R&S®SMM100A vector signal generator

Redefining midrange

R&S®SMM100A vector signal generator
Ingrandisci immagine
R&S®SMM100A vector signal generator
Ingrandisci immagine
R&S®SMM100A vector signal generator
Ingrandisci immagine
R&S®SMM100A vector signal generator
Ingrandisci immagine
R&S®SMM100A vector signal generator
Ingrandisci immagine
R&S®SMM100A vector signal generator R&S®SMM100A vector signal generator R&S®SMM100A vector signal generator R&S®SMM100A vector signal generator R&S®SMM100A vector signal generator

Key facts

  • Frequency range from 100 kHz to 44 GHz
  • Internal RF modulation bandwidth up to 1 GHz
  • Excellent modulation frequency response, EVM and ACPR
  • 5G NR signal generation for FR1 and FR2
  • Ready for future WLAN requirements for frequency and bandwidth

Midrange vector signal generator with mmWave testing capabilities

The R&S®SMM100A vector signal generator provides remarkably good RF characteristics across the entire frequency range from 100 kHz to 44 GHz. The instrument covers the bands below 6 GHz used by existing wireless
standards as well as the newly defined bands for 5G NR FR1 and Wi-Fi 6E up to 7.125 GHz and the 5G NR FR2 bands up to 44 GHz.

The internal baseband generator in the R&S®SMM100A supports a maximum RF modulation bandwidth of 1 GHz.
Digitally modulated broadband signals can thus be generated as required by the prevalent wireless standards. The R&S®SMM100A is well prepared for future bandwidth requirements.

Features & benefits

Excellent SSB phase noise and EVM performance

For the R&S®SMM100A vector signal generator, SSB phase noise of < –129 dBc is specified at an RF frequency of 1 GHz with a 20 kHz offset. The typical value of –134 dBc is even 5 dB lower.

Beside its excellent RF performance, it also exhibits outstanding modulation characteristics at higher frequencies. For example, the R&S®SMM100A delivers impressive EVM performance of < –42 dB (0.8 %) at an RF frequency of 28 GHz for a 100 MHz 5G NR signal in accordance with 3GPP test model 3.1.

Measured EVM performance
Open Lightbox

Measured EVM performance

Measured EVM for a 100 MHz 5G NR signal, 3GPP TM 3.1, 28 GHz carrier frequency

Extremely flat frequency response

The frequency response of a signal within the modulation bandwidth also has a major influence on the achievable EVM performance. It is thus essential to minimize this parameter in magnitude and phase across the entire RF frequency range of the generator. 

Intelligent compensation is provided for internal influences of the R&S®SMM100A on the frequency response. The R&S®SMM100A thus attains a measured magnitude frequency response of < 0.4 dB over the entire RF modulation
bandwidth of 1 GHz.

Measured I/Q modulation frequency response
Open Lightbox

Measured I/Q modulation frequency response

Discover scalability

In the basic configuration, the R&S®SMM100A supports a maximum RF modulation bandwidth of 120 MHz. Depending on the requirements, this can be extended up to 1 GHz by installing a license key. With similar flexibility, the ARB memory can be extended from 64 Msample up to a maximum of 2 Gsample. 

Additionally the R&S®SMM100A is available with various frequency options up to a maximum frequency of 44 GHz. This allows users to precisely configure the R&S®SMM100A to meet their actual requirements.

Overview of important software and hardware options
Open Lightbox

Overview of important software and hardware options

Discover usability

  • Convenient operation via 8.4" touchscreen
  • Structured and intuitive user interface presented in the form of a block diagram
  • Graphical signal monitoring in real time at different points within the overall signal flow path
  • Automation made easy with context-sensitive help system and built-in SCPI macro recorder with code generator
Graphical signal monitoring in real time
Open Lightbox

Graphical signal monitoring in real time

Mobile communications standards

The R&S®SMM100A is well suited for generation of signals in compliance with the most important wireless communications standards and is the perfect signal generator for 5G NR base station conformance testing.

