R&S®RTO6 oscilloscope

Instant insight meets in-depth information

Key Facts

6 GHz maximum bandwidth
1 million waveforms per second
9.4 ENOB for ultimate signal integrity
2 Gpoints maximum memory
Exclusive frequency zone trigger

A partir de 22.900 EUR

Solicitar presupuesto Configure your product

The oscilloscope you can trust

The R&S®RTO6 is the oscilloscope you can trust. Engineered to deliver reliable results, it acts as a sophisticated laboratory companion to solve measurement problems fast and keep you on schedule. The R&S®RTO6 oscilloscope series leverages the engineer’s expertise and builds your measurement confidence by achieving deep insights, whenever needed.

The R&S®RTO6 oscilloscope series provides superior signals to insight for your applications. The large 15.6" touchscreen and a new GUI, combined with high waveform update rate, excellent signal fidelity, digital trigger and deep responsive memory serve as a fully integrated test solution for frequency, protocol and logic analysis. The R&S®RTO6 oscilloscope series’ rich measurement toolset combined with a streamlined user interface helps you quickly solve circuit issues from simple to complex.

Quick Links

Features & benefits

Finding signal anomalies quickly

... with an unparalleled update rate

1 000 000 waveforms/s
Available with active histograms, masks or cursor measurements
Quickly and reliably detect sporadic signal faults
Mask testing: Quick configuration and fast results

**Typical update rate (left) vs. 1 million waveforms/s (right)**

Capturing all signal details

... with excellent signal integrity

Low-noise frontends and minimized crosstalk
Flat frequency response
Excellent longterm stability
Outstanding A/D converter with ultra-wide SFDR

**Measured frequency response of the R&S®RTO6**

Seeing more

... with up to 16 bit resolution

16 bit resolution for measuring small signal amplitudes
High acquisition rate and full functionality
Full sample rate – No aliasing
User-selectable filtering: Reduced noise, increased ENOB

**Typical vertical resolution (left) vs. 16 bit resolution HD Mode (right)**

Finding complex signal details

... with advanced trigger capabilities

Patented digital trigger system
High trigger sensitivity at full bandwidth
Isolate smallest signal details
Zone trigger in time and frequency domain

**Trigger not possible (left) vs. straightforward triggering with digital trigger and HD Mode (right)**

Measuring more

... with deep and responsive memory

Maximized memory: 200 Mpoints standard
2 Gpoints optional
Segmented memory to capture distant trigger events
History mode to analyze previous trigger events
Search and navigation: find faults fast

**Single-shot versus segmented acquisition**

Available models

Specifications

Vertical system
Analog channels		4
Bandwidth (-3 dB)	R&S®RTO64 with R&S®RTO6-B90 option	600 MHz
(one bandwidth option mandatory)	R&S®RTO64 with R&S®RTO6-B91 option	1 GHz
	R&S®RTO64 with R&S®RTO6-B92 option	2 GHz
	R&S®RTO64 with R&S®RTO6-B93 option	3 GHz
	R&S®RTO64 with R&S®RTO6-B94 option	4 GHz
	R&S®RTO64 with R&S®RTO6-B96 option	on 2 channels: 6 GHz on 4 channels: 4 GHz
Rise time	R&S®RTO64 with R&S®RTO6-B90 option	635 ps
	R&S®RTO64 with R&S®RTO6-B91 option	375 ps
	R&S®RTO64 with R&S®RTO6-B92 option	210 ps
	R&S®RTO64 with R&S®RTO6-B93 option	145 ps
	R&S®RTO64 with R&S®RTO6-B94 option	110 ps
	R&S®RTO64 with R&S®RTO6-B96 option	77 ps
Vertical resolution		16-bit system architecture
Effective number of bits / ENOB (meas.)	at 50 Ω, 50 mV/div, 10 MHz input signal with 90 % full-scale 50 MHz 100 MHz 200 MHz 300 MHz 500 MHz 1 GHz 2 GHz 4 GHz 6 GHz	9.4 9.0 8.6 8.2 8.1 7.7 7.1 6 6
RMS noise floor	at 50 Ω, 1 mV/div, 10 MHz bandwidth filter	10 µV (meas.)
Input impedance		50 Ω ±1.5 % 1 MΩ ±1 % at 15 pF (meas.)
Input sensitivity	max. bandwidth in all ranges	50 Ω: 1 mV/div to 1 V/div 1 MΩ: 1 mV/div to 10 V/div
Acquisition system
Realtime sampling rate	R&S®RTO6-B90, R&S®RTO6-B91, R&S®RTO6-B92, R&S®RTO6-B93 options	max 10 Gsample/s on each channel
	R&S®RTO6-B94, R&S®RTO6-B96 options	max. 10 Gsample/s on 4 channels max. 20 Gsample/s on 2 channels
Acquisition memory	standard	200 Mpoints on 4 channels 400 Mpoints on 2 channels 800 Mpoints on 1 channel
	R&S®RTO6-B104 option	400 Mpoints on 4 channels 800 Mpoints on 2 channels 800 Mpoints on 1 channel
	R&S®RTO6-B110 option	1 Gpoint on 4 channels 2 Gpoints on 2 channels (restriction: 1 Gpoint on 2 channels when channel 1 and channel 2 or channel 3 and channel 4 are turned on) 2 Gpoints on 1 channel
Max. acquisition rate		1 000 000 waveforms/s
Decimation modes	any combination of decimation mode and waveform arithmetics on up to 3 waveforms per channel	sample, peak detect, high resolution, root mean square
Waveform arithmetics		off, envelope, average
Interpolation modes		linear, sin(x)/x, sample&hold
Deembedding (optional)		yes
Horizontal system
Timebase range		25 ps/div to 10,000 s/div
Timebase Accuracy	after delivery/calibration	±10 ppb
Trigger system
Standard Trigger types		edge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, zone trigger
Optional Trigger types		serial bus trigger
Trigger sensitivity	definition of trigger hysteresis	automatic or manually adjustable from 0 div to 5 div
Analysis and measurement
Automatic measurements		47
Cursor measurements		4
Waveform mathematics		advanced (formula editor)
Mask testing
Mask definition		advanced (user-configurable, hardware based)
Logic analyzer (MSO) functionality
Digital input channels		16
MSO Memory depth		200 Mpts per channel
MSO Bandwidth		400 MHz
MSO sampling rate		5 Gsample/s per channel
General data
Dimensions	W x H x D	450 mm × 315 mm × 204 mm (17.72 in × 12.40 in × 8.03 in)
Weight		10.7 kg (23.59 lb)
Interfaces		1 Gbps LAN, type A: 2 x USB 3.1, 2 x USB 2.0, type B: 1 x USB 3.1, GPIB (optional), HDMI and DisplayPort for external monitor, external trigger, trigger output
Display		15.6" capacitive touchscreen, resolution: 1920 x 1080 pixel (Full HD)
Operating system		Windows

Available options

R&S®RTO6 Mediacenter

03:04

ene. 31, 2022

Short Video: 1000BASE-T1 Automotive Ethernet Distortion with Disturber Test

07:25

Ensayos de conformidad de 1000BASE-T1 en Ethernet automotriz con el modo de ensayo 4

dic. 28, 2021

09:20

Test de interoperabilidad de 1000BASE-T1

dic. 22, 2021

Get an impression of the R&S®RTO6 user interface

2:39

La serie R&S®RTO6 incorpora una nueva interfaz de usuario que simplifica los flujos de trabajo

jul. 01, 2021

1:15

Presentación general del R&S®RTO6

jul. 01, 2021

Application videos