R&S®FSMR3000 measuring receiver

Reducing complexity in calibration

R&S®FSMR3000 measuring receiver
Abrir Lightbox
R&S®FSMR3000 measuring receiver
Abrir Lightbox
R&S®FSMR3000 measuring receiver
Abrir Lightbox
R&S®FSMR3000 measuring receiver
Abrir Lightbox
R&S®FSMR3000 measuring receiver
Abrir Lightbox
R&S®FSMR3000 measuring receiver
Abrir Lightbox
R&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Hero view R&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Front view R&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Front High R&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Side view R&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Back view R&S®FSMR3000 R&S®FSMR3000 MEASURING RECEIVER, Back view

Key Facts

  • Frequency range from 2 Hz to 8/26.5/50 GHz
  • Highly accurate level calibrator with wide level measurement range from –152 dBm to +30 dBm
  • AM/FM/PM and dig. modulation analyzer
  • Full-featured signal and spectrum analyzer with up to 80 MHz analysis bandwidth
  • High-end phase noise analyzer with cross-correlation, typ. –163 dBc/Hz at 10 kHz offset (1 GHz)
  • 3-year warranty extension

Calibration and performance check of signal generators and attenuators

The R&S®FSMR3000 measuring receiver is a complete solution for calibration and performance checks of signal generators and fixed or adjustable attenuators.

The R&S®FSMR3000 is a microwave measurement receiver to calibrate signal generators and attenuators with one single instrument. Most important features provided are tuned RF level measurements, level measurements, analog modulation and spectrum analysis. Additionally, the R&S®FSMR3000 can be equipped with powerful hardware for high-end phase noise test supplementary to the standard phase noise test with the spectrum analyzer. It offers also digital and analog modulation signal analysis, 80 MHz analysis bandwidth, analysis of pulses and VOR/ILS signals. The R&S®FSMR as a single box instrument is designed to reduce complexity in calibration.

Features & benefits

Tuned RF Level (TRFL) calibration and power measurement

Excellent linearity and level stability and high tolerance with respect to frequency drift and residual FM

The R&S®FSMR3000 eliminates potential level errors by using adjacent range calibration. As a result, users benefit from the instrument’s high linearity of <(0.009 dB ± 0.005 dB/10 dB step) across the entire level range.

Tuned RF Level Measurement at 2.4 GHz
Abrir Lightbox

Tuned RF Level Measurement at 2.4 GHz

Direct connection of power sensors for accurate power measurements

No additional power meter is needed, The R&S®NRP power sensors can easily be connected and are automatically recognized by the instrument.

The R&S®NRP50T covers the whole frequency range from DC to 50 GHz and power sensors with a built-in power splitter simplify setup and testing since the DUT does not have to be repeatedly connected to the power sensor and the RF input of the R&S®FSMR3000. The R&S®NRP-Z27/-Z37 power sensor modules are available with a built-in power splitter for the R&S®FSMR3000.

AM/FM/PM Modulation analysis  

Measurement of modulation depth, frequency deviation and phase deviation with < 0.5 % measurement uncertainty

The R&S®FSMR3000 features a complete, integrated modulation analyzer for the AM, FM and PM analog  modulation modes. Audio parameters are measured on the demodulated signal. Various audio filters, deemphasis functions and detectors are available for audio analysis.

AM modulation analysis with result summary, spectrum and time domain view
Abrir Lightbox

AM modulation analysis with result summary, spectrum and time domain view

Full-features signal and spectrum analyzer

Measurement functions for spectral analysis, e.g. harmonics, TOI, etc. and 80 MHz bandwidth for signal analysis

The R&S®FSMR3-B1 option transforms the measuring receiver into a full-featured signal and spectrum analyzer to measure TOI, higher harmonics, noise figure or phase noise. Beside spectral mesurements, 80 MHz wide digital modulated signals can be analyzed, pulses or VOR/ILS signals.

Measurement of phase noise, ACP and higher harmonics and vector signal analysis of a digital modulated signal
Abrir Lightbox

Measurement of phase noise, ACP and higher harmonics and vector signal analysis of a digital modulated signal

High-end phase noise analyzer

High sensitivity through cross-correlation, high speed and parallel measurement of amplitude and phase noise due to real demodulation.

The R&S®FSMR3-B60 option turns the R&S®FSMR3000 measuring receiver into a full-featured phase noise analyzer. Due to its excellent internal sources, a second RX path allowing cross-correlation and largely digital architecture, the R&S®FSMR3000 is extremely fast and sensitive. It directly demodulates the signal using the CORDIC algorithm, enabling AM and phase noise to be displayed simultaneously in a single diagram or in separate windows.

