R&S®RTB2000 oscilloscopes

R&S®RTB2000 oscilloscope
Ingrandisci immagine
R&S®RTB2000 oscilloscope, side view
Ingrandisci immagine
R&S®RTB2000 oscilloscope
Ingrandisci immagine
R&S®RTB2000 oscilloscope, rear view
Ingrandisci immagine
R&S®RTB2000 oscilloscope, front view
Ingrandisci immagine
R&S®RTB2000 oscilloscope, side view
Ingrandisci immagine
The oscilloscope R&S®RTB2000
Ingrandisci immagine
R&S®RTB2000 oscilloscope R&S®RTB2000 oscilloscope, side view R&S®RTB2000 oscilloscope R&S®RTB2000 oscilloscope, rear view R&S®RTB2000 oscilloscope, front view R&S®RTB2000 oscilloscope, side view The oscilloscope R&S®RTB2000

Key facts

  • Bandwidth: 70 MHz to 300 MHz
  • Sample rate: up to 2.5 Gsample/s
  • Memory depth: up to 20 Msample
  • ADC resolution: 10 bit
  • Display: 10.1" capacitive touchscreen

A partire da EUR 1.310

More signal details with the power of 10

Power of ten (10-bit ADC, 10 Msample memory and 10.1" touchscreen) combined with smart operating concepts make the R&S®RTB2000 oscilloscopes the perfect tool for university laboratories, for troubleshooting embedded designs during development and for production and service departments.

I    Four times more vertical resolution than standard 8-bit ADCs.
I    Maintains fast sampling rates at all times
I    Largest display with highest resolution in its class

Features & benefits

Signal analysis: quick results

See small signal details in the presence of large signals

The R&S®RTB2000 features a customized Rohde & Schwarz engineered 10-bit A/D converter that delivers a fourfold improvement compared to conventional 8-bit A/D converters. The increased resolution results in sharper waveforms with more signal details that would otherwise be missed. One example is the characterization of switched-mode power supplies. The voltages across the switching device must be determined during the on/off times within the same acquisition.

RTB2000 Oscilloscope
Open Lightbox

10-bit A/D converter

The Rohde & Schwarz designed 10-bit A/D converter ensures highest signal fidelity at highest resolution.

Capture more time at full bandwidth

10 Msample standard and 20 Msample interleaved

The R&S®RTB2000 offers a class-leading memory depth: 10 Msample per channel are available, even 20 Msample in interleaved mode. This is 10 times more than similar oscilloscopes in the same instrument class. The user captures longer acquisition sequences even at high sampling rates, e.g. when analyzing transients of switched-mode power supplies, and thus benefits from more detailed analysis results.

RTB2000 Oscilloscope
Open Lightbox

10 Msample standard memory

Capture and analyze pulsed and burst signals over a long period with up to 20 Msample standard acquisition memory.

Segmented memory

160 Msample with history function

The R&S®RTB-K15 option with deep, segmented memory analyzes signal sequences over a long observation period. Protocol-based signals with communications gaps such as I²C or SPI can be captured over several seconds or minutes. Thanks to the variable segment size, the 160 Msample memory is optimally utilized. In history mode, previous acquisitions to the maximum segmented memory depth of 160 Msample are available for further analysis.

RTB2000 Oscilloscope
Open Lightbox

160 Msample segmented memory

Capture the longest time periods with class-leading 160 Msample memory.

Logic analysis with the MSO option

16 additional digital channels

The R&S®RTB-B1 option turns every R&S®RTB2000 into an intuitive-to-use MSO with 16 additional digital channels. The oscilloscope captures and analyzes signals from analog and digital components of an embedded design – synchronously and time-correlated to each other. For example, the delay between input and output of an A/D converter can conveniently be determined using the cursor measurements.

Open Lightbox

Four-bit DAC signal change.

The R&S®RTB2000 captures and analyzes analog and digital signals synchronously and in time-correlated to each other.

Waveform and pattern generator

Generate analog and digital stimuli

The R&S®RTB-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. Apart from the common sine, square/pulse, ramp and noise waveforms, it outputs arbitrary waveforms and 4-bit signal patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. Predefined patterns for e.g. I2C, SPI, UART and CAN/LIN can be used.

