R&S®RTB 2 Oscilloscope

R&S®RTB 2 Oscilloscope
Abrir Lightbox
R&S®RTB 2 Oscilloscope
Abrir Lightbox
R&S®RTB 2 Oscilloscope
Abrir Lightbox
R&S®RTB 2 Oscilloscope
Abrir Lightbox
R&S®RTB 2 Oscilloscope
Abrir Lightbox
R&S®RTB 2 Oscilloscope
Abrir Lightbox
R&S®RTB 2 Oscilloscope
Abrir Lightbox
R&S®RTB 2 Oscilloscope
Abrir Lightbox
R&S®RTB 2 oscilloscope, Front Low R&S®RTB 2 oscilloscope, Side view R&S®RTB 2 oscilloscope, Hero view R&S®RTB 2 oscilloscope, Back low R&S®RTB 2 oscilloscope, Front Low R&S®RTB 2 oscilloscope, Side view R&S®RTB 2 oscilloscope, Hero view R&S®RTB 2 oscilloscope

Key Facts

  • Bandwidth: 70 MHz to 300 MHz
  • Sample rate: up to 2.5 Gsample/s
  • Memory depth: up to 20 Msample
  • ADC resolution: 10 bit
  • Display: 10.1" capacitive touchscreen

A partir de 1.690 EUR

Power of ten for every task, everyday

The R&S®RTB 2 series oscilloscopes combine the power of ten with smart operating concepts, making them the ideal all-purpose tool for students, hobbyists, technicians and engineers. As a successor to the highly capable R&S®RTB2000, the R&S®RTB 2 series features a 10-bit ADC, 10 Msample memory, and a 10.1-inch touchscreen.

Additionally, the R&S®RTB 2 series includes an integrated arbitrary waveform generator history and segmented memory capabilities. Furthermore, all RTB 2 models are MSO-ready, allowing the use of up to 16 digital channels with the appropriate probes.

These oscilloscopes offer four times the vertical resolution of standard 8-bit ADCs while maintaining fast sampling rates at all times. With the largest display and highest resolution in their class, they provide extensive capabilities for university laboratories, troubleshooting embedded designs during development, and for production and service departments.

The R&S®RTB 2 series is the perfect solution for anyone needing precise and reliable measurements.

Features & benefits

Signal analysis: quick results

See small signal details in the presence of large signals

The R&S®RTB 2 features a customized Rohde & Schwarz engineered 10-bit A/D converter that delivers a fourfold improvement compared to conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed. One example is the characterization of switched-mode power supplies. The voltage across the switching device must be determined during the on/off times within the same acquisition.

10-bit A/D converter
Abrir Lightbox

10-bit A/D converter

The Rohde & Schwarz designed 10-bit A/D converter ensures the highest signal fidelity at the highest resolution.

Capture more time at full bandwidth

10 Msample standard and 20 Msample interleaved

The R&S®RTB 2 offers a class-leading memory depth: 10 Msample per channel are available, even 20 Msample in interleaved mode. This is 10 times more than similar oscilloscopes in the same instrument class. The user captures longer acquisition sequences even at high sampling rates, e.g. when analyzing transients of switched-mode power supplies, and thus benefits from more detailed analysis results.

10 Msample standard memory
Abrir Lightbox

10 Msample standard memory

Capture and analyze pulsed and burst signals over a long period with up to 20 Msample standard acquisition memory.

Segmented memory

160 Msample with history function

Every R&S®RTB 2 is equipped with a standard segmented memory functionality. Protocol-based signals with communications gaps such as I²C or SPI can be captured over several seconds or minutes. The variable segment size optimally utilizes the 160 Msample memory. In history mode, previous acquisitions in the maximum segmented memory depth of 160 Msample are available for further analysis.

160 Mpoint segmented memory
Abrir Lightbox

160 Mpoint segmented memory

Capture the longest time periods with class-leading 160 Msample memory.

Logic analysis with the MSO option

16 additional digital channels

Every R&S®RTB 2 is MSO ready, which allows the R&S®RTB2-B1 option to enable up to 16 additional digital channels. The oscilloscope captures and analyzes signals from analog and digital components of an embedded design – synchronously and time-correlated to each other. For example, the delay between A/D converter input and output can conveniently be determined with the cursor measurements.

Four-bit DAC signal change.
Abrir Lightbox

Four-bit DAC signal change.

The R&S®RTB 2 captures and analyzes analog and digital signals synchronously and in time-correlated to each other.

Waveform and pattern generator

Generate analog and digital stimuli

The R&S®RTB-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Predefined patterns including. I2C, SPI, UART and CAN/LIN can be used.

Waveform and pattern generator
Abrir Lightbox

Waveform and pattern generator

In addition to common sine, square/pulse, ramp and noise waveforms, it outputs user-defined waveforms and 4-bit signal patterns.

