R&S®HX002H0 HF dipole with ATU

2 MHz to 30 MHz for stationary use and 1 kW transmit power

R&S®HX002H0 HF dipole with ATU
Ingrandisci immagine
R&S®HX002H0 HF dipole with ATU, front view

Key Facts

  • High RF power for small antennas (1 kW, 5 m radiator radius)
  • High efficiency (no resistive loading)
  • RF-cable-only interface
  • Universal transceiver control interface and power supply
  • Fully automatic operation in autonomous mode

For stationary use and 1 kW transmit power

The R&S®HX002H0 HF dipole with ATU enables optimum coverage of all distance ranges. It is particularly useful for radiocommunications over short and medium distances since skip zones can degrade vertical rod antenna transmission reliability at distances of less than 1000 km. The fully automatic ATU is integrated in the antenna, providing perfect matching to the transmitting system and making available full RF output power capabilities. The high antenna efficiency comes from locating the matching network directly at the dipole feed point.

Features & benefits

High RF power in a small antenna

The R&S®HK002H0 features relatively small, five-meter-long, dipole based radiators. The integrated fully automatic antenna tuning unit provides perfect matching of these radiators to the transmitting system, enabling full RF output power capabilities of up to 1 kW.

High efficiency

The R&S®HX002H0 uses only low-loss capacitors and air-core coils for matching and has no attenuators such as resistor-damped structures, making it more efficient and sending more power into the airwaves.

HF-cable-only interface

The R&S®HX002H0 has a single cable interface. Just one cable carries all the signals (RF, power supply and control), making installation and system integration both easier and more reliable.

High compatibility with a variety of transceivers

The R&S®GX002 junction unit fully controls and powers the R&S®HX002H0. The junction unit handles all communications to and from the transceiver. Universal LAN, coaxial and optical port interfaces allow the junction unit to work with the latest shortwave transceivers, older Rohde & Schwarz transceivers in legacy applications and transceivers from other manufacturers.

Fully autonomous mode

The combination of the R&S®GX002 junction unit and the R&S®HX002H0 enables operations in "autonomous mode". This requires very few control signals and allows third-party transceivers to operate without control protocol adjustments.

Available options

Accessories
Product
Descrizione
R&S®KM002Z0

Order Number 4115.9005.02

Descrizione

Mast, 5 m

R&S®KM002Z0-K

Order Number 4115.9505.02

Descrizione

Tilt kit

R&S®KM451B1

Order Number 4028.3351.02

Descrizione

Lattice mast, length: 10 m (for roof mounting)

Lattice mast for the R&S®HX002, the R&S®HX002A1, the R&S®HX002H1, the R&S®HL451, the R&S®HL471, 10 meters, with guy ropes and safety climb

R&S®KM451B2

Order Number 4028.3400.02

Descrizione

Lattice mast, length: 15 m (standard)

Lattice mast for the R&S®HX002, the R&S®HX002A1, the R&S®HX002H1, the R&S®HL451, the R&S®HL471, 15 meters, with guy ropes and safety climb

R&S®KM002Z3

Order Number 4115.9540.02

Descrizione

Isolating rope set for the R&S®KM451B1/B2;
for use together with the R&S®HX002H0, R&S®HX002H1/H2/H3

R&S®KM002Z2

Order Number 4115.9640.02

Descrizione

Legacy mast adapter

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.