the R&S®UPV-K7 and R&S®UPV-K71 optionsR&S®UPV-K9/-K91/-K92/-K98/-K101 option package for acoustic measurements on mobile phonesR&S®UPV-K4 remote control option for remote control of the R&S®UPV audio analyzerR&S®UPV-K1 universal sequence controller for creating and executing measurement sequencesChange of the source impedance from 200 Ω to 150 Ω (R&S®UPV-U1 option)BNC monitoring outputs (R&S®UPV-U2

Versatile audio analyzers and audio switchers cover audio measurements on many digital and analog interfaces from car radio testing to hearing aids.

Rohde & Schwarz offers a wide range of instruments and systems such as wireless device testers, infrastructure testers, protocol testers, conformance and preconformance testers.

Overview Key Facts The 3QUEST method (R&S® UPV-K101 option) enables analyses in line with and and is used for measurements on mobile phones Key FactsThe R&S®UPV supports measurements on mobile phones using background noise in line with .

Overview Key Facts The R&S® UPV-K98 option allows the R&S® UPV audio analyzer to control and measure the sound field Key FactsThe R&S®UPV supports measurements on mobile phones using background noise in line with .

Overview Key FactsThis option enables users to operate the R&S®UPV by remote control over either a LAN, USB or IEC/IEEE bus interface in line with IEC 625/IEEE 488. The commands used conform to the SCPI guidelines to the extent possible. Key FactsThis option enables users to operate the R&S®UPV by remote control over either a LAN, USB or IEC/IEEE bus interface in line with IEC 625/IEEE 488.

Overview Key FactsThe low distortion generator is required for all applications where extremely pure analog signals are necessary, or when an extended frequency range up to 185 kHz is needed. Key FactsThe low distortion generator is required for all applications where extremely pure analog signals are necessary, or when an extended frequency range up to 185 kHz is needed. Its inherent distortion is

Overview Key FactsThe R&S®UPV-B41 option, which is inserted at the rear of the base unit, provides the R&S®UPV audio analyzer with I²S interfaces for generator and analyzer. Key FactsThe R&S®UPV-B41 option, which is inserted at the rear of the base unit, provides the R&S®UPV audio analyzer with I²S interfaces for generator and analyzer.

Overview Key FactsThis software option expands the functions of the R&S®UPV-B2 option to include a conclusive analysis and the generation of the additional digital data Key FactsThis software option expands the functions of the R&S®UPV-B2 option to include a conclusive analysis and the generation of the additional digital data:Analysis of the channel status data; the data is output in binary format

Key FactsThis software package expands the R&S®UPV-B42 option to include the measurement of digital audio signals that are transmitted in line with pulse density modulation method.

Overview Key FactsThis option enables users to create and carry out measurement sequences, turning the R&S®UPV into an automatic tester. As a result, small test systems can be implemented cost-effectively since no additional control is required. Key FactsThis option enables users to create and carry out measurement sequences, turning the R&S®UPV into an automatic tester.

Overview Key FactsThe R&S®UPV-B42 option expands the R&S®UPV audio analyzer by adding universal, digital audio interfaces with which the parameters of the digital formats can be set with great flexibility.

Overview Key FactsThis hardware option provides the R&S®UPV with a second analog output amplifier. This also allows dual-channel sinewave signals to be output on the two analog output channels. Key FactsThis hardware option provides the R&S®UPV with a second analog output amplifier.

Overview Key FactsThe rub & buzz measurement enables users to determine production errors in loudspeakers in next to no time by measuring the interference signals in the frequency range above the usual distortion products. Key FactsThe rub & buzz measurement enables users to determine production errors in loudspeakers in next to no time by measuring the interference signals in the frequency range above

Optionally, the available connectors can be expanded to include two BNC female connectors by adding the R&S®UPV-U2 option. It then becomes possible to connect an oscilloscope, for example.

The R&S®UPV offers this measurement in line with the method licensed by the Opticom GmbH company in Erlangen, Germany.

A cable with a junction to eight XLR female connectors is available as the R&S®UPV-Z48 option.

The R&S®UPV offers these measurements in line with the methods licensed by the Opticom GmbH company in Erlangen, Germany.The measurement method referred to as the perceptual evaluation of audio quality (PEAQ) was published in 1998 as Recommendation ITU-R BS.1387 by the International Telecommunication Union.

Overview Key FactsEquipped with the R&S®UPV-K63 option, the R&S®UPV audio analyzer now also offers the measurement method referred to as the perceptual objective listening quality analysis (POLQA), which was published in 2011 as Recommendation ITU-T P.863 by the International Telecommunication Union.

Key FactsAfter the R&S®UPV-K7 option has been installed in the R&S®UPV, the audio analyzer can test hearing aids in compliance with standards.

The R&S®UPV-K22 option expands the functionality of the R&S®UPV-B2 option. Key FactsThis option enables the user to analyze the physical parameters of the digital audio interface.

Key FactsAfter the R&S®UPV-K7 option has been installed in the R&S®UPV, the audio analyzer can test hearing aids in compliance with standards. The tests conform to IEC 60118 parts 0, 1, 2 and 7 as well as ANSI S3.22, therefore covering all specified tests.When necessary, the R&S®UPV-Z7 cable set for connecting the audio analyzer with an acoustic measurement chamber is available.

The R&S®UPV-K92 option is required when measuring CDMA2000® phones in line with the TIA-1042 and 3GPP2 C.S0056-0 standards.Operation always requires a combination of R&S®UPV-K9 and at least one of the R&S®UPV-K9x options.

The R&S®UPV-K92 option is required when measuring CDMA2000® phones in line with the TIA-1042 and 3GPP2 C.S0056-0 standards.Operation always requires a combination of R&S®UPV-K9 and at least one of the R&S®UPV-K9x options.

The R&S®UPV-K92 option is required when measuring CDMA2000® phones in line with the TIA-1042 and 3GPP2 C.S0056-0 standards.Operation always requires a combination of R&S®UPV-K9 and at least one of the R&S®UPV-K9x options.

It can be complemented by the following options:R&S® UPV-K21 digital audio protocol for analyzing and generating digital auxiliary data (channel status, validity, parity)R&S® UPV-K22 jitter and interface test for analyzing the physical parameters of the digital audio interfaceDigital audio equipment can be interconnected via standardized interfaces.

As an add-on unit to the R&S®UPV and R&S®UPP audio analyzers, the R&S®UPZ is directly operated from the graphical user interface.

If, on top of that, a cost-efficient instrument for system use is what you need, the solution is the R&S®UPP audio analyzer.The R&S®UPV audio analyzer – the high-end instrument from – has held a solid position in all audio T&M applications for years.

R&S ® TA-TRS is a sequencer test software that further enhances seamless RF test experience for broadcast receivers based on ETSI EN 303 340, EN 303 345 and EN 303 372-2

through visualization of message flowAutomatic pcap file generation for typical IP-based analysisIMS-centric verdict presentation in XML log filesReport with pass/fail verdict for seeing results at a glanceUpgradeability to perform LTE protocol testingUpgradeability to R&S®CMW-PQA VoLTE performance testing under realistic network conditionsUpgradeability to perform audio quality tests with the R&S®UPV