R&S®NPA power analyzer

R&S®NPA power analyzer
Abrir Lightbox
R&S®NPA power analyzer
Abrir Lightbox
R&S®NPA power analyzer
Abrir Lightbox
R&S®NPA power analyzer
Abrir Lightbox
R&S®NPA power analyzer
Abrir Lightbox
R&S®NPA power analyzer
Abrir Lightbox
R&S®NPA power analyzer
Abrir Lightbox
R&S®NPA power analyzer, front view R&S®NPA power analyzer, front high R&S®NPA power analyzer, side view R&S®NPA power analyzer, hero view R&S®NPA power analyzer, back low R&S®NPA power analyzer, front low R&S®NPA power analyzer, side view

Key Facts

  • Power measurement range: 50 µW to 12 kW
  • Frequency bandwidth: DC to 100 kHz
  • Sampling rate: 500 ksample/s
  • Supports three switchable crest factors
  • Latest Rohde & Schwarz design featuring in-device graphical analysis and compliance evaluation

A partir de 1.620 EUR

  • R&S®Essentials

All-in-one  

the compact class, that has it all

The R&S®NPA series of single phase power analyzers is a comprehensive range of compact testers meticulously designed for AC/DC load or standby current characterization with fundamental accuracy of 0.05% and low current measurement down to 5 milliamps. Unlike other competitors on the market, these analyzers:

  • Require no additional tools for graphical analysis and compliance testing.
  • Provide numerical displays of 26 critical parameters.
  • Feature an auto-range function to enhance testing efficiency.
  • Offer a fast display update rate of 100 milliseconds for short tact times.
  • Incorporate frequency and adaptive filter capabilities to eliminate unnecessary noise and ensure smooth and accurate results.
The R&S®NPA seamlessly integrates all essential and remote control functions necessary for electric device research and development, production lines and quality assurance testing.

Features & benefits

Compliance in-device testing

Evaluation functions according to IEC 62301, EN 50564, or EN 61000-3-2


 

All tests conducted with our compliance testers adhere strictly to the following standards:

  • IEC62301: standby power consumption
  • EN50564: standby power consumption
  • EN61000-3-2: harmonic currents for EMC, CE approval
A user-friendly step-by-step wizard helps throughout the measurement process by automatically configuring the necessary instrument parameters. This approach minimizes potential measurement errors and ensures quick access to results. No prior familiarity with the aforementioned standards is required. Upon completion of testing, the system generates verification reports, eliminating the need for an external PC

Typical test setup with R&S®NPA-Z1 socket adapter
Abrir Lightbox

Typical test setup with R&S®NPA-Z1 socket adapter

Inrush measurement

Graphical view over one waveform period

Utilize a graphical representation to depict occurrences such as fast switch-on operation. This approach simplifies comprehension and helps compare the switching on and the steady-state operations of a device. The system can continuously record 8192 samples with durations of 16 milliseconds to 67 seconds. After a trigger event (similar to a single-shot capture on an oscilloscope), voltage and/or current are graphically plotted.

Inrush view showing the switch-on operations
Abrir Lightbox

Inrush view showing the switch-on operations

Trend chart function

Graphical display versus time

This graphical mode can plot up to two measured variables against time, similar to the roll mode in oscilloscopes. Primarily used observing longer time periods, it can accommodate 40 seconds to 80 minutes of data on the display. Decide on the plotting variables and adjust the timebase, while the vertical trace scaling is done automatically. When operating, the numerical representations of maximum and minimum values are visible on the screen for enhanced analysis

Simultaneous display of voltage and current versus time
Abrir Lightbox

Simultaneous display of voltage and current versus time

Waveform function

Oscillograph waveform chart

This function helps create a graphical representation of voltage, current, and/or power across a single waveform period, similar to the display format on an oscilloscope. The period is automatically determined by the R&S®NPA power analyzer . An automatic hardware trigger initiates each acquisition and the waveform is continuously refreshed. Alongside waveform visualization, the R&S®NPA furnishes numerical outputs for RMS voltage, RMS current and power, with softkeys for selecting displayed or concealed traces

Simultaneous display of voltage, current and power for one period
Abrir Lightbox

Simultaneous display of voltage, current and power for one period

Harmonic analysis

Harmonics as bar chart or table view

Harmonic mode enables the computing of root mean square (RMS) values and phase angles for harmonics. The accompanying bar chart elegantly visualizes patterns for up to 50 voltage and/or current harmonics, while the tabular presentation has comprehensive insights into magnitude and phase values per harmonic. Users can also selectively display odd or even harmonics. The intuitive interface allows seamless navigation through the data, with cursors or a rotary knob so that users can focus on individual harmonics, highlighted in a distinctive yellow.

Harmonics visualized as bar chart
Abrir Lightbox

Harmonics visualized as bar chart

Energy consumption meter

Real-time integrator

The integrator function serves a special purpose in unstable power measurements. The function is designed to compute and present the cumulative DUT power or energy consumption across a designated time span in both the active and standby states. Users can flexibly select their preferred acquisition mode, choosing between manual, time-based or event-based options. All R&S®NPA models deliver results in various formats, including positive, negative, and total watt-hours, with continuous updates in real time.

