R&S®RTA4000 oscilloscope

R&S®RTA4000 oscilloscope
Ingrandisci immagine
R&S®RTA4000 oscilloscope
Ingrandisci immagine
R&S®RTA4000 oscilloscope
Ingrandisci immagine
R&S®RTA4000 oscilloscope
Ingrandisci immagine
R&S®RTA4000 oscilloscope
Ingrandisci immagine
R&S®RTA4000 Oscilloscope, Front view R&S®RTA4000 Oscilloscope, Front view R&S®RTA4000 Oscilloscope, Side view R&S®RTA4000 Oscilloscope, Hero view R&S®RTA4000 Oscilloscope, Application Image

Key Facts

  • Bandwidth: 200 MHz to 1 GHz
  • Sample rate: up to 5 Gsample/s
  • Memory depth: up to 1 Gsample
  • ADC resolution: 10-bit
  • Display: 10.1’’ capacitive touchscreen

A partire da 5.440 EUR

See more of your signal with the power of 10

Designed with top class signal integrity and responsive ultra-deep memory, the R&S®RTA4000 brings the power of 10 to a new level. The Rohde & Schwarz designed 10-bit ADC plus class-leading noise and memory depth provides sharp waveforms, more accurate measurements and confidence when facing unexpected measurement challenges.

Features & benefits

Signal analysis: quick results

See small signal details in the presence of large signals

The R&S®RTA4000 features a customized Rohde & Schwarz designed 10-bit A/D converter and is a four-fold improvement over conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed. One example is the characterization of switched-mode power supplies. The voltage across the switching device must be determined during the on/off times within the same acquisition.

10-bit A/D converter
Ingrandisci immagine

10-bit A/D converter

10-bit A/D converter uncovers even small signal details and ensures vertical resolution four times higher than traditional oscilloscopes.

Segmented memory

100 Msample standard and 200 Msample interleaved

The R&S®RTA4000 offers top class memory depth with 100 Msample per channel available and even 200 Msample in interleaved mode. This is ten times more than similar oscilloscopes in the same instrument class. The user can capture longer acquisition sequences even at high sampling rates for more analysis results, such as when analyzing transients of switched-mode power supplies.

100 Msample standard memory
Ingrandisci immagine

100 Msample standard memory

Capture and analyze pulsed and burst signals over a long period with up to 200 Msample standard acquisition memory

Capture more time at full bandwidth

Segmented memory: 1000 Msample with history function

The R&S®RTA-K15 option with deep, segmented memory analyzes signal sequences over a long observation period. Protocol-based signals with communications gaps such as I²C or SPI can be captured over several seconds or minutes. The variable segment size optimally utilizes the 1000 Msample memory. In history mode, previous acquisitions in the maximum segmented memory depth of 1000 Msample are available for further analysis.

1000 Msample segmented memory
Ingrandisci immagine

1000 Msample segmented memory

Capture the longest time periods with topclass 1000 Msample memory

Logic analysis with the MSO option

16 additional digital channels

The R&S®RTA-B1 option turns every R&S®RTA4000 into an intuitive MSO with 16 additional digital channels. The oscilloscope captures and analyzes signals from the analog and digital components of an embedded design - synchronized and time correlated to each other. For example, the delay between A/D converter input and output can conveniently be determined with the cursor measurements.

Four-bit DAC signal change.
Ingrandisci immagine

Four-bit DAC signal change.

The R&S®RTA4000 captures and analyzes analog and digital signals synchronized and time-correlated with each other.

Waveform and pattern generator

Generate analog and digital stimuli

The R&S®RTA-B6 waveform and pattern generator for up to 50 Mbit/s is useful for educational purposes and prototype hardware implementation. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Predefined patterns including. I2C, SPI, UART and CAN/LIN can be used.

Waveform and pattern generator
Ingrandisci immagine

Waveform and pattern generator

In addition to common sine, square/pulse, ramp and noise waveforms, it outputs user-defined waveforms and 4-bit signal patterns.

Digital voltmeter

Measure and display electrical potential

The R&S®RTA4000 features a 3-digit voltmeter (DVM) and 6-digit frequency counter on each channel for simultaneous measurements. Standard measurement functions include DC, AC+DC (RMS) and AC (RMS).

Digital voltmeter
Ingrandisci immagine

Digital voltmeter

The 3-digit voltmeter measures and displays the electrical potential difference between two points in an electric circuit.

