R&S®RTM3000 oscilloscope

R&S®RTM3000 oscilloscope
Ingrandisci immagine
R&S®RTM3000 oscilloscope
Ingrandisci immagine
R&S®RTM3000 oscilloscope
Ingrandisci immagine
R&S®RTM3000 oscilloscope
Ingrandisci immagine
R&S®RTM3000 oscilloscope
Ingrandisci immagine
R&S®RTM3000 oscilloscope
Ingrandisci immagine
R&S®RTM3000 Oscilloscope, Front viewR&S®RTM3000 Oscilloscope, Front viewR&S®RTM3000 Oscilloscope, Side viewR&S®RTM3000 Oscilloscope, Side viewR&S®RTM3000 Oscilloscope, Hero viewR&S®RTM3000 Oscilloscope, Application Image

Key Facts

  • Bandwidth: 100 MHz to 1GHz
  • Sample rate: up to 5 Gsample/s
  • Memory depth: up to 80 Msample
  • ADC resolution: 10-bit
  • Display: 10.1’’ capacitive touchscreen
  • Promo oscilloscopes
  • 10 years oscilloscopes
  • 3 year warranty extension
  • EDN Hot 100 product

See more of your signal with the power of 10

Designed as daily problem-solving tool, the R&S®RTM3000 combines the power of ten (10-bit ADC, 10 times the memory and 10.1' touchscreen) with a Rohde & Schwarz probe interface for all Rohde & Schwarz probes.

  • Four times more vertical resolution than standard 8-bit ADCs
  • Maintains fast sampling rates at all times
  • 10.1' touchscreen with gesture support

Features & benefits

Signal analysis: quick results

See small signal details in the presence of large signals

The R&S®RTM3000 features a customized Rohde & Schwarz designed 10-bit A/D converter that delivers a four-fold improvement over conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed. One example is the characterization of switched-mode power supplies. The voltages across the switching device must be determined during the on/off times within the same acquisition.

10-bit A/D converter
Ingrandisci immagine

10-bit A/D converter

10-bit A/D converter uncovers even small signal details and ensures a vertical resolution four times higher than traditional oscilloscopes.

Segmented memory

40 Msample standard and 80 Msample interleaved

The R&S®RTM3000 offers a class-leading memory depth: 40 Msample per channel are available, even 80 Msample in interleaved mode. This is eight times more than similar oscilloscopes in the same instrument class. The user captures longer acquisition sequences even at high sampling rates for more analysis results, e.g. when analyzing transients of switched-mode power supplies.

40 Msample standard memory
Ingrandisci immagine

40 Msample standard memory

Capture and analyze pulsed and burst signals over a long period with up to 80 Msample standard acquisition memory

Capture more time at full bandwidth

Segmented memory: 400 Msample with history function

The R&S®RTM-K15 option with deep, segmented memory analyzes signal sequences over a long observation period. Protocol-based signals with communications gaps such as I²C or SPI can be captured over several seconds or minutes. Thanks to the variable segment size the 400 Msample memory is optimally utilized. In history mode, previous acquisitions to the maximum segmented memory depth of 400 Msample are available for further analysis.

400 Msample segmented memory
Ingrandisci immagine

400 Msample segmented memory

Capture the longest time periods with class-leading 400 Msample memory

Logic analysis with the MSO option

16 additional digital channels

The R&S®RTM-B1 option turns every R&S®RTM3000 into an intuitive-to-use MSO with 16 additional digital channels. The oscilloscope captures and analyzes signals from analog and digital components of an embedded design – synchronously and timecorrelated to each other. For example, the delay between input and output of an A/D converter can conveniently be determined using the cursor measurements.

4-bit DAC signal change
Ingrandisci immagine

4-bit DAC signal change

The R&S®RTM3000 captures and analyzes analog and digital signals synchronously and time-correlated with each other.

Waveform and pattern generator

Generate analog and digital stimuli

The R&S®RTM-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Predefined patterns for e.g. I2C, SPI, UART and CAN/LIN can be used.

Waveform and pattern generator
Ingrandisci immagine

Waveform and pattern generator

In addition to common sine, square/pulse, ramp and noise waveforms, it outputs user-defined waveforms and 4-bit signal patterns.

