach® Etherne interfaces. A test fixture guarantees accurate signal probing via differential probes and completes the scope of the test solution.

BroadR-Reach® Compliance Test
Open Lightbox

Fully automatic or manual tests

The R&S®ScopeSuite has a test wizard for guided steps. The tests used are fully automatic. In addition, single tests can be carried out for efficient debugging. The limit editor lets you individually adjust standard-specific test limits.

BroadR-Reach® Compliance Test
Open Lightbox

Guided test steps

Ease-of-use with image-based guided test steps

The Ethernet compliance test is a fully guided test. Detailed, image-based instructions make it easy to correctly connect the oscilloscope and the probes to the test fixture and the device under test. This increases the ease-of-use and reduces potential setup errors.

100BASE-T1 - BroadR-Reach® Ethernet
Open Lightbox

Strong reporting functionality

Clear and comprehensive reporting functionality

The test results are fully documented in a report created by the R&S®ScopeSuite. Depending on the user’s preference, the test report can include numerical result data or oscilloscope screen shots. The available output formats are PDF, DOC and HTML.

 

BroadR-Reach® Compliance Test
Open Lightbox

Complete solution

Test solution includes oscilloscope, VNA, Waveform generator and test fixtures

The compliance test setup includes test cases that need a waveform generator and a network analyzer. R&S offers a complete solution with the R&S®RTO-B6 waveform generator and the R&S®ZND Vector Network Analyzer. The R&S®ScopeSuite compliance test software fully supports all instruments for a fully integrated compliance test solution.

BroadR-Reach® Compliance Test
Open Lightbox

High Definition Mode

High Definition Mode for higher test yield

With the optional High Definition mode, the vertical resolution of the oscilloscope is increased to up to 16 bit. The compliance test results will be more accurate. As a result the test yield is increased.

BroadR-Reach® Compliance Test
Open Lightbox

Available models


  • Option Name

    R&S®RTO-K24

    Order number 1329.7483.02

    Complete Test solution
    Automatic tests
    Manual tests
    Guided steps
    Report as pdf and rtf
    HD mode support
    Base unit
  • Option Name

    R&S®RTP-K24

    Order number 1800.6531.02

    Complete Test solution
    Automatic tests
    Manual tests
    Guided steps
    Report as pdf and rtf
    HD mode support
    Base unit

Available Options

Software options
Product Description
RTO-K17 High Definition

R&S®RTO-K17

Order number 1329.7419.02

Description

High definition mode

RTP-K17 High Definition

R&S®RTP-K17

Order number 1337.8856.02

Description

High definition mode

Extras
Product Description
RT-ZF2 Ethernet Test Fixture

R&S®RT-ZF2

Order number 1317.5522.02

Description

Test fixture set for 10M/100M/1G/10G-Base-T ethernet compliance test

Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet. Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.

RT-ZF3 Frequency Converter

R&S®RT-ZF3

Order number 5025.0670.02

Description

Frequency converter

for 100BASE-T1/BroadR-Reach compliance test

R&S®RTO-B4

Order number 1304.8305.02

Description

OCXO 10 MHz

Increase time base accuracy to ±0.02 ppm after calibration

RTO-B6 Arbitrary Waveform Generator

R&S®RTO-B6

Order number 1329.7054.02

Description

Arbitrary waveform generator

Add 2-channel 500 MSample/s waveform generator and 8-channel pattern generator

R&S®ZND-K5

Order number 1328.5312.02

Description

Full Test Set, Base Unit, bidirectional,  4.5GHz

RT-ZD30 Active differential probe

R&S®RT-ZD30

Order number 1410.4609.02

Description

Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface

More information

100Base-T1 compliance testing

100Base-T1 compliance testing

Guideline for 100Base-T1 compliance testing using the R&S®RTO and R&S®ZND.

More details

Webinar: Automotive Ethernet compliance testing

Webinar: Automotive ethernet compliance testing

This webinar presents details on the individual test cases of the compliance test and provides useful information on the required test setup.

More details

Gama de osciloscopios

Osciloscopios

Osciloscopios a la medida de sus necesidades y su presupuesto, desde modelos de alta gama hasta equipos de alto rendimiento

Más información

Opciones de software para osciloscopios

Amplíe las características de su osciloscopio con el software de aplicación de Rohde & Schwarz.

Más información

Sondas para osciloscopio

Configure su osciloscopio a la medida de sus necesidades con sondas y accesorios adecuados para su aplicación.

Más información

Solicitar información

Você tem alguma pergunta ou precisa de mais informações? Simplesmente preencha este formulário e nos comunicaremos com você imediatamente.

Permiso de marketing

Deseo recibir información de Rohde & Schwarz por

¿Qué significa esto exactamente?

Estoy de acuerdo con que ROHDE & SCHWARZ GmbH & Co. KG y la entidad o subsidiaria ROHDE & SCHWARZ que figure en la Declaración de confidencialidad del sitio web se ponga en contacto conmigo a través del canal elegido (correo electrónico o correo postal) para fines de marketing y publicitarios (p. ej., información sobre ofertas especiales y promociones de descuentos) en relación con, pero sin limitarse a, productos y soluciones para test y medida, seguridad en las comunicaciones, monitorización y medidas de redes, broadcast y multimedia así como ciberseguridad.

Sus derechos

Esta declaración de consentimiento se puede retirar en cualquier momento enviando un correo electrónico a news@rohde-schwarz.com con el asunto «Cancelar mi suscripción». Además, en cada correo electrónico enviado se incluye un enlace para cancelar por correo electrónico la suscripción a futuros anuncios. En la Declaración de privacidad encontrará información adicional sobre el uso de los datos personales y el procedimiento de retirada.

Gracias.

Su equipo de Rohde & Schwarz

Se ha producido un error. Inténtelo de nuevo más tarde.
Información general y jurídica

Precio de venta sugerido por el fabricante. Este precio no incluye el IVA. Precios y ofertas están destinados exclusivamente para empresarios y no para el consumidor final.