Frequency analysis mode

Difficult-to-find faults often result from the interaction between time and frequency signals. The R&S®RTA4000 FFT function is activated at the push of a button and by simpling entering the center frequency and span. Thanks to the high-performance FFT function of the R&S®RTA4000 oscilloscope, signals can be analyzed with up to 128k points. Other practical tools include cursor measurements and autoset in frequency domain.

FFT of a square wave
Ingrandisci immagine

FFT of a square wave

The high-performance FFT functionality analyzes signals up to 128k points.

Mask test mode

Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. Masks assess the quality and stability of a DUT based on statistical pass/fail evaluations. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation generates a pulse output at the AUX-OUT connector on the R&S®RTA4000. This pulse output can be used to trigger actions in the measurement setup.

Mask test with result statistics
Ingrandisci immagine

Mask test with result statistics

The pass/fail evaluation assesses DUT quality and stability.

The best choice for power

See power signal details with up to 10-bit resolution

Even the smallest signal details of a high dynamic signal are important in power measurements. RDS (on) verification for a MOSFET is one example. The high ADC resolution of R&S®RTA4000 oscilloscopes increases vertical resolution up to 10 bits. Previously unseen signal details are revealed and measurable. The RDS(on) example shows how the slope of the drain-to-source-voltage can be measured while the switch is closed.

Power analysis
Ingrandisci immagine

Power analysis

Analyze input, output and transfer functions of switched-mode power supplies

Available models

Available models
Modelli
Bandwidth
Channels
Sample rate
Max. memory depth
Optional MSO
Orario d'inizio

R&S®RTA4004

Order Number 1335.7700P04

Bandwidth
200 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
200 Mpts
Optional MSO
16 digital channels
Orario d'inizio

R&S®RTA4004 + RTA-B243

Order Number 1335.7700P34

Bandwidth
350 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
200 Mpts
Optional MSO
16 digital channels
Orario d'inizio

R&S®RTA4004 + RTA-B245

Order Number 1335.7700P54

Bandwidth
500 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
200 Mpts
Optional MSO
16 digital channels
Orario d'inizio

R&S®RTA4004 + RTA-B2410

Order Number 1335.7700P64

Bandwidth
1 GHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
200 Mpts
Optional MSO
16 digital channels
Orario d'inizio
Specifications
Vertical system
Analog channels 4
Digital channels (opt.) 16
Bandwidth (-3 dB) R&S®RTA4004 (with R&S®RTA-B24x options) 200 MHz, 350 MHz, 500 MHz, 1 GHz
Rise time R&S®RTA4004 (with R&S®RTA-B24x options) 1.75 ns, 1 ns, 700 ps, 350 ps
Input impedance 50 Ω ± 1,5% (meas.), 1 MΩ ± 1 % (meas.) || 14 pF ± 1 pF (meas.)
Input sensitivity max. bandwidth in all range at 1 MΩ: 500 μV/div to 10 V/div
at 50 Ω: 500 μV/div to 1 V/div
ADC resolution 10 bit, up to 16 bit with high resolution decimation
DC gain accuracy offset and position = 0, maximum operating temperature change of ±5°C after self-alignment input sensitivity > 5 mV/div: ±1 % of full scale
input sensitivity ≤ 5 mV/div to ≥ 1 mV/div: ±1.5 % of full scale
input sensitivity < 1 mV/div: ±2.5 % of full scale
Acquisition system
Realtime sampling rate 2.5 Gsample/s; 5 Gsample/s, interleaved
Acquisition memory 100 Msample (200 Msample, interleaved);
1 Gsample segmented memory
Max. acquisition rate 64 000 waveforms/s
(2 000 000 in fast segmented memory mode)
Horizontal system
Timebase range selectable between 0.5 ns/div and 500 s/div
Accuracy (after delivery/calibration) ±0.5 ppm
Channel-to-channel skew < 200 ps (meas.)
Channel deskew ±500 ns
Trigger system
Standard trigger types edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus
Optional trigger types I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN, audio (I2S),ARINC 429, MIL-STD-1553
Trigger sensitivity with DC, AC, LF reject, noise reject 1 GHz, 500 MHz, 350 MHz > 2.2 mVpp input sensitivity + 1 div (nom.) (input sensitivity: [mV/div]) 200 MHz, 100 MHz > 1.5 mVpp input sensitivity + 0.8 div (nom.) (input sensitivity: [mV/div]) 20 MHz > 0.6 mVpp input sensitivity + 0.4 div (nom.) (input sensitivity: [mV/div]) with HF reject all input sensitivities 1 div (meas.)
Analysis and measurement functions
Automatic measurements 32
Cursor measurements 4
Waveform mathematics 5 equations math on math (addition, subtraction, multiplication, division, square, square root, abs. value, reciprocal, inverse, common log,, natural log., derivative, integral, low pass, high pass, track unipolar + bipolar on period, frequency, pulse width, duty cycle)
Mask testing
Mask definition elementary (tolerance mask around the signal)
History and segmented memory
Number of segments up to 87 380
Protocol trigger and decode
Supported protocols I2C, SPI, UART/RS-232/RS-422/RS-485, CAN, LIN, I2S, MIL-STD-1553, ARINC429
Waveform generator
Resolution 14 bit
Sample rate 250 Msample/s
Amplitude high Z; 50 Ω 20 mV to 10 V (Vpp); 10 mV to 5 V (Vpp)
DC offset high Z; 50 Ω ±5 V; ±2.5 V
Arbitrary max. 10 Msample/s; 32k point
Logic analyzer (MSO) functionality
Digital input channels 16
MSO memory depth two logic probes: 100 Msample for every channel
one logic probe: 200 Msample for every channel
MSO Bandwidth 400 MHz (meas.)
MSO sampling rate 2.5 Gsample/s; 5 Gsample/s, interleaved
MSO input impedance 100 kΩ ± 2 % || ~4 pF (meas.) at probe tips
Parallel buses up to 4
General data
Dimensions W × H × D 390  mm × 220 mm × 152 mm
(15.4 in × 8.66 in × 5.98 in)
Weight 3.3 kg (7.3 lb)
Display 10.1" WXGA TFT color display (1280 × 800 pixel)
Interfaces USB host with MTP, USB device, LAN, powerful web server for remote display and operation
Operating system Windows 10, Embedded

