R&S®EPL1000 EMI test receiver

Speed. Flexibility. Compliance.

R&S®EPL1000 EMI test receiver
Abrir Lightbox
R&S®EPL1000 EMI test receiver
Abrir Lightbox
R&S®EPL1000 EMI test receiver
Abrir Lightbox
R&S®EPL1000 EMI test receiver
Abrir Lightbox
R&S®EPL1000 EMI test receiver
Abrir Lightbox
R&S®EPL1000 EMI test receiver
Abrir Lightbox
R&S®EPL1000 EMI test receiver, front low R&S®EPL1000 EMI test receiver, front high R&S®EPL1000 EMI test receiver, side view R&S®EPL1000 EMI test receiver, back high R&S®EPL EMI test receiver, side view R&S®EPL1000 EMI test receiver

Key Facts

  • Preselection filters
  • Time domain scan
  • Tracking generator
  • Battery operation
  • Pulse protected input

Quick, precise and compliant EMI measurements up to 30 MHz.

The R&S®EPL1000 fully complies with CISPR16-1-1. The very fast time domain scan can check the complete CISPR bands A or B in a single shot. Built-in preselection ensures a high dynamic range and enables the acquisition of short pulses. The R&S®EPL1000 offers 4-channel click rate analysis, a spectrogram function, IF analysis and further functions for detailed analysis. Automation simplifies measurements and ensures exact reproducibility of test sequences. These and many more functions make the R&S®EPL1000 ideal for conducted voltage and current measurements. Typical applications include precompliance measurements, precertification and certification in line with IEC, EN, CISPR and FCC.

Features & benefits

Precise identification of EMI

Precise and standard-compliant EMI identification

The R&S®EPL1000 meets CISPR 16-1-1 requirements and also supports the decadic 6 dB bandwidths required by MIL-STD-461 and DO-160. The R&S®EPL1000 can be used to develop and certify a wide range of electrical products. Features include:

  • EMI detectors and bandwidth 
  • Preselection filters
  • Automatic signal level adaptation 
  • Limit line display and checking
  • Report generation

Report generation
Abrir Lightbox

Report generation

Layout definition and preview of test report

Time domain scan

Fast measurement with time domain scan

The R&S®EPL1000 can measure an entire CISPR band (A or B) in a single shot, for much shorter total measurement times. Highly parallelized measurements enable longer gap-less checks of relatively large frequency segments and reliable and fast detection of sporadic emissions.

One shot per CISPR band
Abrir Lightbox

One shot per CISPR band

Parallelization of measurement within the CISPR bands 

Automation

  • Automatic measurement of multiple frequency segments with individual settings
  • Automatic measurement of multiple lines connected to a Rohde & Schwarz LISN
  • Automatic preview and final measurement sequence instead of the final detector with time domain scan 

Automatic measurement example
Abrir Lightbox

Automatic measurement example

Measurement of A and B bands for neutral and live lines.

EMI analysis

Comprehensive EMI analysis functions

The extensive analysis features include 

  • 4-channel click rate analysis
  • Bar graph - level at a frequency
  • Spectrogram - level versus frequency and time
  • Zero span - level at a frequency versus time
  • IF analysis
  • AM/FM output
  • Spectrum analysis functions

Measurement example with spectrogram
Abrir Lightbox

Measurement example with spectrogram

Visualization of different EUT operating modes

Available options

Hardware options
Product
Descripción
R&S®EPL1-B91

Order Number 1350.4073.02

Descripción

Internal generator 5 kHz to 30 MHz

R&S®EPL1-B19

Order Number 1350.4450.02

Descripción

Replacement SSD including controller unit

R&S®FPL1-B4

Order Number 1323.1902.02

Descripción

OCXO accurate reference frequency

High precision frequency reference

R&S®FPL1-B10

Order Number 1323.1890.02

Descripción

GPIB interface

Additional interface for remote control by GPIB, plug-in unit

R&S®FPL1-B30

Order Number 1323.1877.02

Descripción

DC Power supply for 12/24 V supply

R&S®FPL1-B31

Order Number 1323.1725.02

Descripción

Li-Ion battery pack

Software options
Product
Descripción
R&S®EPL1-K56

Order Number 1350.4067.02

Descripción

IF analysis

R&S®FPL1-K7

Order Number 1323.1731.02

Descripción

AM/FM/PM analog modulation analysis

Modulation analysis for analog (AM, FM, PM) modulated single carrier signals
(For use in ZNL, ZNLx-B1 is required)

R&S®EPL1-K59

Order Number 1350.4509.02

Descripción

Click rate analyzer

Accessories
Product
Descripción
R&S®EPL1-Z2

Order Number 1350.4309.02

Descripción

Soft carrying bag for transport and outdoor operation

R&S®EPL1-Z3

Order Number 1350.4315.02

Descripción

H-style shoulder harness (requires R&S®EPL1-Z2 option)

R&S®FPL1-Z4

Order Number 1323.1677.02

Descripción

Spare battery pack

R&S®FPL1-Z5

Order Number 1323.1690.02

Descripción

Anti-glare film

R&S®EPL1-Z6

Order Number 1350.4321.02

Descripción

19" rackmount kit

R&S®FSV-B34

Order Number 1321.3950.02

Descripción

Charger for R&S®FSV-B32 lithium-ion battery pack

R&S®EZ-21

Order Number 1107.2087.03

Descripción

Control Cable, 3 m

from R&S®ESU/ESCI/ESPI/ESIB/ESxS/EPL1000 and FPL1000 to R&S®AMN6500/ENV216/ENV432/ENV4200

R&S®EZ-21

Order Number 1107.2087.10

Descripción

Control Cable, 10 m

from R&S®ESU/ESCI/ESPI/ESIB/ESxS/EPL1000 and FPL1000 to R&S®AMN6500/ENV216/ENV432/ENV4200 

R&S®DCV-2

Order Number 0240.2193.09

Descripción

Documentation of calibration values

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted en breve.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Términos y condiciones:

La convocatoria es válida del 5 de Abril al 20 de junio de 2021. Participan transmisores de radio FM y TV de cualquier marca que se encuentren aún en operación. Se tomarán válidos para participar los datos registrados solo durante ese periodo de tiempo, solo se puede llenar el formulario 1 vez por persona. El acceso a ingresar datos en el formulario se restringirá el día 21 de Junio a las 00:00hrs. El 30 de Junio de 2021 anunciaremos a un ganador de cada categoría en este mismo web, por correo electrónico y a través de nuestras redes sociales. Más informacion. Anamaria@rohde-schwarz.com

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y el correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente éstas tienen facultad para recibir los premios. No está permitida la participación de una persona individual por nombre y cuenta propia, sino que deberá hacerlo como representante de una persona jurídica llenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo tendrá lugar en la sede de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de no aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de llenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán por cuenta del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.