Digital voltmeter

Measure and display electrical potential

The R&S®RTM3000 features a 3-digit voltmeter (DVM) and 6-digit frequency counter on each channel for simultaneous measurements. Measurement functions include DC, AC+DC (RMS) and AC (RMS) – included as standard.

Digital voltmeter
Ingrandisci immagine

Digital voltmeter

The 3-digit voltmeter measures and displays the electrical potential difference between two points in an electric circuit.

Frequency analysis mode

Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S®RTM3000 is activated at the push of a button and by simpling entering the center frequency and span. Thanks to the R&S®RTM3000 oscilloscopes’ high-performance FFT functionality, signals can be analyzed with up to 128k points. Other practical tools include cursor measurements and autoset in frequency domain.

FFT of a square wave
Ingrandisci immagine

FFT of a square wave

The high-performance FFT functionality analyzes signals up to 128k points.

Mask test mode

Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. Masks assess the quality and stability of a DUT based on statistical pass/fail evaluation. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation can generate a pulse output at the AUX-OUT connector on the R&S®RTM3000. This pulse output can be used to trigger actions in the measurement setup.

Mask test with result statistics
Ingrandisci immagine

Mask test with result statistics

The pass/fail evaluation assesses the quality and stability of the DUT

The best choice for power

See power signal details with up to 10-bit resolution

Even the smallest signal details of a high dynamic signal matter for power measurements. Verification of RDS(on) of a MOSFET is one example. The high ADC resolution of the R&S®RTM3000 oscilloscopes increases the vertical resolution up to 10 bit. Previously unseen signal details become visible and measurable. In the example of RDS(on), it makes it possible to measure the slope of the drain-to-source-voltage while the switch is closed.

Power analysis
Ingrandisci immagine

Power analysis

Analyze the input, output and transfer function of switched-mode power supplies

Available models

Available models
Modelli
Bandwidth
Channels
Sample rate
Max. memory depth
Optional MSO

R&S®RTM3002

Order Number 1335.8794.02

Bandwidth
100 MHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004

Order Number 1335.8794.04

Bandwidth
100 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3002 + RTM-B222

Order Number 1335.8794P22

Bandwidth
200 MHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004 + RTM-B242

Order Number 1335.8794P24

Bandwidth
200 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3002 + RTM-B223

Order Number 1335.8794P32

Bandwidth
350 MHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004 + RTM-B243

Order Number 1335.8794P34

Bandwidth
350 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3002 + RTM-B225

Order Number 1335.8794P52

Bandwidth
500 MHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004 + RTM-B245

Order Number 1335.8794P54

Bandwidth
500 MHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3002 + RTM-B2210

Order Number 1335.8794P62

Bandwidth
1 GHz
Channels
2
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels

