R&S®RTA4000 Oscilloscope

R&S®RTA4000 Oscilloscope
R&S®RTA4000 oscilloscope, front view
R&S®RTA4000 oscilloscope, front view
Abrir Lightbox
R&S®RTA4000 Oscilloscope
R&S®RTA4000 oscilloscope, front view
R&S®RTA4000 oscilloscope, front view
Abrir Lightbox
R&S®RTA4000 Oscilloscope
R&S®RTA4000 oscilloscope, side view
R&S®RTA4000 oscilloscope, side view
Abrir Lightbox
R&S®RTA4000 Oscilloscope
R&S®RTA4000 oscilloscope, hero view
R&S®RTA4000 oscilloscope, hero view
Abrir Lightbox
R&S®RTA4000 Oscilloscope
R&S®RTA4000 oscilloscope, application image
R&S®RTA4000 oscilloscope, application image
Abrir Lightbox
R&S®RTA4000 oscilloscope, front view R&S®RTA4000 oscilloscope, front view R&S®RTA4000 oscilloscope, side view R&S®RTA4000 oscilloscope, hero view R&S®RTA4000 oscilloscope, application image

Key Facts

  • Bandwidth: 200 MHz to 1 GHz
  • Sample rate: up to 5 Gsample/s
  • Memory depth: up to 1 Gsample
  • ADC resolution: 10-bit
  • Display: 10.1’’ capacitive touchscreen

A partir de 7.060 EUR

Configure y solicite un presupuesto

See more of your signal with the power of 10

Designed with top class signal integrity and responsive ultra-deep memory, the R&S®RTA4000 brings the power of 10 to a new level. The Rohde & Schwarz designed 10-bit ADC plus best-in-class noise and memory depth for sharp waveforms, more accurate measurements and confidence when faced with unexpected measurement challenges.

Quick Links

Features & benefits

Signal analysis: quick results

See small signal details in the presence of large signals

The R&S®RTA4000 has a customized Rohde & Schwarz 10-bit A/D converter and is a four-fold improvement over conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed. One example is the characterization of switched-mode power supplies. The voltage across the switching device must be determined during the on/off times within the same acquisition.

10-bit A/D converter
Abrir Lightbox

10-bit A/D converter

10-bit A/D converter uncovers even small signal details and ensures vertical resolution four times higher than traditional oscilloscopes.

10-bit A/D converter
10-bit A/D converter - 10-bit A/D converter uncovers even small signal details and ensures vertical resolution four times higher than traditional oscilloscopes.

Segmented memory

100 Mpoint standard and 200 Mpoint interleaved

The R&S®RTA4000 has top-class memory depth of 100 Mpoints per channel and 200 Mpoint in interleaved mode. This is ten times more than similar oscilloscopes in the same instrument class. Users can capture longer acquisition sequences even at high sampling rates for more analysis results, such as when examining transients in switched-mode power supplies.

100 Msample standard memory
Abrir Lightbox

100 Msample standard memory

Capture and analyze pulsed and burst signals over a long period with up to 200 Mpoint standard acquisition memory

100 Msample standard memory
100 Msample standard memory - Capture and analyze pulsed and burst signals over a long period with up to 200 Mpoint standard acquisition memory

Capture more time at full bandwidth

Segmented memory: 1000 Mpoint with history function

The R&S®RTA-K15 option with deep, segmented memory analyzes signal sequences over a long observation period. Protocol-based signals with communications gaps such as I²C or SPI can be captured over several seconds or minutes. The variable segment sizes enable optimal utilization of the 1000 Mpoint memory. In history mode, previous acquisitions in the maximum segmented memory depth of 1000 Mpoint can be used for further analysis.

1000 Mpoint segmented memory
Abrir Lightbox

1000 Mpoint segmented memory

Capture the longest time periods with top-class 1000 Mpoint memory

1000 Mpoint segmented memory
1000 Mpoint segmented memory - Capture the longest time periods with top-class 1000 Mpoint memory

Logic analysis with the MSO option

16 additional digital channels

The R&S®RTA-B1 option turns every R&S®RTA4000 into an intuitive MSO with 16 additional digital channels. The oscilloscope captures and analyzes signals from the analog and digital components of an embedded design - synchronized and time correlated to each other. The delay between A/D converter input and output can be conveniently determined with cursor measurements.