Digital voltmeter

Measure and display electrical potential

The R&S®RTB 2 features a 3-digit voltmeter (DVM) and 6-digit frequency counter on each channel for simultaneous measurements. Standard measurement functions include DC, AC+DC (RMS) and AC (RMS).

Digital voltmeter
Abrir Lightbox

Digital voltmeter

The 3-digit voltmeter measures and displays the electrical potential difference between two points in an electric circuit.

Frequency analysis mode

Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S®RTB 2 is activated at the push of a button and by simply entering the center frequency and span. Thanks to the R&S®RTB 2 oscilloscopes’ high-performance FFT functionality, signals can be analyzed with up to 128 kpoints. Other practical tools include cursor measurements and autoset in frequency domain.

Frequency analysis mode
Abrir Lightbox

Frequency analysis mode

The high-performance FFT functionality analyzes signals up to 128 kpoints.

Mask test mode

Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. By using statistical pass/fail evaluation, they assess quality and stability of a DUT. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation can generate a pulse output at the AUX-OUT connector on the R&S®RTB 2. This pulse output can be used to trigger actions in the measurement setup.

Mask test with result statistics
Abrir Lightbox

Mask test with result statistics

The pass/fail evaluation assesses DUT quality and stability.

Ready for the teaching lab

In the teaching lab, the R&S®RTB 2 oscilloscope is the perfect choice to teach students how to measure with an oscilloscope. It has an easy-to-use concept combined with state-of-the-art technology at an affordable price. The large 10.1" high-resolution screen shows every signal detail, and one instrument can be shared among several students. Reports can be efficiently created with the handy, flexible screen annotation tool.

Ready for the teaching lab
Abrir Lightbox

Ready for the teaching lab

Perfect instruments for everyday use at universities and colleges thanks to diverse functionality, rugged design and a small footprint.

Available models

Available models
Modelos
Bandwidth
Channels
Sample rate
Max. memory depth
Optional MSO
A partir de

R&S®RTB22

Order Number 1333.1005.02

Bandwidth
70 MHz
Channels
2
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
1.690 EUR

R&S®RTB24

Order Number 1333.1005.04

Bandwidth
70 MHz
Channels
4
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
2.590 EUR

R&S®RTB22-70

Order Number 1333.1005P40

Bandwidth
70 MHz
Channels
2
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
1.690 EUR

R&S®RTB22-100

Order Number 1333.1005P41

Bandwidth
100 MHz
Channels
2
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
2.140 EUR

R&S®RTB22-200

Order Number 1333.1005P42

Bandwidth
200 MHz
Channels
2
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
2.990 EUR

R&S®RTB22-300

Order Number 1333.1005P43

Bandwidth
300 MHz
Channels
2
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
4.290 EUR

R&S®RTB24-70

Order Number 1333.1005P50

Bandwidth
70 MHz
Channels
4
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
2.590 EUR

R&S®RTB24-100

Order Number 1333.1005P51

Bandwidth
100 MHz
Channels
4
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
3.090 EUR

R&S®RTB24-200

Order Number 1333.1005P52

Bandwidth
200 MHz
Channels
4
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
3.790 EUR