R&S®RTM3004 + RTM-B2410

Order Number 1335.8794P64

Bandwidth
1 GHz
Channels
4
Sample rate
5 Gsample/s
Max. memory depth
80 Mpts
Optional MSO
16 digital channels
Specifications
Vertical system
Analog channelsR&S®RTM3002; R&S®RTM30042; 4
Digital channels (opt.)16
Bandwidth (-3 dB)R&S®RTM3002/3004 (with R&S®RTM-B2x2/-B2x3/-B2x5/-B2x10 options)100 MHz, 200 MHz, 350 MHz, 500 MHz, 1 GHz
Rise timeR&S®RTM3002/3004 (with R&S®RTM-B2x2/-B2x3/-B2x5/-B2x10 options)3.5 ns, 1.75 ns, 1 ns, 700 ps, 350 ps
Input impedance50 Ω ± 1,5% (meas.), 1 MΩ ± 1 % (meas.) || 14 pF ± 1 pF (meas.)
Input sensitivitymax. bandwidth in all rangesat 1 MΩ: 500 μV/div to 10 V/div
at 50 Ω: 500 μV/div to 1 V/div
ADC resolution10 bit, up to 16 bit with high resolution decimation
DC gain accuracyoffset and position = 0, maximum operating temperature change of ±5°C after self-alignmentinput sensitivity > 5 mV/div: ±1.5 % of full scale
input sensitivity > 5 mV/div: ±2 % of full scale
Acquisition system
Realtime sampling rate2.5 Gsample/s; 5 Gsample/s, interleaved
Acquisition memorystandard: 40 Msample (80 Msample interleaved)
with R&S®RTM-K15 option: 400 Msample segmented memory
Max. acquisition rate64 000 waveforms/s
(2 000 000 in fast segmented memory mode)
Horizontal system
Timebase rangeselectable between 0.5 ns/div and 500 s/div
Accuracy (after delivery/calibration)±2.5 ppm
Channel-to-channel skew< 200 ps (meas.)
Channel deskew±500 ns
Trigger system
Standard Trigger typesedge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus, timeout
Optional Trigger typesI2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN,ARINC 429, MIL-STD-1553
Trigger sensitivitywith DC, AC, LF reject, noise reject 1 GHz, 500 MHz, 350 MHz > 2.2 mVpp input sensitivity + 1 div (nom.) (input sensitivity: [mV/div]) 200 MHz, 100 MHz > 1.5 mVpp input sensitivity + 0.8 div (nom.) (input sensitivity: [mV/div]) 20 MHz > 0.6 mVpp input sensitivity + 0.4 div (nom.) (input sensitivity: [mV/div]) with HF reject all input sensitivities 1 div (meas.)
Analysis and measurement functions
Automatic measurements32
Cursor measurements4
Waveform mathematics5 equations math on math (addition, substraction, multiplication, division, square, square root, abs. value, reciprocal, inverse, common log,, natural log., derivative, integral, low pass, high pass, track unipolar + bipolar on period, frequency, pulse width, duty cycle)
Mask testing
Mask definitionelementary (tolerance mask around the signal)
History and segmented memory
Number of segmentsup to 34 952
Protocol trigger and decode
Supported protocolsI2C, SPI, UART/RS-232/RS-422/RS-485, CAN, LIN, I2S, MIL-STD-1553, ARINC429
Waveform generator
Resolution14-bit
Sample rate250 Msample/s
Amplitudehigh Z; 50 Ω20 mV to 5 V (Vpp); 10 mV to 2.5 V (Vpp)
DC offsethigh Z; 50 Ω±5 V; ±2.5 V
Arbitrarysampling rate; memory depthmax. 10 Msample/s; 32k points
Logic analyzer (MSO) functionality
Digital input channels16
MSO Memory depthtwo logic probes: 40 Msample for every channel
one logic probe: 80 Msample for every channel
MSO Bandwidth400 MHz (meas.)
MSO sampling rate2.5 Gsample/s
MSO input impedance100 kΩ ± 2 % || ~4 pF (meas.) at probe tips
Parallel busesup to 4
General data
DimensionsW × H × D390 mm × 220 mm × 152 mm
(15.4 in × 8.66 in × 5.98 in)
Weight3.3 kg (7.27 lb)
Display10.1' WXGA TFT color display (1280 × 800 pixel)
InterfacesUSB host with MTP, USB device, LAN, powerful web server for remote display and operation
Operating systemEmbedded

Available options

General
Product
Descrizione

Order Number 1335.8988.02

Descrizione

Mixed signal option, 400 MHz

The RTM-B1 MSO option is a powerful tool for debugging digital designs with a sampling rate of up to 5 GSa/s and a memory depth of up to 20 Msa.

R&S®RTM-B6

Order Number 1335.8994.02

Descrizione

Arbitrary waveform generator

Adds a 25 MHz signal generator and a 4-bit pattern generator to your R&S®RTM3000 oscilloscope.