Four-bit DAC signal change.
Abrir Lightbox

Four-bit DAC signal change.

The R&S®RTA4000 captures and analyzes analog and digital signals that are synchronized and time-correlated with each other.

Four-bit DAC signal change.
Four-bit DAC signal change. - The R&S®RTA4000 captures and analyzes analog and digital signals that are synchronized and time-correlated with each other.

Waveform and pattern generator

Generate analog and digital stimuli

The R&S®RTA-B6 waveform and pattern generator for up to 50 Mbit/s can be used in educational settings and prototype hardware implementation. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Predefined patterns include. I2C, SPI, UART and CAN/LIN.

Waveform and pattern generator
Abrir Lightbox

Waveform and pattern generator

In addition to common sine, square/pulse, ramp and noise waveforms, it outputs user-defined waveforms and 4-bit signal patterns.

Waveform and pattern generator
Waveform and pattern generator - In addition to common sine, square/pulse, ramp and noise waveforms, it outputs user-defined waveforms and 4-bit signal patterns.

Digital voltmeter

Measure and display electrical potential

The R&S®RTA4000 features a 3-digit voltmeter (DVM) and 6-digit frequency counter on each channel for simultaneous measurements. Standard measurement functions include DC, AC+DC (RMS) and AC (RMS).

Digital voltmeter
Abrir Lightbox

Digital voltmeter

The 3-digit voltmeter measures and displays the electrical potential difference between two points in an electric circuit.

Digital voltmeter
Digital voltmeter - The 3-digit voltmeter measures and displays the electrical potential difference between two points in an electric circuit.

Frequency analysis mode

Difficult-to-find faults often result from the interaction between time and frequency signals. The R&S®RTA4000 FFT function is activated at the push of a button or by simply entering the center frequency and span. The high-performance FFT function in the R&S®RTA4000 oscilloscope can be used to analyze signals with up to 128k points. Other practical tools include cursor measurements and autoset in frequency domain.

FFT of a square wave
Abrir Lightbox

FFT of a square wave

The high-performance FFT functionality analyzes signals up to 128k points.

FFT of a square wave
FFT of a square wave - The high-performance FFT functionality analyzes signals up to 128k points.

Mask test mode

Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. Masks assess the quality and stability of a DUT based on statistical pass/fail evaluations. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation generates a pulse output at the AUX-OUT connector on the R&S®RTA4000. This pulse output can be used to trigger actions in the measurement setup.

Mask test with result statistics
Abrir Lightbox

Mask test with result statistics

The pass/fail evaluation assesses DUT quality and stability.

Mask test with result statistics
Mask test with result statistics - The pass/fail evaluation assesses DUT quality and stability.

The best choice for power

See power signal details with up to 10-bit resolution

Even the smallest details of a high dynamic signal are important to power measurements. RDS (on) verification for a MOSFET is one example. The high ADC resolution of R&S®RTA4000 oscilloscopes increases vertical resolution up to 10 bits. Previously unseen signal details are revealed and measurable. The RDS(on) example shows how the slope of the drain-to-source-voltage can be measured while the switch is closed.

Power analysis
Abrir Lightbox

Power analysis

Analyze input, output and transfer functions of switched-mode power supplies

Power analysis
Power analysis - Analyze input, output and transfer functions of switched-mode power supplies

Available models

Available models
Modelos
Bandwidth
Channels
Sample rate
Max. memory depth
Optional MSO
A partir de

R&S®RTA4004

Order Number 1335.7700P04

Bandwidth
200 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
200 Mpts
Optional MSO
16 digital channels
A partir de
7.060 EUR
Solicitar presupuesto

R&S®RTA4004 + RTA-B243

Order Number 1335.7700P34

Bandwidth
350 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
200 Mpts
Optional MSO
16 digital channels
A partir de
11.900 EUR
Solicitar presupuesto