Open Lightbox

Waveform and pattern generator

In addition to common sine, square/pulse, ramp and noise waveforms, it outputs user-defined waveforms and 4-bit signal patterns.

Digital voltmeter

Measure and display electrical potential

The R&S®RTB2000 features a 3-digit voltmeter (DVM) and 6-digit frequency counter on each channel for simultaneous measurements. Measurement functions include DC, AC+DC (RMS) and AC (RMS) – included as standard.

RTB2000 Oscilloscope
Open Lightbox

Digital voltmeter

The 3-digit voltmeter measures and displays the electrical potential difference between two points in an electric circuit.

Frequency analysis mode

Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S®RTB2000 is activated at the push of a button and by simpling entering the center frequency and span. Thanks to the R&S®RTB2000 oscilloscopes’ high-performance FFT functionality, signals can be analyzed with up to 128 kpoints. Other practical tools include cursor measurements and autoset in frequency domain.

Open Lightbox

Frequency analysis mode

The high-performance FFT functionality analyzes signals up to 128 kpoints.

Mask test mode

Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. By using statistical pass/fail evaluation, they assess quality and stability of a DUT. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation can generate a pulse output at the AUX-OUT connector on the R&S®RTB2000. This pulse output can be used to trigger actions in the measurement setup.

RTB2000 Oscilloscope
Open Lightbox

Mask test with result statistics

The pass/fail evaluation assesses the quality and stability of the DUT.

Ready for the teaching lab

In the teaching lab, the R&S®RTB2000 oscilloscope is the perfect choice to teach students how to measure with an oscilloscope. It has an easy-to-use concept combined with state-of-the-art technology – at an affordable price. The large 10.1" high-resolution screen shows every signal detail, and one instrument can be shared among several students. Reports can be efficiently created with the handy and flexible screen annotation tool.

RTB2000 Oscilloscope
Open Lightbox

Ready for the teaching lab

Perfect instruments for everyday use at universities and colleges thanks to diverse functionality, rugged design and small footprint.

Available models
Product Name
Bandwidth
Channels
Sample Rate
Max. Memory Depth
Optional MSO
Starting at
R&S®RTB2002

Order number 1333.1005.02

Bandwidth
70 MHz
Channels
2
Sample Rate
2.5 Gsample/s
Max. Memory Depth
20 Msample
Optional MSO
16 digital channels
Starting at
R&S®RTB2004

Order number 1333.1005.04

Bandwidth
70 MHz
Channels
4
Sample Rate
2.5 Gsample/s
Max. Memory Depth
20 Msample
Optional MSO
16 digital channels
Starting at
R&S®RTB2002 + RTB-B221

Order number 1333.1005P12

Bandwidth
100 MHz
Channels
2
Sample Rate
2.5 Gsample/s
Max. Memory Depth
20 Msample
Optional MSO
16 digital channels
Starting at
R&S®RTB2004 + RTB-B241

Order number 1333.1005P14

Bandwidth
100 MHz
Channels
4
Sample Rate
2.5 Gsample/s
Max. Memory Depth
20 Msample
Optional MSO
16 digital channels
Starting at
R&S®RTB2002 + RTB-B222

Order number 1333.1005P22

Bandwidth
200 MHz
Channels
2
Sample Rate
2.5 Gsample/s
Max. Memory Depth
20 Msample
Optional MSO
16 digital channels
Starting at
R&S®RTB2004 + RTB-B242

Order number 1333.1005P24

Bandwidth
200 MHz
Channels
4
Sample Rate
2.5 Gsample/s
Max. Memory Depth
20 Msample
Optional MSO
16 digital channels
Starting at
R&S®RTB2002 + RTB-B223

Order number 1333.1005P32

Bandwidth
300 MHz
Channels
2
Sample Rate
2.5 Gsample/s
Max. Memory Depth
20 Msample
Optional MSO
16 digital channels
Starting at
R&S®RTB2004 + RTB-B243