When equipped with the R&S®SMM-B1044 frequency option, the instrument covers 5G NR frequency ranges FR1 up to 7.125 GHz and FR2 up to 44 GHz. Together with the bandwidth extension to 1 GHz, the instrument can handle the increased requirements for signal bandwidth in 5G applications.

Test case wizard for 5G New radio
Open Lightbox

Test case wizard for 5G New radio

The 5G NR test case wizard allows the R&S®SMM100A to be conveniently and cleverly configured for BTS tests in line with 3GPP TS 38.141.

Ready for the next Wi-Fi generations

WLAN is also following the trend toward higher frequencies and larger bandwidths. For Wi-Fi 6E, the frequency range between 5.8 GHz and 7.125 GHz will be used. For future WLAN standards such as IEEE 802.11be, a signal bandwidth of 320 MHz has already been specified.

With the R&S®SMM-B1007 frequency option up to 7.5 GHz and the R&S®SMM-K524 bandwidth extension to 500 MHz, the R&S®SMM100A is the ideal signal  generator for WLAN testing of components, modules and devices.

EVM measurement of a IEEE 802.11ac WLAN signal
Open Lightbox

EVM measurement of a IEEE 802.11ac WLAN signal

High rate pulse (HRP) ultrawideband (UWB)

The R&S®SMM100A is ideally suited for HRP UWB receiver testing. The instrument covers the frequency range up to 10.6 GHz and with the RF modulation badwidth of 500 MHz, signals can be generated on the most important channels.

The R&S®SMM-K149 HRP UWB baseband option supports signal generation for the three specified modes: HRP UWB from IEEE 802.15.4a-2015 as well as the BPRF mode and the HPRF mode for enhanced ranging devices (ERDEF) from IEEE 802.15.4z.

HRP UWB signal generation with R&amp;S®SMM-K149 option
Open Lightbox

HRP UWB signal generation with R&S®SMM-K149 option

Available options

Frequency options
Product Description

R&S®SMM-B1006

Order number 1440.9009.02

Description

100 kHz to 6 GHz

R&S®SMM-B1007

Order number 1440.9109.02

Description

100 kHz to 7.5 GHz

R&S®SMM-B1012

Order number 1440.9209.02

Description

100 kHz to 12.75 GHz

R&S®SMM-B1020

Order number 1440.9309.02

Description

100 kHz to 20 GHz

R&S®SMM-B1031

Order number 1440.9409.02

Description

100 kHz to 31.8 GHz

R&S®SMM-B1044

Order number 1440.9509.02

Description

100 kHz to 44 GHz

R&S®SMM-B1044N

Order number 1440.9609.02

Description

100 kHz to 44 GHz I/Q modulation bandwidth and minimum pulse width limited

Reference oscillator options
Product Description

R&S®SMM-K703

Order number 1441.1301.02

Description

100 MHz, 1 GHz ultra low noise reference input/output

R&S®SMM-K704

Order number 1441.1318.02

Description

Flexible reference input (1 MHz to 100 MHz)

Analog modulation options
Product Description

R&S®SMM-K22

Order number 1441.1330.02

Description

Pulse Modulator

R&S®SMM-K23

Order number 1441.1347.02

Description

High-Performance Pulse Generator

R&S®SMM-K24

Order number 1441.1353.02

Description

Multifunction Generator

R&S®SMM-K720

Order number 1441.1324.02

Description

AM/FM/PM

Other options
Product Description

R&S®SMM-B90

Order number 1440.9709.02

Description

Phase Coherence

Baseband
Product Description

R&S®SMM-B9

Order number 1440.9809.02

Description

Baseband generator with ARB (64 Msample, 120 MHz RF bandwidth)