R&S®RTA4004 + RTA-B245

Order Number 1335.7700P54

Bandwidth
500 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
200 Mpts
Optional MSO
16 digital channels
A partir de
15.800 EUR
Solicitar presupuesto

R&S®RTA4004 + RTA-B2410

Order Number 1335.7700P64

Bandwidth
1 GHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
200 Mpts
Optional MSO
16 digital channels
A partir de
18.600 EUR
Solicitar presupuesto
Specifications
Vertical system
Analog channels 4
Digital channels (opt.) 16
Bandwidth (-3 dB) R&S®RTA4004 (with R&S®RTA-B24x options) 200 MHz, 350 MHz, 500 MHz, 1 GHz
Rise time R&S®RTA4004 (with R&S®RTA-B24x options) 1.75 ns, 1 ns, 700 ps, 350 ps
Input impedance 50 Ω ± 1,5% (meas.), 1 MΩ ± 1 % (meas.) || 14 pF ± 1 pF (meas.)
Input sensitivity max. bandwidth in all range at 1 MΩ: 500 μV/div to 10 V/div
at 50 Ω: 500 μV/div to 1 V/div
ADC resolution 10 bit, up to 16 bit with high resolution decimation
DC gain accuracy offset and position = 0, maximum operating temperature change of ±5°C after self-alignment input sensitivity > 5 mV/div: ±1 % of full scale
input sensitivity ≤ 5 mV/div to ≥ 1 mV/div: ±1.5 % of full scale
input sensitivity < 1 mV/div: ±2.5 % of full scale
Acquisition system
Real-time sampling rate 2.5 Gsample/s; 5 Gsample/s, interleaved
Acquisition memory 100 Mpoint (200 Mpoint, interleaved);
1 Gsample segmented memory
Max. acquisition rate 64 000 waveforms/s
(2 000 000 in fast segmented memory mode)
Horizontal system
Timebase range selectable between 0.5 ns/div and 500 s/div
Accuracy (after delivery/calibration) ±0.5 ppm
Channel-to-channel skew < 200 ps (meas.)
Channel deskew ±500 ns
Trigger system
Standard trigger types edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus
Optional trigger types I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN, audio (I2S),ARINC 429, MIL-STD-1553
Trigger sensitivity with DC, AC, LF reject, noise reject 1 GHz, 500 MHz, 350 MHz > 2.2 mVpp input sensitivity + 1 div (nom.) (input sensitivity: [mV/div]) 200 MHz, 100 MHz > 1.5 mVpp input sensitivity + 0.8 div (nom.) (input sensitivity: [mV/div]) 20 MHz > 0.6 mVpp input sensitivity + 0.4 div (nom.) (input sensitivity: [mV/div]) with HF reject all input sensitivities 1 div (meas.)
Analysis and measurement functions
Automatic measurements 32
Cursor measurements 4
Waveform mathematics Five equations math-on-math functions (addition, subtraction, multiplication, division, square, square root, abs. value, reciprocal, inverse, common log,, natural log., derivative, integral, low pass, high pass, track unipolar + bipolar on period, frequency, pulse width, duty cycle)
Mask testing
Mask definition elementary (tolerance mask around the signal)
History and segmented memory
Number of segments up to 87 380
Protocol trigger and decode
Supported protocols I2C, SPI, UART/RS-232/RS-422/RS-485, CAN, LIN, I2S, MIL-STD-1553, ARINC429
Waveform generator
Resolution 14 bit
Sample rate 250 Mpoint/s
Amplitude high Z; 50 Ω 20 mV to 10 V (Vpp); 10 mV to 5 V (Vpp)
DC offset high Z; 50 Ω ±5 V; ±2.5 V
Arbitrary max. 10 Mpoint/s; 32k point
Logic analyzer (MSO) functionality
Digital input channels 16
MSO memory depth two logic probes: 100 Mpoint for every channel
one logic probe: 200 Mpoint for every channel
MSO Bandwidth 400 MHz (meas.)
MSO sampling rate 2.5 Gsample/s; 5 Gsample/s, interleaved
MSO input impedance 100 kΩ ± 2 % || ~4 pF (meas.) at probe tips
Parallel buses up to 4
General data
Dimensions W × H × D 390  mm × 220 mm × 152 mm
(15.4 in × 8.66 in × 5.98 in)
Weight 3.3 kg (7.3 lb)
Display 10.1" WXGA TFT color display (1280 × 800 pixel)
Interfaces USB host with MTP, USB device, LAN, powerful web server for remote display and operation
Operating system Embedded