Order number 1333.1005P34

Bandwidth
300 MHz
Channels
4
Sample Rate
2.5 Gsample/s
Max. Memory Depth
20 Msample
Optional MSO
16 digital channels
Starting at
Specifications
Vertical system
Number of channels R&S®RTB2002 ; R&S®RTB2004 2; 4
Bandwidth (–3 dB) R&S®RTB2002/2004 (with R&S®RTB-B2x1, R&S®RTB-B2x2 and R&S®RTB-B2x3 options) 70 MHz, 100 MHz, 200 MHz, 300 MHz
Rise time (calculated) R&S®RTB2002/2004 (with R&S®RTB-B2x1, R&S®RTB-B2x2 and R&S®RTB-B2x3 options) 5 ns, 3.5 ns, 1.75 ns, 1.15 ns
Input impedance   1 MΩ ± 2% with 19 pF ± 2 pF (meas.)
input sensitivity max. bandwidth in all ranges 1 mV/div to 5 V/div
DC gain accuracy offset and position = 0, maximum operating temperature change of ±5°C after self-alignment
  input sensitivity > 5 mV/div ± 1.5% of full scale
  input sensitivity ≤ 5 mV/div ± 2% of full scale
ADC resolution   10-bit, up to 16-bit with high resolution decimation
Acquisition system
Maximum realtime sampling rate   1.25 Gsample/s; 2.5 Gsample/s, interleaved
Acquisition memory standard; with R&S®RTB-K15 option 10 Msample; 20 Msample, interleaved;
160 Msample segmented memory
Horizontal system
Timebase range   selectable between 1 ns/div and 500 s/div
Trigger system
Trigger types standard edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus
  option I2C, SPI, UART/RS-232/RS-422/RS-485, CAN/LIN
Analysis and measurement functions
QuickMeas at the push of a button, measurement values are continuously written onto the waveform peak-to-peak voltage, pos. peak, neg. peak, rise time, falltime, mean value, RMS value, time, period, frequency
Waveform mathematics   addition, subtraction, multiplication, division, FFT
MSO option
Digital channels   16 (2 logic probes)
Sampling rate   1.25 Gsample/s
Acquisition memory   10 Msample
Waveform generator
Resolution, sample rate   14-bit, 250 Msample/s
Amplitude high-Z; 50 Ω 20 mV to 5 V (Vpp); 10 mV to 2.5 V (Vpp)
DC offset high-Z; 50 Ω ±2.5 V; ±1.25 V
Signal forms frequency ranges sine 0.1 Hz to 25 MHz
  pulse/rectangle 0.1 Hz to 10 MHz
  ramp/triangle 0.1 Hz to 1 MHz
  noise max. 25 MHz
Arbitrary sampling rate; memory depth max. 10 Msample/s; 16k point
General data
Screen   10.1" WXGA TFT color display (1280 × 800 pixel)
Interfaces   USB host with MTP, USB device, LAN, powerful web server for remote display and operation
Audible noise maximum sound pressure level at a distance of 1.0 m 28.3 dB(A)
Dimensions W × H × D 390  mm × 220 mm × 152 mm
(15.4 in × 8.66 in × 5.98 in)
Weight   2.5 kg (5.5 lb)

Available options

General
Product
Description
RTB-B1 Mixed Signal Upgrade for non-MSO models

Order number 1333.1105.02

Description
Mixed signal upgrade for non-MSO models, 300 MHz
Turns the R&S®RTB2000 oscilloscope into fast, precise and easy-to-use mixed signal oscilloscopes (MSO).
RTB-B6 Arbitrary Waveform Generator
R&S®RTB-B6

Order number 1333.1111.02

Description
Arbitrary waveform generator
Adds an 25 MHz signal generator and a 4-bit pattern generator to your R&S®RTB2000 oscilloscope
Bandwidth upgrade
Product
Description
Bandwidth.svg
R&S®RTB-B221

Order number 1333.1163.02

Description
Bandwidth upgrade of the R&S®RTB2002 to 100 MHz bandwidth
Bandwidth.svg
R&S®RTB-B222

Order number 1333.1170.02

Description
Bandwidth upgrade of the R&S®RTB2002 to 200 MHz bandwidth
Bandwidth.svg
R&S®RTB-B223

Order number 1333.1186.02

Description
Bandwidth upgrade of the R&S®RTB2002 to 300 MHz bandwidth
Bandwidth.svg
R&S®RTB-B241

Order number 1333.1257.02

Description
Bandwidth upgrade of the R&S®RTB2004 to 100 MHz bandwidth
Bandwidth.svg
R&S®RTB-B242

