1000BASE-T1 ethernet software

Compliance test

1000BASE-T1 ethernet software
라이트박스 열기
1000BASE-T1 Ethernet software, Software

주요 사항

  • Test solution of 1000BASE-T1 Ethernet interfaces
  • Predefined, automated test steps
  • Step-by-step wizard for user guidance
  • Meets IEEE 802.3bp specification
  • Complete test solution including fixture and clock divider
  • Multi Domain Icon
  • HD 16 bit

Oscilloscope software

The R&S®RTO-K87 and R&S®RTP-K87 options offer an automated test solution for 1000BASE-T1 according to the IIEEE 802.3bp specification. The test wizard guides the user via illustrated step-by-step instructions. The complete test solution includes fixture and clock divider. The R&S Scope Suite runs on scope or separate PC.

기능 및 장점

Includes all relevant tests

The complete test solution covers all relevant test cases of the IEEE 802.3bp specification for the1000BASE-T1. A test fixture is available for signal access via a differential probe for accurate signals.

라이트박스 열기

Fully automatic or manual tests

The R&S®ScopeSuite has a test wizard for guided steps. The tests used are fully automatic. In addition, single tests can be carried out for efficient debugging. The
limit editor lets you individually adjust standard-specific test limits.

라이트박스 열기

Ease-of-use with guided test steps

The Ethernet compliance test is a fully guided test. Detailed, image-based instructions make it easy to correctly connect the oscilloscope and the probes to the test fixture and the device under test. This increases the ease-of-use and reduces potential setup errors.

Strong reporting functionality

The test results are fully documented in a report created by the R&S®ScopeSuite. Depending on the user’s preference, the test report can include numerical result data or oscilloscope screen shots. The available output formats are PDF, DOC and HTML.

Detailed report including setup parameters, measurement results and screenshots
라이트박스 열기

Detailed report including setup parameters, measurement results and screenshots

Test solution includes oscilloscope, VNA, Waveform generator and test fixtures

The compliance test setup includes test cases that need a waveform generator and a network analyzer. R&S offers a complete solution with the R&S®RTO-B6 waveform generator and the R&S®ZND Vector Network Analyzer. The R&S®ScopeSuite compliance test software fully supports all instruments for a fully integrated compliance test solution.

라이트박스 열기

사용 가능한 모델

사용 가능한 모델
모델
Min. bandwidth
Description
Base unit
R&S®RTO-K87

R&S®RTO-K87

주문 번호 1337.8591.02

Min. bandwidth
2 GHz
Description
Automated compliance test solution for 1000BASE-T1 Ethernet according to the IEEE 802.3bp specification
Base unit
R&S®RTP-K87

R&S®RTP-K87

주문 번호 1800.6554.02

Min. bandwidth
2 GHz
Description
Automated compliance test solution for 1000BASE-T1 Ethernet according to the IEEE 802.3bp specification
Base unit
R&S®RTO6-K87

R&S®RTO6-K87

주문 번호 1801.6970.02

Min. bandwidth
2 GHz
Description
Automated compliance test solution for 1000BASE-T1 Ethernet according to the IEEE 802.3bp specification
Base unit
사양
Recommended configurationR&S®RTO-K87- RTO2024
- RTO-B6 (for tests with distruber)
- RTO-B4
- RT-ZF8 Ethernet test fixture
- RT-ZF6 Frequency converter
- 2 x SMA cables
- ZND or ZNB Network Analyser (option K5 or K6 required)
R&S®RTP-K87- RTP044
- RTP-B6 (for tests with distruber)
- RT-ZF8 Ethernet test fixture
- RT-ZF6 Frequency converter
- 2 x SMA cables
- ZND or ZNB Network Analyser (option K5 or K6 required)

사용 가능한 옵션

Software options
산물
설명

주문 번호 1329.7419.02

설명

High definition mode.

Extras
산물
설명
R&S®RT-ZF2

주문 번호 1317.5522.02

설명

Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet

Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.

R&S®RT-ZF6

주문 번호 1337.8579.02

설명

Frequency converter board

for 1000BASE-T1 compliance test

R&S®RT-ZF7A

주문 번호 1801.4126.02

설명

SMA Adapter

High precision adapter board from automotive connector to SMA

R&S®RT-ZF8

주문 번호 1801.3694.02

설명

Automotive Ethernet Compliance Fixture

Test fixture for 100BASE-T1 and 1000BASE-T1 compliance testing according to IEEE and OPEN TC8

R&S®RTO-B4

주문 번호 1304.8305.02

설명

OCXO 10 MHz

Increase time base accuracy to ±0.02 ppm after calibration

주문 번호 1329.7054.02

설명

Arbitrary waveform generator

Add 2-channel 500 MSample/s waveform generator and 8-channel pattern generator

R&S®ZND-K5

주문 번호 1328.5312.02

설명

Full test set, Base Unit, bidirectional, 4.5GHz

주문 번호 1410.4609.02

설명

Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface

애플리케이션 동영상

1000Base-T1 compliance testing

1000Base-T1 컴플라이언스 테스트

R&S®RTO 및 R&S®ZND를 이용한 1000Base-T1 컴플라이언스 테스트 안내

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 컴플라이언스 테스트

Test mode 2: MDI jitter and clock frequency

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 컴플라이언스 테스트

Test mode 5: Transmitter power spectral densityy (PSD), power level and peak differential output

1000BASE-T1 Compliance Testing Test Mode 6: Maximum output droop

1000BASE-T1 컴플라이언스 테스트

Test mode 6: Maximum output droop

1000BASE-T1 Compliance Testing Test Mode 4: Transmitter Distortion Test with Disturber

1000BASE-T1 컴플라이언스 테스트

Test mode 4: Transmitter distortion test with disturber

정보 요청

질문이 있거나 추가 정보가 필요하십니까? 이 양식에 맞춰 내용을 입력해 주시면 회신 드리겠습니다.

로데슈바르즈에서 다음과 같은 방법으로 정보를 수신하겠습니다

마케팅 동의

Rohde & Schwarz GmbH & Co. KG 및 본 웹사이트의 기업 정보에 명시된 Rohde & Schwarz 각 법인 또는 각 지사가 마케팅 및 광고 목적(예: 특별 행사 및 할인 프로모션에 대한 정보)으로 이메일 또는 우편을 통해 연락하는 것에 동의합니다. 개인 데이터 사용 및 해지 절차에 대한 자세한 내용은 개인정보 보호정책마케팅 동의 단락에 명시되어 있습니다.

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.