Available options

General
Product
Descripción
R&S®RTA-B1

Order Number 1335.7823.02

Descripción

Mixed signal option: 400 MHz

Turns R&S®RTA4000 oscilloscopes into fast, precise and easy-to-use mixed signal oscilloscopes (MSO).

R&S®RTA-B6

Order Number 1335.7830.02

Descripción

Arbitrary waveform generator

Adds a 25 MHz signal generator and a 4-bit pattern generator to your R&S®RTA4000 oscilloscopes.

Bandwidth upgrade
Product
Descripción
R&S®RTA-B243

Order Number 1335.7846.02

Descripción

Bandwidth upgrade of the R&S®RTA4004 to 350 MHz bandwidth

R&S®RTA-B245

Order Number 1335.7852.02

Descripción

Bandwidth upgrade of the R&S®RTA4004 to 500 MHz bandwidth

R&S®RTA-B2410

Order Number 1335.7869.02

Descripción

Bandwidth upgrade of the R&S®RTA4004 to 1 GHz bandwidth

Serial triggering and decoding
Product
Descripción
R&S®RTA-K1

Order Number 1335.7681.02

Descripción

I²C/SPI serial triggering and decoding

Triggering and decoding of I²C and 2-wire, 3-wire or 4-wire SPI buses

R&S®RTA-K2

Order Number 1335.7698.02

Descripción

UART/RS-232/RS-422/RS-485 serial triggering and decoding

Triggering and decoding of UART based protocols and RS-232, RS-422 as well as RS-485 buses

R&S®RTA-K3

Order Number 1335.7717.02

Descripción

CAN/LIN serial triggering and decoding

Triggering and decoding of CAN and LIN interfaces

R&S®RTA-K5

Order Number 1335.7723.02

Descripción

I²S/LJ/RJ/TDM triggering and decoding

Triggering and decoding of I²S buses

R&S®RTA-K6

Order Number 1335.7730.02

Descripción

MIL-1553 serial triggering and decoding

Triggering and decoding of MIL-STD-1553 buses

R&S®RTA-K7

Order Number 1335.7746.02

Descripción

ARINC 429 serial triggering and decoding

Triggering and decoding of ARINC 429 buses

General analysis
Product
Descripción
R&S®RTA-K31

Order Number 1335.7769.02

Descripción

Power analysis

When analyzing power electronics, the input and output and the internal transfer function of the component have to be characterized. The power analysis option provides the necessary measurement functions, including inrush current, output spectrum and safe operating area (SOA).

R&S®RTA-K36

Order Number 1335.7975.02

Descripción

Frequency Response Analysis (Bode plot)

The R&S®RTA-K36 frequency response analysis (Bode plot) option lets you perform low-frequency response analysis on your oscilloscope easily and quickly. It characterizes the frequency response of a variety of electronic devices, including passive filters and amplifier circuits. For switch mode power supplies, it measures the control loop response and power supply rejection ratio.

R&S®RTA-K37

Order Number 1335.7981.02

Descripción

Spectrum analysis and spectrogram

The spectrum analysis option enhances the powerful FFT capability of R&S®RTA4000 oscilloscopes with spectrogram display.