R&S®SMM-K17

Order number 1441.2143.02

Description

Differential analog I/Q outputs

R&S®SMM-K511

Order number 1441.1260.02

Description

ARB memory extension to 512 Msample

R&S®SMM-K512

Order number 1441.1276.02

Description

ARB memory extension to 1 Gsample

R&S®SMM-K513

Order number 1441.2120.02

Description

ARB memory extension to 2 Gsample

R&S®SMM-K520

Order number 1441.2114.02

Description

Baseband real-time extension

R&S®SMM-K523

Order number 1441.2108.02

Description

Baseband extension to 240 MHz RF bandwidth

R&S®SMM-K524

Order number 1441.2095.02

Description

Baseband extension to 500 MHz RF bandwidth

R&S®SMM-K525

Order number 1441.2089.02

Description

Baseband extension to 1 GHz RF bandwidth

Baseband enhancements
Product Description

R&S®SMM-K62

Order number 1441.2072.02

Description

Additive white Gaussian noise (AWGN)

R&S®SMM-K80

Order number 1441.2066.02

Description

Bit error rate tester

R&S®SMM-K540

Order number 1441.2050.02

Description

Envelope tracking

R&S®SMM-K541

Order number 1441.2043.02

Description

AM/AM, AM/PM predistortion

R&S®SMM-K544

Order number 1441.2037.02

Description

User-defined frequency response correction

R&S®SMM-K548

Order number 1441.1130.02

Description

Crest factor reduction

R&S®SMM-K262

Order number 1441.1576.02

Description

Additive white Gaussian noise (AWGN) (WinIQSIM2™)

5G NR
Product Description

R&S®SMM-K144

Order number 1441.1730.02

Description

5G NR Release 15

R&S®SMM-K148

Order number 1441.2166.02

Description

5G NR Release 16

R&S®SMM-K444

Order number 1441.1360.02

Description

5G NR Release 15 (WinIQSIM2™)

R&S®SMM-K448

Order number 1441.2172.02

Description

5G NR Release 16 (WinIQSIM2™)

LTE
Product Description

R&S®SMM-K55

Order number 1441.1924.02

Description

LTE Release 8

R&S®SMM-K84

Order number 1441.1882.02

Description

LTE Release 9

R&S®SMM-K85

Order number 1441.1876.02

Description

LTE Release 10

R&S®SMM-K112

Order number 1441.1847.02

Description

LTE Release 11

R&S®SMM-K113

Order number 1441.1830.02

Description

LTE Release 12

R&S®SMM-K119

Order number 1441.1776.02

Description

LTE Release 13/14/15

R&S®SMM-K115

Order number 1441.1818.02

Description

Cellular IoT Release 13

R&S®SMM-K143

Order number 1441.1747.02

Description

Cellular IoT Release 14

R&S®SMM-K146

Order number 1441.1247.02

Description

Cellular IoT Release 15

R&S®SMM-K255

Order number 1441.1601.02

Description

LTE Release 8 (WinIQSIM2™)

R&S®SMM-K284

Order number 1441.1530.02

Description

LTE Release 9 (WinIQSIM2™)

R&S®SMM-K285

Order number 1441.1524.02

Description

LTE Release 10 (WinIQSIM2™)

R&S®SMM-K412

Order number 1441.1453.02

Description

LTE Release 11 (WinIQSIM2™)

R&S®SMM-K413

Order number 1441.1447.02

Description

LTE Release 12 (WinIQSIM2™)

R&S®SMM-K419

Order number 1441.1382.02

Description

LTE Release 13/14/15 (WinIQSIM2™)

R&S®SMM-K415

Order number 1441.1424.02

Description

Cellular IoT Release 13 (WinIQSIM2™)

R&S®SMM-K443

Order number 1441.1253.02

Description

Cellular IoT Release 14 (WinIQSIM2™)

R&S®SMM-K446

Order number 1441.1230.02

Description

Cellular IoT Release 15 (WinIQSIM2™)

W-CDMA/HSPA
Product Description

R&S®SMM-K42

Order number 1441.2008.02

Description

3GPP FDD

R&S®SMM-K83

Order number 1441.1899.02

Description

3GPP FDD HSPA/HSPA+, enhanced BS/MS tests

R&S®SMM-K242

Order number 1441.1701.02

Description

3GPP FDD (WinIQSIM2™)

R&S®SMM-K283

Order number 1441.1547.02

Description

3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)