Bandwidth upgrade
Product
Descrizione
R&S®RTM-B222

Order Number 1335.9003.02

Descrizione

Bandwidth upgrade of the R&S®RTM3002 to 200 MHz bandwidth

R&S®RTM-B223

Order Number 1335.9010.02

Descrizione

Bandwidth upgrade of the R&S®RTM3002 to 350 MHz bandwidth

R&S®RTM-B225

Order Number 1335.9026.02

Descrizione

Bandwidth upgrade of the R&S®RTM3002 to 500 MHz bandwidth

R&S®RTM-B2210

Order Number 1335.9032.02

Descrizione

Bandwidth upgrade of the R&S®RTM3002 to 1GHz bandwidth

R&S®RTM-B242

Order Number 1335.9049.02

Descrizione

Bandwidth upgrade of the R&S®RTM3004 to 200 MHz bandwidth

R&S®RTM-B243

Order Number 1335.9055.02

Descrizione

Bandwidth upgrade of the R&S®RTM3004 to 350 MHz bandwidth

R&S®RTM-B245

Order Number 1335.9061.02

Descrizione

Bandwidth upgrade of the R&S®RTM3004 to 500 MHz bandwidth

R&S®RTM-B2410

Order Number 1335.9078.02

Descrizione

Bandwidth upgrade of the R&S®RTM3004 to 1 GHz bandwidth

Serial triggering and decoding
Product
Descrizione

Order Number 1335.8807.02

Descrizione

I²C/SPI serial triggering and decoding

Triggering and decoding of I²C and 2-wire, 3-wire or 4-wire SPI buses

Order Number 1335.8813.02

Descrizione

UART/RS-232/RS-422/RS-485 serial triggering and decoding

Triggering and decoding of UART based protocols and RS-232, RS-422 as well as RS-485 buses

Order Number 1335.8820.02

Descrizione

CAN/LIN serial triggering and decoding

Triggering and decoding of CAN and LIN interfaces

Order Number 1335.8842.02

Descrizione

I²S/LJ/RJ/TDM triggering and decoding

Triggering and decoding of I²S buses

Order Number 1335.8859.02

Descrizione

MIL-1553 serial triggering and decoding

Triggering and decoding of MIL-STD-1553 buses

Order Number 1335.8865.02

Descrizione

ARINC 429 serial triggering and decoding

Triggering and decoding of ARINC 429 buses

General analysis
Product
Descrizione

Order Number 1335.8907.02

Descrizione

History and segmented memory

History and 400 Msample segmented memory.

Order Number 1335.8920.02

Descrizione

Power analysis

When analyzing power electronics, the input and output and the internal transfer function of the component have to be characterized. The power analysis option provides the necessary measurement functions, including inrush current, output spectrum and safe operating area (SOA).

Order Number 1335.9178.02

Descrizione

Frequency Response Analysis (Bode plot)

The R&S®RTM-K36 frequency response analysis (Bode plot) option lets you perform low-frequency response analysis on your oscilloscope easily and quickly. It characterizes the frequency response of a variety of electronic devices, including passive filters and amplifier circuits. For switch mode power supplies, it measures the control loop response and power supply rejection ratio.

Order Number 1335.9184.02

Descrizione

Spectrum analysis and spectrogram

The spectrum analysis option enhances the powerful FFT capability of R&S®RTM3000 oscilloscopes with spectrogram display

General accessories
Product
Descrizione
R&S®RTB-Z1

Order Number 1333.1728.02

Descrizione

Front cover

Protects the front of the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000

R&S®RTB-Z4

Order Number 1335.9290.02

Descrizione

Transit case with wheels for R&S®RTB

R&S®RTB-Z3

Order Number 1333.1734.02

Descrizione

Soft bag

Stores the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 oscilloscope and accessories

Order Number 1335.7875.02

Descrizione

Accessory case for probes and small parts for all Rohde and Schwarz oscilloscopes

R&S®ZZA-RTB2K

Order Number 1333.1711.02

Descrizione

19' rackmount adapter for R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 with 5HU

R&S®RT-Z2T

Order Number 1338.0007.02

Descrizione

Probe adapter

Enables Tek’s TekProbe-BNC level 2 probes to connect to Rohde & Schwarz probe interface

Passive probes
Product
Descrizione

Order Number 1333.2401.02

Descrizione

Passive probe, 500 MHz, 10:1

Order Number 1409.7550.00

Descrizione

Passive probe, 500 MHz, 10:1

Order Number 1333.1370.02

Descrizione

Passive probe, 38 MHz, 1:1

Active single-ended probes
Product
Descrizione

Order Number 1333.0815.02

Descrizione

Active single-ended probe, 1 GHz, BNC interface

Order Number 1418.7007.02

Descrizione

Active single-ended probe, 1 GHz, Rohde & Schwarz probe interface

Order Number 1410.4080.02

Descrizione

Active single-ended probe, 1 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

Order Number 1410.3502.02

Descrizione

Active single-ended probe, 1.5 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

