Apr 04, 2024 | Comunicato stampa | Test & measurement

The latest DC power supplies from Rohde & Schwarz for every-day manual use in the laboratory as well as for automated applications offer an extremely wide range of functions for entry level instruments. The R&S NGC100 power supply series includes one, two, and three-channel models supplying up to 32 V, 10 A and 100 W DC power.

Jun 11, 2024 | Comunicato stampa | Test & measurement

Rohde & Schwarz has developed the R&S RT-ZISO isolated probing system, further elevating its cutting-edge oscilloscope portfolio. The new R&S RT-ZISO enables extremely accurate measurements of fast switching signals, especially in environments with high common-mode voltages and currents. Also new is the R&S RT-ZPMMCX passive probe with MMCX connector, which complements the isolated probe system perfectly for certain measurement tasks.

May 08, 2024 | Comunicato stampa | Broadcast and Media

Specialist in deliverables for cinema, events and trade shows

Feb 22, 2024 | Comunicato stampa | Wireless communications

Rohde & Schwarz is introducing two new setups for 5G RF and RRM conformance testing. The R&S TS8980S-4A is a cost-efficient single-box solution tailored to 3GPP inband test cases, and the R&S TS8980FTA-3A is a single-rack solution covering all inband and out-of-band test cases. No other solution on the market offers the same capabilities in such a compact format.

Feb 08, 2024 | Comunicato stampa | Wireless communications

The metaverse and extended reality (XR) applications are considered critical to unlocking the full consumer potential of the 5G technology. Rigorous testing is crucial to ensure the performance and market acceptance of these immersive experiences. Rohde & Schwarz and Slalom have collaborated to address this need, developing essential tools to test XR use cases thoroughly prior to market launch. At Mobile World Congress 2024, visitors can experience a first demonstration of how to enable tomorrow’s augmented reality.

Oct 01, 2024 | Comunicato stampa | Test & measurement

CETEX, the all-new Consumer Electronics Test & Development Forum and Expo, invites test and development engineers to RAI in Amsterdam from October 9 to 10, 2024. There, Rohde & Schwarz will exhibit its advanced test and measurement solutions that address the latest emerging challenges in consumer electronics development. Visitors can connect with the company’s experts and explore the latest technologies that help them enhance EMC compliance, debug digital protocols faster, or improve the energy efficiency of their products.

May 23, 2024 | Comunicato stampa | EMC testing

Higher field strengths for critical test environments

Feb 18, 2025 | Comunicato stampa | Test & measurement

The latest radio resource management (RRM) conformance work item from the Global Certification Forum (GCF) has reached “Active” status following the approval of the Rohde & Schwarz R&S TS8980FTA-M1 5G conformance test system as the first to meet test platform approval criteria (TPAC). This includes the validation of RRM FR2 test cases in standalone mode (SA) for both one and two angles of arrival (1x AoA and 2xAoA) within 5G mmWave band combinations.

Dec 22, 2023 | Comunicato stampa | Automotive

The radar target simulator R&S RTS, Rohde & Schwarz’ game-changing solution of automotive radar, in particular its ability to electronically simulate very close-range objects, has been used to verify the performance of NXP® Semiconductors’ next-generation radar sensor reference design. This collaboration enables the automotive industry to take another step forward in the development of automotive radar, the principal technology that enables advanced driver assistance systems (ADAS) and autonomous driving features.

Feb 21, 2024 | Comunicato stampa | Wireless communications

Rohde & Schwarz and SmartViser have partnered to develop a solution for testing compliance with a new regulation that will require Energy Efficiency Index (EEI) labeling for smartphones and tablets sold in the EU. At the core of the solution is the R&S CMX500, a radio communication tester that supports end-to-end testing of all signaling use cases, combined with SmartViser’s viSer test automation application – available for Android and iOS. Both companies will showcase the solution at Mobile World Congress 2024.

Oct 30, 2025 | Comunicato stampa | Wireless communications

Industry leaders collaborate on TC-DFT-s-OFDM waveform testing to advance next-generation wireless technology development.

Nov 10, 2025 | Comunicato stampa | Cybersecurity

Rohde and Schwarz Cybersecurity to develop solutions for VS laptops Munich Munich, 10th of November 2025 — Rohde & Schwarz Cybersecurity has developed a specialized software package solely specifically for selected, high-performance Dell Technologies PCs. This highly secure software package enables mobile work with VS-NfD data on a security architecture that meets even the most modern requirements.