General accessories
Product
Descripción
R&S®RTB-Z1

Order Number 1333.1728.02

Descripción

Front cover

Protects the front of the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000

R&S®RTB-Z3

Order Number 1333.1734.02

Descripción

Soft bag

Stores the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 oscilloscope and accessories

R&S®RTB-Z4

Order Number 1335.9290.02

Descripción

Transit case with wheels for R&S®RTB

R&S®RT-ZA19

Order Number 1335.7875.02

Descripción

Accessory case for probes and small parts for all Rohde and Schwarz oscilloscopes

R&S®RT-Z2T

Order Number 1338.0007.02

Descripción

Probe adapter

Enables Tek’s TekProbe-BNC level 2 probes to connect to Rohde & Schwarz probe interface

R&S®ZZA-RTB2K

Order Number 1333.1711.02

Descripción

19" rackmount adapter for R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 with 5HU

Passive probes
Product
Descripción
R&S®RT-ZP05S

Order Number 1333.2401.02

Descripción

Passive probe, 500 MHz, 10:1

R&S®RT-ZP10

Order Number 1409.7550.00

Descripción

Passive probe, 500 MHz, 10:1

R&S®RT-ZP1X

Order Number 1333.1370.02

Descripción

Passive probe, 38 MHz, 1:1

Active single-ended probes
Product
Descripción
R&S®RT-ZS10E

Order Number 1418.7007.02

Descripción

Active single-ended probe, 1 GHz, Rohde & Schwarz probe interface

R&S®RT-ZS10

Order Number 1410.4080.02

Descripción

Active single-ended probe, 1 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

R&S®RT-ZS20

Order Number 1410.3502.02

Descripción

Active single-ended probe, 1.5 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

Active differential probes
Product
Descripción
R&S®RT-ZD10

Order Number 1410.4715.02

Descripción

Active differential probe, 1 GHz, Rohde & Schwarz probe interface

R&S®RT-ZD20

Order Number 1410.4409.02

Descripción

Active differential probe, 1.5 GHz, Rohde & Schwarz probe interface

Power rail probes
Product
Descripción
R&S®RT-ZPR20

Order Number 1800.5006.02

Descripción

Power rail probe, 2 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

2.0 GHz, 1:1, 50 kΩ, R&S probe interface

High voltage probes
Product
Descripción
R&S®RT-ZH03

Order Number 1333.0873.02

Descripción

250 MHz passive high voltage probe

R&S®RT-ZH10

Order Number 1409.7720.02

Descripción

400 MHz passive high voltage probe

R&S®RT-ZH11

Order Number 1409.7737.02

Descripción

400 MHz passive high voltage probe

R&S®RT-ZHD07

Order Number 1800.2307.02

Descripción

200 MHz High voltage differential probe

R&S®RT-ZHD15

Order Number 1800.2107.02

Descripción

100 MHz High voltage differential probe

R&S®RT-ZHD16

Order Number 1800.2207.02

Descripción

200 MHz High voltage differential probe

R&S®RT-ZHD60

Order Number 1800.2007.02

Descripción

100 MHz High voltage differential probe

Current probes
Product
Descripción
R&S®RT-ZC02

Order Number 1333.0850.02

Descripción

AC/DC 20 kHz current probe

R&S®RT-ZC03

Order Number 1333.0844.02

Descripción

100 kHz current probe

R&S®RT-ZC05B

Order Number 1409.8204.02

Descripción

2 MHZ current probe

R&S®RT-ZC10

Order Number 1409.7750K02

Descripción

10 MHZ current probe

R&S®RT-ZC10B

Order Number 1409.8210.02

Descripción

10 MHZ Current probe

R&S®RT-ZC20

Order Number 1409.7766K02

Descripción

100 MHZ current probe

R&S®RT-ZC20B

Order Number 1409.8233.02

Descripción

100 MHZ current probe

R&S®RT-ZC30

Order Number 1409.7772K02

Descripción

120 MHz current probe

R&S®RT-ZC31

Order Number 1801.4932.02

Descripción

120 MHz current probe

EMC near field probes
Product
Descripción
R&S®HZ-15

Order Number 1147.2736.02

Descripción

E and H near-field probe set

Logic probes
Product
Descripción
R&S®RT-ZL04

Order Number 1333.0721.02

Descripción

400 MHz logic probe

Probe accessories
Product
Descripción
R&S®RT-ZA13

Order Number 1409.7789.02

Descripción

Power supply for probes

Power supply for R&S®RT-ZC10/20/30/31 probes, +/-12V DC, +/-2.5A

R&S®RT-ZA15

Order Number 1410.4744.02

Descripción

External attenuator

10:1, 2.0 GHz, 1.3 pF, 60 V DC, 42 V AC (peak) for R&S®RT-ZD20/30 probes. Included in R&S®RT-ZD10.