Active differential probes
Product
Descrizione

Order Number 1333.0821.02

Descrizione

Active differential probe, 200 MHz, BNC interface

Order Number 1333.0838.02

Descrizione

Active differential probe, 800 GHz, BNC interface

Order Number 1410.4715.02

Descrizione

Active differential probe, 1 GHz, Rohde & Schwarz probe interface

Order Number 1410.4409.02

Descrizione

Active differential probe, 1.5 GHz, Rohde & Schwarz probe interface

Power rail probes
Product
Descrizione

Order Number 1800.5006.02

Descrizione

Power rail probe, 2 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface

2.0 GHz, 1:1, 50 kΩ, R&S probe interface

High voltage probes
Product
Descrizione

Order Number 1333.0873.02

Descrizione

250 MHz passive high voltage probe

Order Number 1409.7720.02

Descrizione

400 MHz passive high voltage probe

Order Number 1409.7737.02

Descrizione

400 MHz passive high voltage probe

Order Number 1337.9700.02

Descrizione

25 MHz High voltage differential probe

Order Number 1337.9800.02

Descrizione

25 MHz High voltage differential probe

Order Number 1422.0703.02

Descrizione

100 MHZ high voltage differential probe

Order Number 1800.2307.02

Descrizione

200 MHz High voltage differential probe

Order Number 1800.2107.02

Descrizione

100 MHz High voltage differential probe

Order Number 1800.2207.02

Descrizione

200 MHz High voltage differential probe

Order Number 1800.2007.02

Descrizione

100 MHz High voltage differential probe

Current probes
Product
Descrizione

Order Number 1333.0850.02

Descrizione

AC/DC 20 kHz current probe

Order Number 1333.0844.02

Descrizione

100 kHz current probe

Order Number 1409.8204.02

Descrizione

2 MHZ current probe

Order Number 1409.7750K02

Descrizione

10 MHZ current probe

Order Number 1409.8210.02

Descrizione

10 MHZ Current probe

Order Number 1409.8227.02

Descrizione

50 MHZ Current probe

Order Number 1409.7766K02

Descrizione

100 MHZ current probe

Order Number 1409.8233.02

Descrizione

100 MHZ current probe

Order Number 1801.4932.02

Descrizione

120 MHz current probe

Order Number 1409.7772K02

Descrizione

120 MHz current probe

EMC near-field probes
Product
Descrizione

Order Number 1147.2736.02

Descrizione

E and H near-field probe set

Logic probes
Product
Descrizione
R&S®RT-ZL04

Order Number 1333.0721.02

Descrizione

400 MHz logic probe

Probe accessories
Product
Descrizione

Order Number 1409.7789.02

Descrizione

Power supply for probes

Power supply for R&S®RT-ZC10/20/30 probes, +/-12V DC, +/-2.5A

Order Number 1410.4744.02

Descrizione

External attenuator

10:1, 2.0 GHz, 1.3 pF, 60 V DC, 42 V AC (peak) for R&S®RT-ZD20/30 probes. Included in R&S®RT-ZD10.

Application bundles
Product
Descrizione
R&S®RTM-PK1

Order Number 1335.8942.02

Descrizione

Application bundle (R&S®RTM-K1, -K2, -K3, -K5, -K6, -K7, -K15, -K31, -K36, -K37 and -B6)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTM-K1), UART/RS-232/RS-422/RS-485 (R&S®RTM-K2) and CAN/LIN (R&S®RTM-K3), I²S (R&S®RTM-K5), MIL-1553 (R&S®RTM-K6), ARINC429 (R&S®RTM-K7) history and segmented memory (R&S®RTM-K15), spectrum analysis and spectrogram (R&S®RTM-K37), power analysis (R&S®RTM-K31), frequency response analysis (R&S®RTM-K36), arbitrary generator (R&S®RTM-B6) for R&S®RTM3000 models

R&S®RTM-PK1US*

Order Number 1335.9190.02

Descrizione

Application bundle (R&S®RTM-K1, -K2, -K3, -K5, -K6, -K7, -K15, -K31, -K36, -K37 and -B6)