GSM/EDGE
Product Description

R&S®SMM-K40

Order number 1441.2020.02

Description

GSM/EDGE

R&S®SMM-K41

Order number 1441.2014.02

Description

EDGE Evolution

R&S®SMM-K240

Order number 1441.1724.02

Description

GSM/EDGE (WinIQSIM2™)

R&S®SMM-K241

Order number 1441.1718.02

Description

EDGE Evolution (WinIQSIM2™)

CDMA2000®
Product Description

R&S®SMM-K46

Order number 1441.1999.02

Description

CDMA2000® inkl. 1xEV-DV

R&S®SMM-K47

Order number 1441.1982.02

Description

1xEV-DO Rev. A

R&S®SMM-K87

Order number 1441.1853.02

Description

1xEV-DO Rev. B

R&S®SMM-K246

Order number 1441.1682.02

Description

CDMA2000® inkl. 1xEV-DV (WinIQSIM2™)

R&S®SMM-K247

Order number 1441.1676.02

Description

1xEV-DO Rev. A (WinIQSIM2™)

R&S®SMM-K287

Order number 1441.1501.02

Description

1xEV-DO Rev. B (WinIQSIM2™)

TD-SCDMA
Product Description

R&S®SMM-K50

Order number 1441.1960.02

Description

TD-SCDMA

R&S®SMM-K51

Order number 1441.1953.02

Description

TD-SCDMA enhanced BS/MS tests

R&S®SMM-K250

Order number 1441.1653.02

Description

TD-SCDMA (WinIQSIM2™)

R&S®SMM-K251

Order number 1441.1647.02

Description

TD-SCDMA enhanced BS/MS tests (WinIQSIM2™)

WLAN
Product Description

R&S®SMM-K54

Order number 1441.1930.02

Description

IEEE 802.11a/b/g/n/j/p

R&S®SMM-K86

Order number 1441.1860.02

Description

IEEE 802.11ac

R&S®SMM-K142

Order number 1441.1753.02

Description

IEEE 802.11ax

R&S®SMM-K254

Order number 1441.1618.02

Description

IEEE 802.11a/b/g/n/j/p (WinIQSIM2™)

R&S®SMM-K286

Order number 1441.1518.02

Description

IEEE 802.11ac (WinIQSIM2™)

R&S®SMM-K442

Order number 1441.1376.02

Description

IEEE 802.11ax (WinIQSIM2™)

IoT
Product Description

R&S®SMM-K60

Order number 1441.1918.02

Description

Bluetooth® EDR

R&S®SMM-K117

Order number 1441.1799.02

Description

Bluetooth® 5.x

R&S®SMM-K89

Order number 1441.1160.02

Description

NFC A/B/F

R&S®SMM-K131

Order number 1441.1760.02

Description

LoRa®

R&S®SMM-K149

Order number 1441.1099.02

Description

HRP UWB

R&S®SMM-K260

Order number 1441.1599.02

Description

Bluetooth® EDR (WinIQSIM2™)

R&S®SMM-K417

Order number 1441.1401.02

Description

Bluetooth® 5.x (WinIQSIM2™)

R&S®SMM-K289

Order number 1441.1499.02

Description

NFC A/B/F WinIQSIM2™)

R&S®SMM-K431

Order number 1441.1182.02

Description

LoRa® (WinIQSIM2™)

R&S®SMM-K449

Order number 1441.1101.02

Description

HRP UWB (WinIQSIM2™)

GNSS
Product Description

R&S®SMM-K244

Order number 1441.1699.02

Description

GPS, 1 satellite (WinIQSIM2™)

R&S®SMM-K298

Order number 1441.1476.02

Description

Modernized GPS, 1 satellite (WinIQSIM2™)

R&S®SMM-K266

Order number 1441.1560.02

Description

Galileo, 1 satellite (WinIQSIM2™)

R&S®SMM-K294

Order number 1441.1482.02

Description

GLONASS, 1 satellite (WinIQSIM2™)

R&S®SMM-K297

Order number 1441.1199.02

Description

IRNSS, 1 satellite (WinIQSIM2™)