Integrator mode selection
Abrir Lightbox

Integrator mode selection

Available models

Available models
Modelos
Description
Frequency range
Power measurement range
Measurement functions
A partir de

R&S®NPA101

Order Number 3657.0562.02

Description
Power meter
 
Frequency range
DC to 100 kHz
 
Power measurement range
50 µW - 12 kW
Measurement functions
Basic
A partir de
1.620 EUR

R&S®NPA501

Order Number 3657.0562.03

Description
Power analyzer
 
Frequency range
DC to 100 kHz
 
Power measurement range
50 µW - 12 kW
Measurement functions
Basic, advanced, graphical
A partir de
2.910 EUR

R&S®NPA701

Order Number 3657.0562.04

Description
Compliance tester
 
Frequency range
DC to 100 kHz

 
Power measurement range
50 µW - 12 kW
Measurement functions
Basic, advanced, graphical, in-device compliance evaluation
A partir de
3.470 EUR

R&S®NPA501-G

Order Number 3657.0562.05

Description
Power analyzer, inc. IEEE-488 (GPIB)

 
Frequency range
DC to 100 kHz
 
Power measurement range
50 µW - 12 kW
Measurement functions
Basic, advanced, graphical
A partir de
3.360 EUR

R&S®NPA701-G

Order Number 3657.0562.06

Description
Compliance tester, inc. IEEE-488 (GPIB)
 
Frequency range
DC to 100 kHz
 
Power measurement range
50 µW - 12 kW
Measurement functions
Basic, advanced, graphical, in-device compliance evaluation
A partir de
3.920 EUR
Specifications
Electrical specifications
Analog bandwidth DC to 100 kHz
Frequency accuracy 0.1 % of reading
Basic accuracy 0.05 % of reading
Sampling frequency 500 kHz
Input impedance 2 MΩ
Current measurement range  1 mA to 20 A 
Voltage measurement range  1 mV to 600 V 
Power measurement range  Depends on combination of voltage and current ranges  50 µW to 12 kW
Display and interfaces
Display resolution 5 digits, 10 updates/s
Remote control interfaces: standard All models USB-TMC, USB-CDC (virtual COM), LAN
Remote control interfaces: optional R&S®NPA501-G, R&S®NPA701-G IEEE-488 (GPIB)
Display 320 × 240 pixel (QVGA-color)
Special functions
Basic  All models active power, apparent power, reactive power, lambda power factor, phase shift, frequency, voltage (RMS and average), current (RMS and average), total harmonic distortion, energy, data logging
Graphical  R&S®NPA501(-G), R&S®NPA701(-G) trend chart mode, inrush mode, harmonics mode, waveform mode
Advanced  R&S®NPA501(-G), R&S®NPA701(-G) limit testing, input for external probe and shunt, analog input and output, digital input and output, minimum & maximum voltage, current and power
Compliance evaluation R&S®NPA701(-G) Standards: IEC62301, EN 50564, EN 61000-3-2
General data
Rated mains voltage and frequency range AC 100 V to 115 V/230 V at 50 Hz to 60 Hz
Rated power 35 W (meas.)
Operating temperature range +5 °C to +40 °C
Dimensions 222 mm × 97 mm × 291 mm
(8.74 in × 3.82 in × 11.5 in)
Weight approx. 3.25 kg (7.16 lb)

Available options

Socket adapter
Product
Descripción
R&S®NPA-Z1

Order Number 3657.8911.02

Descripción

Mains adapter, EU version

R&S®NPA-Z2

Order Number 3657.8911.03

Descripción

Mains adapter, UK version

R&S®NPA-Z3

Order Number 3657.8911.04

Descripción

Mains adapter, US version

R&S®NPA-Z4

Order Number 3657.8911.05

Descripción

Mains adapter, CHN/AUS version

Current probes
Product
Descripción
R&S®HZC50

Order Number 3622.4690.02

Descripción

AC/DC current probe, 30 A, 4 mm connectors

R&S®HZC51

Order Number 3622.4684.02

Descripción

AC/DC current probe, 1000 A, 4 mm connectors

Rackmount kit
Product
Descripción
R&S®HZC95

Order Number 5800.2054.02

Descripción

19" rack adapter, 2HU, for R&S®NGE100B/NGC100/NPA and R&S®HMC series

Related videos

Conformance assessment of standby power consumption

Experience seamless in-device testing with the R&S NPA701 through an intuitive, step-by-step user-friendly wizard.

abr 05, 2024

Basic and advanced power measurement functions

Elevate your testing standards with the R&S NPA family, where precision meets simplicity.

abr 05, 2024

Solicitar información

¿Tiene preguntas o necesita información adicional? Simplemente complete este formulario y nos pondremos en contacto con usted.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.