High end phase noise measurement with x-corr and x-corr gain indicator
Abrir Lightbox

High end phase noise measurement with x-corr and x-corr gain indicator

Available models

Available models
Modelos
Frequency range
DANL @ 1 GHz
Phase noise

R&S®FSMR3008

Order Number 1345.4004.08

Frequency range
100 kHz - 8 GHz
DANL @ 1 GHz
-158 dBm
Phase noise
–163 dBc (1 Hz) (f = 1 GHz, 10 kHz offset)

R&S®FSMR3026

Order Number 1345.4004.26

Frequency range
100 kHz - 26.5 GHz
DANL @ 1 GHz
–156 dBm
Phase noise
–163 dBc (1 Hz) (f = 1 GHz, 10 kHz offset)

R&S®FSMR3050

Order Number 1345.4004.50

Frequency range
100 kHz - 50 GHz
DANL @ 1 GHz
-156 dBm
Phase noise
–163 dBc (1 Hz) (f = 1 GHz, 10 kHz offset)

Available options

General
Product
Descripción
R&S®FSMR3-K33

Order Number 1345.3743.02

Descripción

Security write protection for solid state drive

General
Product
Descripción
R&S®FSMR3-K980

Order Number 1345.3808.02

Descripción

Health and utilisation monitoring service

General
Product
Descripción
R&S®FSMR3-B1

Order Number 1345.3050.08

Descripción

Spectrum analyzer, 2 Hz to 8 GHz

for R&S®FSMR3008

R&S®FSMR3-B1

Order Number 1345.3050.26

Descripción

Spectrum analyzer, 2 Hz to 26 GHz

for R&S®FSMR3026

R&S®FSMR3-B1

Order Number 1345.3050.50

Descripción

Spectrum analyzer, 2 Hz to 50 GHz

for R&S®FSMR3050

R&S®FSMR3-B4

Order Number 1345.3072.02

Descripción

OCXO, precision frequency reference

R&S®FSMR3-B10

Order Number 1345.3089.02

Descripción

External generator control

R&S®FSMR3-B18

Order Number 1345.3095.02

Descripción

Spare solid-state drive

(removable hard disk drive)

R&S®FSMR3-B24

Order Number 1345.3108.08

Descripción

RF preamplifier, 100 kHz to 8 GHz

for R&S®FSMR3008

R&S®FSMR3-B24

Order Number 1345.3108.26

Descripción

RF preamplifier, 100 kHz to 26.5 GHz

for R&S®FSMR3026

R&S®FSMR3-B24

Order Number 1345.3108.49

Descripción

RF preamplifier, 100 kHz to 50 GHz

for R&S®FSMR3050

R&S®FSMR3-B60

Order Number 1345.3114.08

Descripción

Phase noise analyzer with cross-correlation, 1 MHz to 8 GHz

for R&S®FSMR3008, R&S®FSMR3-B4

R&S®FSMR3-B60

Order Number 1345.3114.26

Descripción

Phase noise analyzer with cross-correlation, 1 MHz to 26 GHz

for R&S®FSMR3026, includes R&S®FSMR3-B4

R&S®FSMR3-B60

Order Number 1345.3114.50

Descripción

Phase noise analyzer with cross-correlation, 1 MHz to 50 GHz

for R&S®FSMR3050, R&S®FSMR3-B4

R&S®FSMR3-B65

Order Number 1345.3120.02

Descripción

LO inputs for residual phase noise measurements

R&S®FSMR3-B60 option required

R&S®FSMR3-B8

Order Number 1345.3166.26

Descripción

Resolution bandwidth up to 80 MHz

for R&S®FSMR3008 and R&S®FSMR3026, R&S®FSMR3-B1 option required

R&S®FSMR3-B8

Order Number 1345.3166.50

Descripción

Resolution bandwidth up to 80 MHz

for R&S®FSMR3050, R&S®FSMR3-B1 option required

R&S®FSMR3-B13

Order Number 1345.3395.02

Descripción

Highpass filter

R&S®FSMR3-B8E

Order Number 1345.3372.02

Descripción

Resolution bandwidth up to 40 MHz

R&S®FSMR3-B1 option required

R&S®FSMR3-B80

Order Number 1345.3608.02

Descripción

80 MHz analysis bandwidth

R&S®FSMR3-B3

Order Number 1345.3066.02

Descripción

Audio input and analysis

General
Product
Descripción
R&S®FSMR3-K6

Order Number 1345.3137.02

Descripción

Pulse measurements

(R&SFSMR3-B1 option required)

R&S®FSMR3-K30

Order Number 1345.3637.02

Descripción

Noise figure measurements

(R&S®FSMR3-B1 option required, R&S®FSMR-B24 option recommended)  

R&S®FSMR3-K7

Order Number 1345.3389.02

Descripción

AM/FM/PM modulation analysis

(R&S®FSMR3-B1 option required)

R&S®FSMR3-K15

Order Number 1345.3143.02

Descripción

VOR / ILS measurements

(R&SFSMR3-B1 option required)

R&S®FSMR3-K40

Order Number 1345.3620.02

Descripción

Phase noise measurements

(Phase noise measurements without x-correlation; R&S®FSMR3-B1 option required)

R&S®FSMR3-K70

Order Number 1345.3150.02

Descripción

Vector signal analysis

(R&S®FSMR3-B1 option required)

R&S®FSMR3-K70P

Order Number 1345.3720.02

Descripción

BER PRBS measurements

(R&S®FSMR3-B1 and R&S®FSMR3-K70 options required)  

R&S®FSMR3-K70M

Order Number 1345.3737.02

Descripción

Multi-modulation analysis

(R&S®FSMR3-B1 and R&S®FSMR3-K70 options required) 

R&S®FSMR3-K50

Order Number 1345.3966.02

Descripción

Spurious measurements

Webinar: Reducir la incertidumbre de medida con receptores de pruebas de alta gama

Webinar: Reducir la incertidumbre de medida con receptores de pruebas de alta gama

Vea este webinar y compruebe cómo puede garantizar la seguridad de las medidas de los generadores de señales con el receptor de medidas R&S®FSMR3000.

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.