Order number 1333.1263.02

Description
Bandwidth upgrade of the R&S®RTB2004 to 200 MHz bandwidth
Bandwidth.svg
R&S®RTB-B243

Order number 1333.1270.02

Description
Bandwidth upgrade of the R&S®RTB2004 to 300 MHz bandwidth
Serial triggering and decoding
Product
Description
Digital-Oscilloscope-Software-Triggering-and-Decoding-RTx-K1.jpg

Order number 1333.1011.02

Description
I²C/SPI serial triggering and decoding
Triggering and decoding of I²C and 2-wire, 3-wire or 4-wire SPI buses
Oscilloscope-Software-Serial-Triggering-and-Decoding-RTx-K2_UARTRS-232RS-422RS-485_uart.jpg

Order number 1333.1028.02

Description
UART/RS-232/RS-422/RS-485 serial triggering
Triggering and decoding of UART based protocols and RS-232, RS-422 as well as RS-485 buses
RTB-K3 CAN/LIN Serial Triggering and Decoding

Order number 1333.1034.02

Description
CAN/LIN serial triggering and decoding
Triggering and decoding of CAN and LIN interfaces
General analysis
Product
Description
History and Segmented Memory

Order number 1333.1040.02

Description
History and segmented memory
History and 160 Msample segmented memory
Oscilloscope-Software-RTx-K36-Frequency-Response-Analysis-Bode-plot.png

Order number 1335.8007.02

Description
Frequency Response Analysis (Bode plot)
The R&S®RTB-K36 frequency response analysis (Bode plot) option lets you perform low-frequency response analysis on your oscilloscope easily and quickly. It characterizes the frequency response of a variety of electronic devices, including passive filters and amplifier circuits. For switch mode power supplies, it measures the control loop response and power supply rejection ratio.
General accessories
Product
Description
Front Cover
R&S®RTB-Z1

Order number 1333.1728.02

Description
Front cover
Protects the front of the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000
Transit-Case
R&S®RTB-Z4

Order number 1335.9290.02

Description
Transit case with wheels for R&S®RTB
Soft Bag
R&S®RTB-Z3

Order number 1333.1734.02

Description
Soft bag
Stores the R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 oscilloscope and accessories
ZZA-RTB2K
R&S®ZZA-RTB2K

Order number 1333.1711.02

Description
19" rackmount adapter for R&S®RTB2000, R&S®RTM3000 or R&S®RTA4000 with 5HU
RT-ZA19 Accessory case
R&S®RT-ZA19

Order number 1335.7875.02

Description
Accessory case for probes and small parts for all Rohde and Schwarz oscilloscopes
Passive probes
Product
Description
RT-ZP03 Passive probe

Order number 3622.2817.02

Description
Passive probe, 300 MHz, 10:1/1.1
RT-ZP05 Passive probe

Order number 3623.2927.02

Description
Passive probe
500 MHz, passive, 10:1, 10 MΩ, 5 mm tip
 RT-ZP10 Passive probe

Order number 1409.7550.00

Description
Passive probe, 500 MHz, 10:1
RT-ZP1x Passive probe

Order number 1333.1370.02

Description
Passive probe, 38 MHz, 1:1
Active differential probes
Product
Description
RT-ZD01 High voltage probe

Order number 1422.0703.02

Description
100 MHz high voltage differential probe
RT-ZD02 Active differential probe, 200 MHz, BNC interface

Order number 1333.0821.02

Description
Active differential probe, 200 MHz, BNC interface
High voltage probes
Product
Description
RT-ZH03 - 250 MHz Passive high voltage probe

Order number 1333.0873.02

Description
250 MHz passive high voltage probe
RT-ZH10 High voltage probe

Order number 1409.7720.02

Description
400 MHz passive high voltage probe
RTZH10_front.jpg

Order number 1409.7737.02

Description
400 MHz passive high voltage probe
Logic probes
Product
Description
RT-ZL03 300 MHz logic probe, 8 channels
R&S®RT-ZL03

Order number 1333.0715.02

Description
300 MHz logic probe, 8 channels
Probe accessories
Product
Description
RT-ZC02 AC/DC 20 KHZ Current probe

