Downloads

LTE beamforming can be accurately tested with one or more R&S®RTO digital oscilloscopes for a 1×2, 1×4 or even a 1×8 MIMO system.

English - 8 ago 2024

The R&S®RTP and R&S®RTO oscilloscopes are capable of characterizing high speed datacom interfaces and performing in-depth signal integrity analysis.

English - 15 lug 2024

English - 31 gen 2024

Get insights into small cell testing aspects throughout the product life cycle with particular focus on production test solutions for FR2.

English - 19 giu 2023

Generating models with a VNA and using these on an oscilloscope via the deembedding

English - 22 mag 2023

How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE.

English - 12 gen 2022

This app note provides an introduction into the various jitter components and elucidates the commonly available jitter separation frameworks.

English - 8 dic 2021

The demand having a snubber circuit in the power supply topology leads to specific verification methods during the design which are the main focus within this document.

English - 23 giu 2021

Secondary surveillance radar (SSR) bridges the gap between communications systems and classic radar systems. Despite the increasing capabilities of mobile communications, SSR remains a major component in airspace surveillance.

English - 17 mag 2021

This application note discusses important aspects of double-pulse test setups as well as how to perform accurate measurements. Double-Pulse testing is a standard test-method.

English - 22 mar 2021

Characterize radar warning receivers with advanced triggerbased multichannel pulse analysis, using the R&S®VSE-K6A and a Rohde & Schwarz oscilloscope.

English - 2 mar 2021

The R&S®VSE is a powerful tool for comprehensive analysis of a variety of signals, providing full support to the Rohde & Schwarz oscilloscope advanced trigger system.

English - 3 feb 2021

The Rohde & Schwarz oscilloscope R&S®RTO2064 with powerful FFT analysis is great for EMI debugging and a low cost solution for R&D testing.

English - 14 gen 2021

The R&S®RTx-K50 option expands the addressable range of interface standards by adding decoding capability for standardized and proprietary Manchester or NRZ coded buses.

English - 19 ott 2020

This document describes a method to separate common-mode and differential-mode separation using two oscilloscope channels. This separation approach works without any additional hardware component.

English - 17 set 2020

This application note describes two test solutions from R&S® to cope with the 5G FR1 downlink MIMO signal analysis challenges either using R&S®RTP/RTO oscilloscope or R&S®NRQ6 frequency selective power sensor.

English - 26 giu 2020

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications.

English - 26 mag 2020

Read this application card to learn more about what the 10BASE-T1S Ethernet compliance test offers and how it ensures reliable operation and functionality.

English - 15 mag 2020

Thanks to their multichannel capability, oscilloscopes are ideal for multichannel applications such as the analysis of MIMO, multi-antenna radar and differential high-speed digital signals.

English - 6 mag 2020

The R&S®RTP/R&S®RTO and R&S®VSE meet the need to verify 5G NR MIMO signals and the signal characteristics of beamforming quickly and coherent.

English - 4 mar 2020

High dynamic range current measurements on IoT devices

English - 1 ott 2019

The application fields of oscilloscopes extend to EMI debugging because of their powerful and easy-to-use FFT analysis capabilities– and save time and money.

English - 23 set 2019

The R&S®RTO and R&S®RTP oscilloscopes are capable of triggering precisely on a pulse as a prerequisite for time domain and frequency domain analysis.

English - 13 mar 2019

This document describes the use of the R&S®RTO and R&S®RTP to demodulate RF pulses for further measurements and precisely trigger on and analyze RF pulses.

English - 13 mar 2019

For system verification and debugging, eye diagram measurements are the most important tools for efficiently analyzing the signal integrity in any digital design

English - 19 feb 2019

This application note describes Battery Life Measurements with the R&S®RT-ZVC02/04 Multi-Channel Probe. The measurements are described with the use of an oscilloscope.

English - 17 gen 2019

Automated measurement functions in combination with track functionality make it easier to analyze single events and reveal “long-term” variations.

English - 29 nov 2018

The numerous supply voltages of FPGAs, CPUs and DSPs need to be powered-up in a specific order to ensure reliable operation.

English - 8 ott 2018