Nov 10, 2025 | Comunicato stampa | SATCOM

Rohde & Schwarz will present its latest test and measurement solutions for the satellite industry at Space Tech Expo 2025. The company provides expertise and tailored tools to help satellite manufacturers and operators ensure optimal system performance and compliance with evolving industry standards. At the expo, Rohde & Schwarz will showcase solutions designed to streamline satellite testing and ensure performance by identifying potential issues before launch.

Nov 03, 2025 | Comunicato stampa | Mobile network testing

The new Rohde & Schwarz TSMS8 scanner boasts industry-leading frequency range and speed to optimize 5G and prepare for 6G networks.

Nov 11, 2025 | Comunicato stampa

Rohde & Schwarz, in collaboration with Connektica, NANOWAVE Technologies, and Expleo, will showcase a next-generation satellite payload test bench demonstrator at Space Tech Expo Europe 2025. The new solution targeting space and NewSpace OEMs, will be hosted on the Expleo booth at Europe’s premier space industry event, stand A38 in Hall 4.

Nov 05, 2025 | Comunicato stampa | Wireless communications

Entering its fifth year, the Mobile Test Summit 2025 will be a virtual event taking place in sessions from November to early December. Hosted by Rohde & Schwarz, this global forum on the future of wireless communications brings together industry leaders, technology experts and testing professionals to explore the latest trends and test challenges shaping the landscape of mobile and wireless communications.

Feb 19, 2025 | Comunicato stampa | Test & measurement

Kyocera has developed an innovative mmWave phased array antenna module (PAAM) that simultaneously creates multiple beams in different directions at different frequencies. These PAAMs will be used in 5G FR2 infrastructure installations, enabling for example site co-location of different operators running networks on different frequency bands. To ensure optimal beam steering and beam directivity of their groundbreaking product, Kyocera relies on CATR-based multi-reflector OTA testing technology from Rohde & Schwarz.

May 15, 2024 | Comunicato stampa | Test & measurement

Rohde & Schwarz extends its portfolio with a 2U high oscilloscope/digitizer tailored for rack mount and other applications where a low-profile form factor is critical. The new MXO 5C series is the company’s first oscilloscope without an integrated display. It delivers the same performance as the previously introduced MXO 5 series, but with a fourth of the vertical height.

Jun 07, 2023 | Comunicato stampa | Test & measurement

For precise and time-saving compliance testing of the latest generation PCIe 5.0 and 6.0 cables and connectors in line with PCI-SIG specifications, Rohde & Schwarz is developing a new R&S ZNrun vector network analyzer automation suite option. For a fully automated verification of a PCIe x8 cable, for instance, the software controls a setup with R&S ZNB vector network analyzer plus scalable R&S OSP switch matrix configuration, creating a multiport VNA solution with 64 test ports. The solution reduces testing times for PCIe x8 cables to just a few minutes for complete test runs with all Thru and all crosstalk combinations plus corresponding metric calculations for Pass/Fail evaluations. By comparison, manual testing takes several hours and involves major risk of connection errors by test engineers.

Aug 21, 2024 | Comunicato stampa | Broadcast and Media

Showcasing 5G Broadcast Innovation at SET Expo 2024 Brazil Stand 2.E77, SET Expo, Distrito Anhembi, São Paulo, 20-22 August 2024 — Industry leaders Motorola and Qualcomm Serviços de Telecomunicações Ltda. ("Qualcomm Brazil") in collaboration with Rohde & Schwarz, have unveiled the transformative capabilities of 5G Broadcast at SET Expo 2024. This joint effort demonstrates how 5G Broadcast, evolving

May 22, 2024 | Comunicato stampa | Non-terrestrial networks (NTN)

At the recent Conformance Agreement Group (CAG) meeting #78 of the Global Certification Forum (GCF), Rohde & Schwarz verified NTN NB-IoT test cases for radio frequency (RF) and radio resource management (RRM), successfully meeting all test platform approval criteria (TPAC). The R&S TS-RRM and R&S TS8980 test platforms were approved for every type of NTN NB-IoT test (RF, Demod and RRM), making Rohde & Schwarz the only company to have activated both NTN NB-IoT radio frequency (RF) and radio resource management (RRM) work items (WI) in the GCF.