R&S®SMM-K407

Order number 1441.1460.02

Description

BeiDou 1 satellite (WinIQSIM2™)

R&S®SMM-K432

Order number 1441.1176.02

Description

Modernized BeiDou, 1 satellite (WinIQSIM2™)

Broadcast
Product Description

R&S®SMM-K252

Order number 1441.1630.02

Description

DVB-H/DVB-T (WinIQSIM2™)

R&S®SMM-K416

Order number 1441.1418.02

Description

DVB-S2 / DVB-S2X (WinIQSIM2™)

R&S®SMM-K253

Order number 1441.1624.02

Description

DAB/T-DMB (WinIQSIM2™)

Waveform package
Product Description

R&S®SMM-K200

Order number 1441.1124.71

Description

1 waveform for signals from R&S®WinIQSIM2™

R&S®SMM-K200

Order number 1441.1124.72

Description

5 waveform for signals from R&S®WinIQSIM2™

R&S®SMM-K200

Order number 1441.1124.75

Description

50 waveform for signals from R&S®WinIQSIM2™

Other options
Product Description

R&S®SMM-K61

Order number 1441.1901.02

Description

Multicarrier CW Signal Generation

R&S®SMM-K114

Order number 1441.1824.02

Description

OFDM Signal Generation

R&S®SMM-K261

Order number 1441.1582.02

Description

Multicarrier CW Signal Generation (WinIQSIM2™)

R&S®SMM-K414

Order number 1441.1430.02

Description

OFDM Signal Generation (WinIQSIM2™)

Recommended extras
Product Description
ZZA-KN4_19in-Adapter-3D-front.jpg

R&S®ZZA-KN4

Order number 1175.3033.00

Description

19" Rack Adapter

R&S®SMU-Z6

Order number 1415.0201.02

Description

Additional Cable for connecting R&S®Digital I/Q Interfaces

R&S®DIGIQ-HS

Order number 3641.2948.03

Description

Cable for HS Digital I/Q Interface, 3 m

R&S®TS-USB1

Order number 6124.2531.00

Description

USB Serial Adapter for RS-232 remote control

Documentation
Product Description

R&S®DCV-2

Order number 0240.2193.18

Description

Documentation of Calibration Values

R&S®ACASMM100A

Order number 3598.6993.03

Description

R&S®SMM100A accredited calibration, for instruments with R&S®B1006 6 GHz frequency option

R&S®ACASMM100A

Order number 3598.7019.03

Description

R&S®SMM100A accredited calibration, for instruments with R&S®B1007 7.5 GHz frequency option

R&S®ACASMM100A

Order number 3598.7002.03

Description

R&S®SMM100A accredited calibration, for instruments with R&S®B1012/-B1020/-B1031/-B1044/-B1044N 12.75/20/31.8/44 GHz frequency option

Richiedi informazioni

Hai qualche domanda o ti servono altre informazioni? Compila il modulo e ti ricontatteremo al più presto.

Desidero ricevere informazioni da Rohde & Schwarz tramite

Autorizzazione al marketing

Cosa significa nello specifico?

Accetto che ROHDE & SCHWARZ GmbH & Co. KG e l’entità ROHDE & SCHWARZ o l’azienda controllata riportata nelle note legali di questo sito web, potrà contattarmi tramite il canale prescelto (e-mail o posta) per scopi di marketing e pubblicità (ad es., informazioni su offerte speciali e sconti) in relazione a, in via non limitativa, prodotti e soluzioni del settore di collaudo e misurazione, comunicazioni sicure, monitoraggio e collaudo di rete, trasmissione, media e sicurezza informatica.

I tuoi diritti

La presente dichiarazione di consenso può essere revocata in qualsiasi momento inviando una e-mail con oggetto “Annulla iscrizione" all’indirizzo news@rohde-schwarz.com. In più, in ciascuna e-mail pubblicitaria inviata sarà allegato un link per annullare l’iscrizione. Nella ”Dichiarazione di riservatezza” vengono definiti ulteriori dettagli sull’utilizzo dei dati personali e sulla procedura di ritiro.

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.