Order number 1333.0850.02

Description
AC/DC 20 kHz current probe
RT-ZC03 100 KHZ Current probe

Order number 1333.0844.02

Description
100 kHz current probe
RT-ZC10 10 MHz Current probe

Order number 1409.7750K02

Description
10 MHz current probe
RT-ZC20 20 MHz Current probe

Order number 1409.7766K02

Description
100 MHz current probe
RT-ZC30 120 MHz Current probe

Order number 1409.7772K02

Description
120 MHz current probe
R&S®RT-ZC31

Order number 1801.4932.02

Description
120 MHz current probe
RT-ZA13 Power supply for probes
R&S®RT-ZA13

Order number 1409.7789.02

Description
Power supply for probes
Power supply for R&S®RT-ZC10/20/30 probes, +/-12V DC, +/-2.5A
Application bundles
Product
Description
Application bundle
R&S®RTB-PK1

Order number 1333.1092.02

Description
Application bundle (R&S®RTB-K1, -K2, -K3, -K15, -K36 and -B6)
Application bundle contains triggering and decoding I²C/SPI (R&S®RTB-K1), UART/RS-232/RS-422/RS-485 (R&S®RTB-K2) and CAN/LIN (R&S®RTB-K3), history and segmented memory (R&S®RTB-K15), frequency response analysis (R&S®RTB-K36), arbitrary generator (R&S®RTB-B6) for R&S®RTB2000 models

R&S®RTB2000 - Media center

RTB2000 - 10 bit ADC
10 bit ADC to see small signal details in the presence of large signals
RTB2000 - 10 Msample memory
10 Msample memory to capture more time at full bandwidth
RTB2000 - high-resolution capacitive touchscreen
10.1" high-resolution capacitive touchscreen with gesture support

Altri temi di interesse

10 anni di innovazioni per gli oscilloscopi Rohde & Schwarz

Maggiori informazioni

Comprensione delle sonde passive dell’oscilloscopio

Sarà possibile apprendere il funzionamento di base dell’oscilloscopio, delle sonde e delle varie applicazioni relative all’oscilloscopio che aiutano a ottimizzare i risultati di misura.

Maggiori informazioni

Promozione sugli oscilloscopi

Scegliete la promozione Rohde & Schwarz più adatta alle vostre esigenze e risparmiate

Maggiori informazioni

Webinar su oscilloscopi per applicazioni di elettronica di potenza e progettazione digitale

Maggiori informazioni

Fino al 50% di risparmio in più sugli oscilloscopi Rohde & Schwarz per i clienti nel settore della didattica

Maggiori informazioni

Soluzione per

Famiglie di oscilloscopi

Software per oscilloscopi

Espandi le capacità del tuo oscilloscopio con il software applicativo Rohde & Schwarz.

Maggiori informazioni

Sonde per oscilloscopi

Personalizza il tuo oscilloscopio con le sonde e gli accessori più adatti per la tua applicazione.

Maggiori informazioni

Richiedi informazioni

Hai qualche domanda o ti servono altre informazioni? Compila il modulo e ti ricontatteremo al più presto.

Desidero ricevere informazioni da Rohde & Schwarz tramite

Autorizzazione al marketing

Cosa significa nello specifico?

Accetto che ROHDE & SCHWARZ GmbH & Co. KG e l’entità ROHDE & SCHWARZ o l’azienda controllata riportata nelle note legali di questo sito web, potrà contattarmi tramite il canale prescelto (e-mail o posta) per scopi di marketing e pubblicità (ad es., informazioni su offerte speciali e sconti) in relazione a, in via non limitativa, prodotti e soluzioni del settore di collaudo e misurazione, comunicazioni sicure, monitoraggio e collaudo di rete, trasmissione, media e sicurezza informatica.

I tuoi diritti

La presente dichiarazione di consenso può essere revocata in qualsiasi momento inviando una e-mail con oggetto “Annulla iscrizione" all’indirizzo news@rohde-schwarz.com. In più, in ciascuna e-mail pubblicitaria inviata sarà allegato un link per annullare l’iscrizione. Nella ”Dichiarazione di riservatezza” vengono definiti ulteriori dettagli sull’utilizzo dei dati personali e sulla procedura di ritiro.

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.