R&S®RTB24-300

Order Number 1333.1005P53

Bandwidth
300 MHz
Channels
4
Sample rate
2.5 Gsample/s
Max. memory depth
20 Mpts
Optional MSO
16 digital channels
A partir de
5.290 EUR
Specifications
Vertical system
Analog channels R&S®RTB 22; R&S®RTB 24 2; 4
Digital channels (opt.) 16
Bandwidth (-3 dB) R&S®RTB 22/24 (with R&S®RTB-B2x1, R&S®RTB-B2x2 and R&S®RTB-B2x3 options) 70 MHz, 100 MHz, 200 MHz, 300 MHz
Rise time R&S®RTB 22/24 (with R&S®RTB-B2x1, R&S®RTB-B2x2 and R&S®RTB-B2x3 options) 5 ns, 3.5 ns, 1.75 ns, 1.15 ns
Input impedance 1 MΩ ± 2% with 9 pF ± 2 pF (meas.)
Input sensitivity Max. bandwidth in all ranges 1 mV/div to 5 V/div
ADC resolution 10 bit, up to 16 bit with high resolution decimation
DC gain accuracy offset and position = 0, maximum operating temperature change of ±5°C after self-alignment input sensitivity > 5 mV/div: ± 1.5% of full scale
input sensitivity ≤ 5 mV/div: ± 2% of full scale
Acquisition system
Real-time sampling rate 1.25 Gsample/s; 2.5 Gsample/s, interleaved
Acquisition memory standard 10 Msample; 20 Msample, interleaved;
160 Msample segmented memory
Max. acquisition rate 50 000 waveforms/s
(300 000 in fast segmented memory mode)
Horizontal system
Timebase range selectable between 1 ns/div and 500 s/div
Accuracy (after delivery/calibration) ±2.5 ppm
Channel-to-channel skew max. 800 ps (meas.)
Channel deskew ±500 ns
Trigger system
Standard trigger types edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus
Optional trigger types I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN
Trigger sensitivity with DC, AC, LF reject input sensitivity > 5 mV/div: < 0.8 div (meas.);
2 mV/div ≤ input sensitivity < 5 mV/div: < 1.5 div (meas.);
input sensitivity < 2 mV/div: < 2 div (meas.)
with HF reject all input sensitivities < 1 div (meas.)
Analysis and measurement functions
Automatic measurements  32
Cursor measurements 4
Waveform mathematics  5 equations math on math (addition, subtraction, multiplication, division, square, square root, abs. value, reciprocal, inverse, common log., natural log., derivative, integral, low pass, track unipolar + bipolar on period, frequency, pulse width, duty cycle) 
Mask testing
Mask definition elementary (tolerance mask around the signal)
History and segmented memory
Number of segments up to 13 107
Protocol trigger and decode
Supported protocols I2C, SPI, UART/RS-232/ RS-422/RS-485, CAN, LIN
Waveform generator
Resolution 14-bit
Sample rate 250 Mpoint/s
Amplitude high-Z; 50 Ω 20 mV to 5 V (Vpp); 10 mV to 2.5 V (Vpp)
DC offset high-Z; 50 Ω ±2.5 V; ±1.25 V
Arbitrary sampling rate; memory depth max. 10 Msample/s; 16k point
Logic analyzer (MSO) functionality
Digital input channels 16
MSO memory depth 10 Msample for every channel
MSO Bandwidth 300 MHz (meas.)
MSO sampling rate 1.25 Gsample/s
MSO input impedance 100 kΩ ± 2 % || ~4 pF (meas.) at probe tips
Parallel buses up to 2
General data
Dimensions W × H × D 390  mm × 220 mm × 152 mm
(15.4 in × 8.66 in × 5.98 in)
Weight 2.5 kg (5.5 lb)
Display 10.1" WXGA TFT color display (1280 × 800 pixel)
Interfaces USB host with MTP, USB device, LAN, powerful web server for remote display and operation
Operating system Embedded

Available options

General
Product
Descripción
R&S®RTB2-B1

Order Number 1801.8421.02

Descripción

Mixed signal option for R&S®RTB 2 oscilloscope, 300 MHz

Enables up to 16 digital channels.

Passive probes
Product
Descripción

Order Number 1803.1001.02

Descripción

Passive probe, 300 MHz, 10:1

Order Number 1333.2401.02

Descripción

Passive probe, 500 MHz, 10:1

Order Number 1409.7550.00

Descripción

Passive probe, 500 MHz, 10:1

Order Number 1333.1370.02

Descripción

Passive probe, 38 MHz, 1:1

High voltage probes
Product
Descripción

Order Number 1333.0873.02

Descripción

250 MHz passive high voltage probe

Order Number 1409.7720.02

Descripción

400 MHz passive high voltage probe

Order Number 1409.7737.02

Descripción

400 MHz passive high voltage probe

Logic probes
Product
Descripción
R&S®RT-ZL03

Order Number 1333.0715.02

Descripción

300 MHz logic probe, 8 channels

Probe accessories
Product
Descripción

Order Number 1333.0850.02

Descripción

AC/DC 20 kHz current probe

Order Number 1333.0844.02

Descripción

100 kHz current probe

Order Number 1409.7750K02

Descripción

10 MHZ current probe

Order Number 1409.7766K02

Descripción

100 MHZ current probe

Order Number 1409.7772K02

Descripción

120 MHz current probe

Order Number 1801.4932.02

Descripción

120 MHz current probe

Order Number 1409.7789.02

Descripción

Power supply for probes

Power supply for R&S®RT-ZC10/20/30/31 probes, +/-12V DC, +/-2.5A

Application bundles
Product
Descripción
R&S®RTB2-PK1

Order Number 1801.8438.02

Descripción

Application bundle (R&S®RTB-K1, -K2, -K3 and -K36)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTB-K1), UART/RS-232/RS-422/RS-485 (R&S®RTB-K2), CAN/LIN (R&S®RTB-K3) and frequency response analysis (R&S®RTB-K36)

General
Product
Descripción
R&S®RTB-Z1

Order Number 1333.1728.02

Descripción

Front cover

Protects the front of the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000

R&S®RTB-Z4

Order Number 1335.9290.02

Descripción

Transit case with wheels for R&S®RTB

R&S®RTB-Z3

Order Number 1333.1734.02

Descripción

Soft bag

Stores the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 oscilloscope and accessories

R&S®ZZA-RTB2K

Order Number 1333.1711.02

Descripción

19" rackmount adapter for R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 with 5HU

Order Number 1335.7875.02

Descripción

Accessory case for probes and small parts for all Rohde and Schwarz oscilloscopes

Solicitar información

¿Tiene preguntas o necesita información adicional? Simplemente complete este formulario y nos pondremos en contacto con usted.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.