R&S®FSW - Brochure e schede tecniche

R&S®FSW Signal and Spectrum Analyzer | シグナル・スペクトラム・アナライザ - Product Brochure Brochure e schede tecniche Product brochure

R&S®FSW Signal and Spectrum Analyzer | Анализатор спектра и сигналов - Product Brochure Brochure e schede tecniche Product brochure

This document provides the technical specifications of the R&S®FSW signal and spectrum analyzer.

The high-performance R&S®FSW signal and spectrum analyzer helps engineers accomplish the most demanding tasks. Its wide internal analysis bandwidth allows the characterization of wideband components and communications systems. Its unparalleled phase noise facilitates the development of high-performance oscillators such as those used in radars. A state-of-the-art multitouch display with gesture support ensures straightforward and intuitive operation. An embedded SCPI recorder enables easy creation of executable scripts.

Specifications for the R&S®FSW-K17 Multicarrier Group Delay Measurements option for the R&S®FSW signal and spectrum analyzer

160 MHz Real-time spectrum analyzer option

Reference measurements for calibrating navigation receivers, Production test measurements of ILS/VOR ground stations, Measurement and calibration of ramp testers

This document provides the technical specifications of the R&S®VSE-K149/FSx-K149 high rate pulse repetition frequency ultrawideband measurements.

Equipped with the R&S®FSW-B512R real-time spectrum analyzer option, the R&S®FSW displays RF spectra seamlessly and in real time.

160 MHz Real-Time Measurement Application, POI > 15 μs

Market-leading EVM performance in millimeter wave range

DOCSIS testing requirements include supporting a full channel load and coexistence of both DOCSIS 3.0 and DOCSIS 3.1 signals (in some cases analog TV as well). The R&S®CLGD is the only flexible and compact solution available on the market that can meet these testing requirements. The introduction of much wider bandwidths for DOCSIS 3.1 along with higher constellation modes (up to 16kQAM) require very powerful spectrum and signal analyzers. The R&S®FSW is ideal since it can measure MER that is typically 57 dB and higher and also provide BER measurements based on DOCSIS 3.1 signals.

Technical specifications of the R&S®FSW-K201 OneWeb Reverse Link (SC-FDMA) measurement application for the R&S®FSW signal and spectrum analyzer

Tackling a standard with wide bandwidth and high frequency

This document provides the technical specifications of the pulse measurement application – R&S®FSW/FSWP/FSMR3/FSV3/FSV/FPS/VSE-K6, R&S®FSWP-K6P, R&S®FSW/FSWP-K6S, R&S®VSE-K6A

This document provides the technical specifications of the R&S®FSW-K95/-K97 WLAN IEEE 802.11ad/ay measurement application.

English (PD 3606.7724.22)

English (PD 3607.1842.22)

English (PD 5214.6616.22)

R&S®FSW-B512R real-time spectrum analyzer 512 MHz, R&S®FSW-B800R real-time spectrum analyzer 800 MHz, R&S®FSW-K161R real-time spectrum measurement application 160 MHz, R&S®FSW-K512RE real-time spectrum measurement application 512 MHz, R&S®FSW-K800RE real-time spectrum measurement application 800 MHz

This document provides the technical specification of the EMI measurement application for signal and spectrum analyzers – R&S®FSW-K54, R&S®FSV3-K54, R&S®FPL1-K54, R&S®FSV-K54.

The EMI measurement application (K54 option) adds EMI precompliance measurement functions to the following spectrum analyzers: R&S®FSW, R&S®FSVA3000, R&S®FSV3000, R&S®FPL1000 and R&S®FSVR. It is the ideal EMI analysis extension for product development and a smooth certification process. Typical application fields include commercial, automotive, avionics and military product development (CISPR, EN, FCC, DO‑160 and MIL-STD-461 standards).

This document provides the technical specifications of the phase noise measurement application: R&S®FSW-K40, R&S®FSMR3-K40, R&S®FSV3-K40, R&S®FPS-K40, R&S®FSV-K40, R&S®FPL1-K40.