Available options

General
Product
Descrizione

Order Number 1335.7823.02

Descrizione

Mixed signal option: 400 MHz

Turns R&S®RTA4000 oscilloscopes into fast, precise and easy-to-use mixed signal oscilloscopes (MSO).

R&S®RTA-B6

Order Number 1335.7830.02

Descrizione

Arbitrary waveform generator

Adds a 25 MHz signal generator and a 4-bit pattern generator to your R&S®RTA4000 oscilloscopes.

Bandwidth upgrade
Product
Descrizione
R&S®RTA-B243

Order Number 1335.7846.02

Descrizione

Bandwidth upgrade of the R&S®RTA4004 to 350 MHz bandwidth

R&S®RTA-B245

Order Number 1335.7852.02

Descrizione

Bandwidth upgrade of the R&S®RTA4004 to 500 MHz bandwidth

R&S®RTA-B2410

Order Number 1335.7869.02

Descrizione

Bandwidth upgrade of the R&S®RTA4004 to 1 GHz bandwidth

Serial triggering and decoding
Product
Descrizione
R&S®RTA-K1

Order Number 1335.7681.02

Descrizione

I²C/SPI serial triggering and decoding

Triggering and decoding of I²C and 2-wire, 3-wire or 4-wire SPI buses

R&S®RTA-K2

Order Number 1335.7698.02

Descrizione

UART/RS-232/RS-422/RS-485 serial triggering and decoding

Triggering and decoding of UART based protocols and RS-232, RS-422 as well as RS-485 buses

R&S®RTA-K3

Order Number 1335.7717.02

Descrizione

CAN/LIN serial triggering and decoding

Triggering and decoding of CAN and LIN interfaces

R&S®RTA-K5

Order Number 1335.7723.02

Descrizione

I²S/LJ/RJ/TDM triggering and decoding

Triggering and decoding of I²S buses

R&S®RTA-K6

Order Number 1335.7730.02

Descrizione

MIL-1553 serial triggering and decoding

Triggering and decoding of MIL-STD-1553 buses

R&S®RTA-K7

Order Number 1335.7746.02

Descrizione

ARINC 429 serial triggering and decoding

Triggering and decoding of ARINC 429 buses

General analysis
Product
Descrizione
R&S®RTA-K31

Order Number 1335.7769.02

Descrizione

Power analysis

When analyzing power electronics, the input and output and the internal transfer function of the component have to be characterized. The power analysis option provides the necessary measurement functions, including inrush current, output spectrum and safe operating area (SOA).

R&S®RTA-K36

Order Number 1335.7975.02

Descrizione

Frequency Response Analysis (Bode plot)

The R&S®RTA-K36 frequency response analysis (Bode plot) option lets you perform low-frequency response analysis on your oscilloscope easily and quickly. It characterizes the frequency response of a variety of electronic devices, including passive filters and amplifier circuits. For switch mode power supplies, it measures the control loop response and power supply rejection ratio.