R&S®RT-ZF20

Order Number 1800.0004.02

Descripción

Power deskew fixture

Deskew fixture for voltage and current probes for power measurements; includes USB 2.0 cable for power supply

R&S®RT-ZAP

Order Number 1326.3641.02

Descripción

3D probe positioner

3D positionier with central tensioning knob for easy clamping and positioning of probes (span width: 200 mm, clamping range: 15 mm)

Application bundles
Product
Descripción
R&S®RTA-PK1

Order Number 1335.7775.02

Descripción

Application bundle (R&S®RTA-K1, -K2, -K3, -K5, -K6, -K7, -K31, -K36, -K37 and -B6)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTA-K1), UART/RS-232/RS-422/RS-485 (R&S®RTA-K2) and CAN/LIN (R&S®RTA-K3), I²S (R&S®RTA-K5), MIL-1553 (R&S®RTA-K6), ARINC429 (R&S®RTA-K7), spectrum analysis and spectrogram (R&S®RTA-K37), power analysis (R&S®RTA-K31), frequency response analysis (R&S®RTA-K36), arbitrary generator (R&S®RTA-B6) for R&S®RTA4000 models

R&S®RTA-PK1US*

Order Number 1335.7998.02

Descripción

Application bundle (R&S®RTA-K1, -K2, -K3, -K5, -K6, -K7, -K31, -K36, -K37 and -B6)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTA-K1), UART/RS-232/RS-422/RS-485 (R&S®RTA-K2) and CAN/LIN (R&S®RTA-K3), I²S (R&S®RTA-K5), MIL-1553 (R&S®RTA-K6), ARINC429 (R&S®RTA-K7), power analysis (R&S®RTA-K31), frequency response analysis (R&S®RTA-K36), spectrum analysis and spectrogram (R&S®RTA-K37), arbitrary generator (R&S®RTA-B6) for R&S®RTA4000 models * ONLY distributed in North America

R&S®RTA4000 - Centro multimedia

Vídeos del producto - RTA4000
R&S®RTA4000: Centro multimedia

Ver más

Vídeos de aplicación
Vídeos de aplicaciones de los osciloscopios – Centro multimedia

Ver más

Le puede interesar también

10 años de osciloscopios de Rohde & Schwarz

10 años de innovación con los osciloscopios de Rohde & Schwarz

Más información

Nociones básicas de los osciloscopios y las sondas

Nociones básicas de los osciloscopios y las sondas

Conozca los principios básicos del funcionamiento del osciloscopio, de las sondas, así como diversas aplicaciones relacionadas con el osciloscopio que le ayudarán a optimizar sus resultados de medida.
Promoción de osciloscopios

Promoción de osciloscopios

Elija la promoción de Rohde & Schwarz que mejor se adapte a sus necesidades y ahorre presupuesto

Más información

Webinars de Rohde & Schwarz

Página de webinars sobre osciloscopios para aplicaciones de diseño digital y electrónica de potencia

Más información

Solución para

Diseños y tests de tipo analógico/digital
Diseño y tests de componentes analógicos/digitales

Eche un vistazo a las soluciones de Rohde & Schwarz para tests de integridad de señal y de potencia, medida de pequeña señal y solución de problemas de interferencias electromagnéticas.

Más información

Medidas de electrónica de potencia
Medidas de electrónica de potencia

Deje que nuestras soluciones de test y medida le ayuden a crear productos de bajo consumo energético y gran fiabilidad.

Más información

Productos relacionados

R&S®RTM3000 Oscilloscope, Front view

R&S®RTM3000
R&S®Scope Rider Handheld Oscilloscope, Front view

R&S®Scope Rider
R&S®RTE1000 Oscilloscope, Front view

R&S®RTE1000
R&S®RTO2000 Oscilloscope, Front view

R&S®RTO2000

Solicitar información

¿Tiene preguntas o necesita información adicional? Simplemente complete este formulario y nos pondremos en contacto con usted.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.