Technical specifications of the noise figure measurement options: R&S®FSW-K30, R&S®FSWP-K30, R&S®FSMR3-K30, R&S®FSV3-K30, R&S®FPS-K30, R&S®FSV-K30, R&S®FPL1-K30.

R&S®FSW-K96/R&S®FSWT-K96/R&S®FSV3-96/R&S®VSE-K96 OFDM Vector Signal Analysis Application

The specifications of the R&S®FSx-K91/p/n/ac/ax/be, R&S®FPS-K91/p/n/ac and R&S®VSE-K91/p/n/ac/ax/be WLAN measurement applications are based on the data sheet specifications of the R&S®FSW, R&S®FSVA3000, R&S®FSV3000 and R&S®FPS signal and spectrum analyzers.

This document provides the technical specifications of the R&S®FSx-K8 Bluetooth® measurement application.

This document provides the technical specifications of the VSE-K144 / -K146 / -K148 / -K171 / -K175 / FSx-K144 / -K145 / -K147 / -K148 / -K171 / -K175 / FPS-K144 / -K148 5G NR measurement application

High precision test solutions for todays and tomorrows ADAS-radar

Choosing the right instrument for your application

This document provides the technical specifications of the R&S®VSE-K70x/FSx-K70x/FPx-K70x vector signal analysis application.

Rohde & Schwarz has signal generation and analysis solutions that cover millimeterwave frequencies and beyond. Our signal generation and analysis solution portfolio addresses the bandwidth and frequency requirements for 5G and beyond, offering a wide range of features and application software for any testing challenge.

Scorri a sinistra Scorri a destra

Signal generation and analysis for 5G and beyond - Application Brochure

Signal generation and analysis for 5G and beyond - Application Brochure JA

This document provides the technical specifications of the R&S®VSE-K10, R&S®FSx-K10 GSM measurements

The measurement setup includes an R&S®FSW or R&S®FSV(A)3000 signal and spectrum analyzer or R&S®VSE compliant instruments with an R&S®SMW200A, R&S®SMM100A or R&S®SMBV100A vector signal generator. The closed loop system enables control of the signal generator and automatic synchronization.

From water to design-in

This document provides the technical specifications of the R&S®VSE-K106/FSx-K106/FPS-K106 EUTRA/LTE NB-IoT measurement application.

Test di array e antenne attive a scansione elettronica

Test solutions for safety and security in the new aviation era

The -K10x options cover the inband measurements of 3GPP LTE and LTE advanced. The R&S®VSE-K100/-K102/-K104 options provide convenient analysis due to automatic detection of modulation formats. Each signal subframe is analyzed and the QPSK, 16QAM or 64QAM modulation formats plus the length of the cyclic prefix are automatically detected and used in the analysis. The cell identity can also be automatically detected, which reduces the number of settings required by the user to a minimum.

Enhanced Specifications for AM/FM/φM Modulation Analysis

Rohde & Schwarz helps engineers develop and test satellite transponders, modules and components by providing the test and measurement solutions that the satellite market needs.

Scorri a sinistra Scorri a destra

Satellite payload and components testing with instruments from Rohde & Schwarz - Application Brochure

Satellite payload and components testing with instruments from Rohde & Schwarz - Application Brochure JA

This document provides the technical specifications of the R&S®FSx-K50 spurious measurement application.

This document provides an overview of the Rohde & Schwarz spectrum Analyzer portfolio.

Rohde & Schwarz signal and spectrum analyzers equipped with the R&S®FSx-K30 option form the basis of a solution to accurately measure the noise figure in the millimeterwave frequency range using the Y-factor method.

This document provides the technical specifications of the R&S®VSE-K60/R&S®FSx-K60 transient measurement application, the R&S®VSE-K60C/R&S®FSx-K60C transient chirp measurements, the R&S®VSE-K60H/R&S®FSx-K60H transient hop measurements and the R&S®FSx-K60P transient phase noise measurements.

This document provides the technical specifications of the R&S®VSE-K7/Fxx-K7/RTO AM/FM/PM modulation analysis option.

T&M solution guide for network infrastructure equipment providers

This document provides the technical specifications of the R&S®FSx-K18x amplifier measurements.