R&S®RTA-K37

Order Number 1335.7981.02

Descrizione

Spectrum analysis and spectrogram

The spectrum analysis option enhances the powerful FFT capability of R&S®RTA4000 oscilloscopes with spectrogram display.

General accessories
Product
Descrizione
R&S®RTB-Z1

Order Number 1333.1728.02

Descrizione

Front cover

Protects the front of the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000

R&S®RTB-Z3

Order Number 1333.1734.02

Descrizione

Soft bag

Stores the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 oscilloscope and accessories

R&S®RTB-Z4

Order Number 1335.9290.02

Descrizione

Transit case with wheels for R&S®RTB

Order Number 1335.7875.02

Descrizione

Accessory case for probes and small parts for all Rohde and Schwarz oscilloscopes

R&S®RT-Z2T

Order Number 1338.0007.02

Descrizione

Probe adapter

Enables Tek’s TekProbe-BNC level 2 probes to connect to Rohde & Schwarz probe interface

R&S®ZZA-RTB2K

Order Number 1333.1711.02

Descrizione

19" rackmount adapter for R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 with 5HU

Passive probes
Product
Descrizione

Order Number 1333.2401.02

Descrizione

Passive probe, 500 MHz, 10:1

Order Number 1409.7550.00

Descrizione

Passive probe, 500 MHz, 10:1

Order Number 1333.1370.02

Descrizione

Passive probe, 38 MHz, 1:1

Active single-ended probes
Product
Descrizione

Order Number 1333.0815.02

Descrizione

Active single-ended probe, 1 GHz, BNC interface

Order Number 1418.7007.02

Descrizione

Active single-ended probe, 1 GHz, Rohde & Schwarz probe interface

Order Number 1410.4080.02

Descrizione

Active single-ended probe, 1 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

Order Number 1410.3502.02

Descrizione

Active single-ended probe, 1.5 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

Active differential probes
Product
Descrizione

Order Number 1410.4715.02

Descrizione

Active differential probe, 1 GHz, Rohde & Schwarz probe interface

Order Number 1410.4409.02

Descrizione

Active differential probe, 1.5 GHz, Rohde & Schwarz probe interface

Power rail probes
Product
Descrizione

Order Number 1800.5006.02

Descrizione

Power rail probe, 2 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

2.0 GHz, 1:1, 50 kΩ, R&S probe interface

High voltage probes
Product
Descrizione

Order Number 1333.0873.02

Descrizione

250 MHz passive high voltage probe

Order Number 1409.7720.02

Descrizione

400 MHz passive high voltage probe

Order Number 1409.7737.02

Descrizione

400 MHz passive high voltage probe

Order Number 1337.9700.02

Descrizione

25 MHz High voltage differential probe

Order Number 1337.9800.02

Descrizione

25 MHz High voltage differential probe

Order Number 1422.0703.02

Descrizione

100 MHZ high voltage differential probe

Order Number 1333.0821.02

Descrizione

Active differential probe, 200 MHz, BNC interface

Order Number 1333.0838.02

Descrizione

Active differential probe, 800 GHz, BNC interface

Order Number 1800.2307.02

Descrizione

200 MHz High voltage differential probe

Order Number 1800.2107.02

Descrizione

100 MHz High voltage differential probe

Order Number 1800.2207.02

Descrizione

200 MHz High voltage differential probe

Order Number 1800.2007.02

Descrizione

100 MHz High voltage differential probe

Current probes
Product
Descrizione

Order Number 1333.0850.02

Descrizione

AC/DC 20 kHz current probe

Order Number 1333.0844.02

Descrizione

100 kHz current probe

Order Number 1409.8204.02

Descrizione

2 MHZ current probe

Order Number 1409.7750K02

Descrizione

10 MHZ current probe

Order Number 1409.8210.02

Descrizione

10 MHZ Current probe

Order Number 1409.8227.02

Descrizione

50 MHZ Current probe

Order Number 1409.7766K02

Descrizione

100 MHZ current probe

Order Number 1409.8233.02

Descrizione

100 MHZ current probe

Order Number 1409.7772K02

Descrizione

120 MHz current probe

Order Number 1801.4932.02

Descrizione

120 MHz current probe

EMC near-field probes
Product
Descrizione

Order Number 1147.2736.02

Descrizione

E and H near-field probe set

Logic probes
Product
Descrizione
R&S®RT-ZL04

Order Number 1333.0721.02

Descrizione

400 MHz logic probe

Probe accessories
Product
Descrizione

Order Number 1409.7789.02

Descrizione

Power supply for probes

Power supply for R&S®RT-ZC10/20/30 probes, +/-12V DC, +/-2.5A

Order Number 1410.4744.02

Descrizione

External attenuator

10:1, 2.0 GHz, 1.3 pF, 60 V DC, 42 V AC (peak) for R&S®RT-ZD20/30 probes. Included in R&S®RT-ZD10.