Apr 24, 2025 | Comunicato stampa | Test & measurement

Rohde & Schwarz test solutions have been officially approved by the Video Electronics Standards Association (VESA) for testing DisplayPort technology. This achievement reinforces the company’s commitment to delivering high-quality solutions for testing of the physical layer compliant with various industry standards.

Aug 03, 2023 | Comunicato stampa | Test & measurement

Rohde & Schwarz is first to submit 5G Next Generation eCall (NGeCall) protocol test cases to the 3GPP Global Certification Forum (GCF). The company is also launching a new 5G NGeCall application option that simulates the public safety answering point (PSAP) functions required for the end-to-end conformance tests that verify the interoperability of the equipment under test for the complete communication exchange. Both additions to the Rohde & Schwarz eCall portfolio now support early testing of new 5G Next Generation eCall systems with the R&S CMX500 one-box tester, contributing to a timely introduction of 5G NGeCall.

Sep 23, 2024 | Comunicato stampa | Automotive

Next-generation radar, pivotal for the evolution of ADAS and autonomous driving, requires test solutions that deliver unrivalled accuracy, efficiency and reliability. To drive this development further, Rohde & Schwarz launches a radical innovation in automotive radar testing. R&S RadEsT (Radar Essential Tester) automotive radar target simulator emerges as an ultra-compact versatile tool designed to meet a wide array of testing needs along radar sensors lifecycle, from lab-based functional testing to vehicle-level production checks, offering the industry a hitherto unseen price-performance point.

Feb 10, 2025 | Comunicato stampa | Wireless communications

SPEAG and Rohde & Schwarz expand their long-term collaboration with the combination of the CMX500 wideband radio communication tester with the DASY8-3D utilising the enhanced DASY8 Application Programming Interface. This combination allows manufacturers of wireless devices to perform Specific Absorption Rate tests of 5G FR1 devices using the future-proof CMX500 multi-technology, multi-channel one-box signaling tester.

Jun 17, 2025 | Comunicato stampa | Test & measurement

Rohde & Schwarz has updated the R&S FSWP for upcoming applications. The new option R&S FSWP-B56G extends the frequency range up to 56 GHz. With the support of external high-end sources as local oscillators it combines the advantage of an easy-to-use signal source analyzer and a high-end phase noise tester. For additive and residual phase noise measurements on amplifiers Rohde & Schwarz has extended the frequency range of the internal signal source up to 54 GHz. In addition, a new and very easy method for noise figure measurements has been added.

Jul 17, 2024 | Comunicato stampa | Electronic design

Rohde & Schwarz further strengthens its oscilloscope portfolio by introducing the industry’s first ASIC-based zone triggering. With this new approach, the MXO series can offer the world’s fastest zone trigger update rate of up to 600 000 waveforms per second and less than 1.45 us blind time between trigger events. It is up to 10 000 faster than competitive zone triggering offerings. Thanks to the new ASIC-based zone triggering, MXO oscilloscopes can precisely isolate events where traditional triggering does not provide the needed flexibility.

May 07, 2025 | Comunicato stampa | Broadcast and Media

Rohde & Schwarz will showcase its latest energy-efficient transmitters and 5G Broadcast technologies, designed to support network operators and content providers in driving operational resilience, sustainability, and new business models.

Jan 15, 2024 | Comunicato stampa | Mobile network testing

The Electronic Communications Office of Iceland (ECOI) has selected Rohde & Schwarz mobile network testing to assess and benchmark the performance, coverage and capacity of the country's three mobile network operators. The campaign is intended to ultimately improve the quality of service (QoS) and quality of experience (QoE) for the end users in Iceland, given the island’s challenging geography and climate. ECOI commissioned Rohde & Schwarz network analytics services to roll out a benchmarking campaign based on an internationally standardized, transparent process based on the European Telecommunications Standards Institute (ETSI).

Sep 18, 2025 | Comunicato stampa | Test & measurement

The R&S ZNB3000, introduced in February 2025, has already set a benchmark in the mid-range vector network analyzer market with its industry-leading measurement speed, scalability and best-in-class RF performance. With the addition of new high-frequency models, the R&S ZNB3000 will cover an even wider range of applications. At this year’s European Microwave Week (EuMW) in Utrecht, Rohde & Schwarz will demonstrate how the new R&S ZNB3000 – now covering up to 54 GHz – helps engineers fast forward to results.