Application bundle contains triggering and decoding I²C/SPI (R&S®RTM-K1), UART/RS-232/RS-422/RS-485 (R&S®RTM-K2) and CAN/LIN (R&S®RTM-K3), I²S (R&S®RTM-K5), MIL-1553 (R&S®RTM-K6), ARINC429 (R&S®RTM-K7) history and segmented memory (R&S®RTM-K15), power analysis (R&S®RTM-K31), frequency response analysis (R&S®RTM-K36), spectrum analysis and spectrogram (R&S®RTM-K37), arbitrary generator (R&S®RTM-B6) for R&S®RTM3000 models * ONLY distributed in North America

Application packages
Product
Descrizione
R&S®RTM3K-LSSB

Order Number 1335.9149P02

Descrizione

Low-speed serial bus package (R&S®RTM3004, -K1, -K2, -K15, -B1)

Low-speed serial bus package, contains base unit of R&S®RTM3004, trigger and decoding I2C/SPI (R&S®RTM-K1), UART/RS-232/RS-422/RS-485 (R&S®RTM-K2), History and Segmented Memory (R&S®RTM-K15) and Mixed Signal Option (R&S®RTM-B1)

R&S®RTM3K-HVP4

Order Number 1335.9132P04

Descrizione

High voltage power package (R&S®RTM3004, R&S®RT-ZHD60)

High voltage power package, contains base unit of R&S®RTM3004 and high voltage differential probe R&S®RT-ZHD60

R&S®RTM3K-HVP2

Order Number 1335.9132P02

Descrizione

High voltage power package (R&S®RTM3002, R&S®RT-ZHD60)

High voltage power package, contains base unit of R&S®RTM3002 and high voltage differential probe R&S®RT-ZHD60

R&S®RTM3K-PS

Order Number 1335.9126P02

Descrizione

Power supply package (R&S®RTM3004, -K31, R&S®RT-ZHD07, R&S®RT-ZC15B)

Power supply package, contains base unit of R&S®RTM3004, Power Analysis Option (R&S®RTM-K31), high voltage differential probe R&S®RT-ZHD07, and current probe R&S®RT-ZC15B

R&S®RTM3000 - Media center

RTM 3000 - Elenco video
R&S®RTM3000 - Media center

Vedi di più

Video applicativi
Video applicativi degli oscilloscopi - Media Center

Vedi di più

Altri temi di interesse

10 anni di oscilloscopi Rohde & Schwarz

10 anni di innovazioni per gli oscilloscopi Rohde & Schwarz

Maggiori informazioni

Promozione sugli oscilloscopi

Promozione sugli oscilloscopi

Scegliete la promozione Rohde & Schwarz più adatta alle vostre esigenze e risparmiate

Maggiori informazioni

Webinar di Rohde & Schwarz

Webinar su oscilloscopi per applicazioni di elettronica di potenza e progettazione digitale

Maggiori informazioni

 Software per laboratori didattici multiutente

Software per laboratori didattici multiutente

Il software R&S®CDS campus dashboard semplifica l'insegnamento a gruppi di studenti in laboratori con banchi di lavoro multipli.

Informazioni sul prodotto

Richiedi informazioni

Hai qualche domanda o ti servono altre informazioni? Compila il modulo e ti ricontatteremo al più presto.

Desidero ricevere informazioni da Rohde & Schwarz tramite

Autorizzazione al marketing

Cosa significa nello specifico?

Accetto che ROHDE & SCHWARZ GmbH & Co. KG e l’entità ROHDE & SCHWARZ o l’azienda controllata riportata nelle note legali di questo sito web, potrà contattarmi tramite il canale prescelto (e-mail o posta) per scopi di marketing e pubblicità (ad es., informazioni su offerte speciali e sconti) in relazione a, in via non limitativa, prodotti e soluzioni del settore di collaudo e misurazione, comunicazioni sicure, monitoraggio e collaudo di rete, trasmissione, media e sicurezza informatica.

I tuoi diritti

La presente dichiarazione di consenso può essere revocata in qualsiasi momento inviando una e-mail con oggetto “Annulla iscrizione" all’indirizzo news@rohde-schwarz.com. In più, in ciascuna e-mail pubblicitaria inviata sarà allegato un link per annullare l’iscrizione. Nella ”Dichiarazione di riservatezza” vengono definiti ulteriori dettagli sull’utilizzo dei dati personali e sulla procedura di ritiro.

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.