Order Number 1800.0004.02

Descrizione

Power deskew fixture

Deskew fixture for voltage and current probes for power measurements; includes USB 2.0 cable for power supply

Order Number 1326.3641.02

Descrizione

3D probe positioner

3D positionier with central tensioning knob for easy clamping and positioning of probes (span width: 200 mm, clamping range: 15 mm)

Application bundles
Product
Descrizione
R&S®RTA-PK1

Order Number 1335.7775.02

Descrizione

Application bundle (R&S®RTA-K1, -K2, -K3, -K5, -K6, -K7, -K31, -K36, -K37 and -B6)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTA-K1), UART/RS-232/RS-422/RS-485 (R&S®RTA-K2) and CAN/LIN (R&S®RTA-K3), I²S (R&S®RTA-K5), MIL-1553 (R&S®RTA-K6), ARINC429 (R&S®RTA-K7), spectrum analysis and spectrogram (R&S®RTA-K37), power analysis (R&S®RTA-K31), frequency response analysis (R&S®RTA-K36), arbitrary generator (R&S®RTA-B6) for R&S®RTA4000 models

R&S®RTA-PK1US*

Order Number 1335.7998.02

Descrizione

Application bundle (R&S®RTA-K1, -K2, -K3, -K5, -K6, -K7, -K31, -K36, -K37 and -B6)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTA-K1), UART/RS-232/RS-422/RS-485 (R&S®RTA-K2) and CAN/LIN (R&S®RTA-K3), I²S (R&S®RTA-K5), MIL-1553 (R&S®RTA-K6), ARINC429 (R&S®RTA-K7), power analysis (R&S®RTA-K31), frequency response analysis (R&S®RTA-K36), spectrum analysis and spectrogram (R&S®RTA-K37), arbitrary generator (R&S®RTA-B6) for R&S®RTA4000 models * ONLY distributed in North America

R&S®RTA4000 - Media Center

R&S®RTA4000 - Media Center

Vedi di più

Video applicativi degli oscilloscopi - Media Center

Vedi di più

Altri temi di interesse

10 anni di innovazioni per gli oscilloscopi Rohde & Schwarz

Maggiori informazioni

Promozione sugli oscilloscopi

Scegliete la promozione Rohde & Schwarz più adatta alle vostre esigenze e risparmiate

Maggiori informazioni

Webinar su oscilloscopi per applicazioni di elettronica di potenza e progettazione digitale

Maggiori informazioni

Soluzione per

Progettazione e test di circuiti analogici / digitali

Scopri le soluzioni Rohde & Schwarz per la verifica dell'integrità del segnale e dell'alimentazione, misura di piccoli segnali e debug EMI.

Maggiori informazioni

Collaudo elettronica di potenza

Utilizzate le nostre soluzioni di misura per creare un prodotto affidabile a basso consumo energetico.

Maggiori informazioni

Richiedi informazioni

Hai qualche domanda o ti servono altre informazioni? Compila il modulo e ti ricontatteremo al più presto.

Desidero ricevere informazioni da Rohde & Schwarz tramite

Autorizzazione al marketing

Cosa significa nello specifico?

Accetto che ROHDE & SCHWARZ GmbH & Co. KG e l’entità ROHDE & SCHWARZ o l’azienda controllata riportata nelle note legali di questo sito web, potrà contattarmi tramite il canale prescelto (e-mail o posta) per scopi di marketing e pubblicità (ad es., informazioni su offerte speciali e sconti) in relazione a, in via non limitativa, prodotti e soluzioni del settore di collaudo e misurazione, comunicazioni sicure, monitoraggio e collaudo di rete, trasmissione, media e sicurezza informatica.

I tuoi diritti

La presente dichiarazione di consenso può essere revocata in qualsiasi momento inviando una e-mail con oggetto “Annulla iscrizione" all’indirizzo news@rohde-schwarz.com. In più, in ciascuna e-mail pubblicitaria inviata sarà allegato un link per annullare l’iscrizione. Nella ”Dichiarazione di riservatezza” vengono definiti ulteriori dettagli sull’utilizzo dei dati personali e sulla procedura di ritiro.

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.