Key facts
The R&S®RT-ZVC multi-channel power probe offers up to four voltage and four current channels with 18-bit resolution for high dynamic range current and voltage measurements. With up to two R&S®RT-ZVC probes supported on an R&S®RTE or R&S®RTO oscilloscope, it is possible to analyze eight high dynamic range voltage and eight high dynamic range current signals in parallel with signals captured by the oscilloscope.
The R&S®RT-ZVC probe provides an extraordinarily high dynamic range for measuring both active and sleep currents, in this example 12 mA and 30 μA. Automated measurements make it possible to calculate the total energy consumption of specific activity phases of the device under test.
High-sensitivity current measurement
Measure active and sleep currents at the same time to optimize power consumption of battery operated devices.
A bandwidth of 1 MHz and a sampling rate of 5 Msample/s allows you to capture fast current pulses. To analyze the overall power consumption of battery powered devices, the very low sleep-mode currents have to be captured at the same time. For very high dynamic range measurements, the integrated lowpass filter reduces the bandwidth down to 5 kHz and minimizes overall system noise.
Flexible digital acquisition system
The R&S®RT-ZVC probe's digital acquisition system provides 18-bit resolution, a 5 Msample/s sampling rate and 1 MHz bandwidth with configurable lowpass filter.
The R&S®RT-ZVC multi-channel power probe comes with a set of high-quality pin connector cables and solder-in leads to connect the probe in typical embedded electronics measurement scenarios. 4 mm connector cables with different lengths are optionally available as are BNC type connector cables for connecting standard oscilloscope voltage and current probes to extend the voltage and current measurement range.
PCB current and voltage probing cable set
Order number 1326.0259.02
Order number 1326.0259.04
Order number 1333.1686.02
Extended cable set
for R&S®RT-ZVC, PCB probing, 1 current and voltage lead, length: 32 cm
Order number 1333.1692.02
Extended cable set
for R&S®RT-ZVC, 4 mm probing, 1 current and voltage lead, length: 32 cm
Order number 1333.1770.02
Oscilloscope interface cabel
for R&S®RT-ZVC
Order number 1333.1892.02
Extended cable set
for R&S®RT-ZVC, 4 mm probing, 1 current and voltage lead, length: 1 m
Order number 1333.1905.02
Extended cable set
for R&S®RT-ZVC, PCB probing, 1 current and voltage lead, length: 1 m
Order number 1333.1911.02
Solder-in cable set
for R&S®RT-ZVC, 4 current and voltage solder-in cables, solder-in pins
Order number 1337.9130.02
Extended cable set
for R&S®RT-ZVC, BNC connector, 1 current and voltage lead, length: 16 cm
Order number 1333.0750.02
Digital Extension Port for R&S®RTE
Required for R&S®RT-ZVC02 and R&S®RT-ZVC04 Hardware. Included in R&S®RTE-B1
Order number 1333.0738.02
Digital Extension Port for R&S®RTO2000
Required for R&S®RT-ZVC02 and R&S®RT-ZVC04 Hardware. Included in R&S®RTO-B1
Order number 1337.9581.02
Digital Extension Port for R&S®RTP
Required for R&S®RT-ZVC02 and R&S®RT-ZVC04 Hardware. Included in R&S®RTP-B1
Related products
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.
