Let's talk IoT video series

Let’s talk IoT – The everlasting demand for optimizing IoT power consumption

The video explains these features and demonstrates how you can test and optimize the power consumption of your IoT device to achieve a 10 years battery life.

22.07.2019

Let’s talk IoT – The easy way of lab testing under real world conditions

The video demonstrates the easy-to-use Field-to-Lab test solution from Rohde & Schwarz that brings real network conditions to the lab.

22.07.2019

Let’s talk IoT – 5G mMTC: What will happen with NB-IoT and LTE-M in 5G?

But today, everyone is talking about 5G mMTC. So what will happen with NB-IoT and LTE-M in 5G? This video provides the answer.

22.07.2019

Testing the secure communication behavior of IoT devices

The video demonstrates how a unique test solution from Rohde & Schwarz can help to make IoT devices more secure and protect users’ privacy.

13.09.2018

NGeCall – an interesting application for IoT?

The video provides a prospect of how NGeCall can be used for much more IoT applications in the future.

13.09.2018

RF testing of Sigfox modules and devices

The video shows how easy it is to perform some of the essential RF tests required for the certification of Sigfox modules and devices.

13.09.2018

eSIM for M2M: what does it mean for testing?

The video shows the evolution of SIMs from a full-size SIM card introduced in 1991 to the embedded SIM (eSIM) for M2M.

13.09.2018

Insights into LTE-M in 3GPP Release 14

This video provides a short overview about the 3GPP Release 14 features for LTE-M. It also explains in detail the new device category M2 and the positioning with OTDOA.

03.09.2018

Sigfox in a nutshell

This video explains Sigfox and recommended test setups based on Rohde & Schwarz signal generators and analyzers to verify the most important performance parameters such as RF performance (RX and TX tests) and power consumption.

06.06.2018

Bluetooth for the Internet of Things

In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment.

03.05.2018

The power of testing the Internet of Things

The new Rohde & Schwarz IoT video series explains the main test challenges the wireless IoT industry is facing in development, manufacturing and deployment of IoT devices, networks and applications.

03.05.2018

LoRaWAN: Testing the receiver sensitivity

In this video, we talk about the test of the most important LPWAN performance parameters on the example of LoRaWAN and demonstrate the impact of different spreading factors on the receiver sensitivity.

03.05.2018

Measuring power consumption of LTE modules in connected mode

This video demonstrates precise power consumption measurements on an LTE-M (Cat-M1) device as example. We will show the impact of different parameters such as eDRX on the power consumption in connected mode.

03.05.2018

Measuring power consumption of LTE modules in idle mode

This video demonstrates precise power consumption measurements on an LTE-M (Cat-M1) device as example. We will show the impact of different parameters such as eDRX and PSM on the power consumption in idle mode.

03.05.2018

NB-IoT/eMTC power saving features: eDRX vs. PSM

In this video we explain the power saving features eDRX and PSM applicable for NB-IoT and eMTC.

03.05.2018

The importance of NB-IoT network measurements

The video shows typical NB-IoT use cases and discusses the biggest challenge in NB-IoT networks: coverage. What methods are used to increase the coverage in DL and UL direction?

03.05.2018

NB-IoT network field measurements and analysis

This video demonstrates what deep insights into an NB-IoT network you get when using a network scanner and an NB-IoT device in parallel, both connected to the R&S®ROMES4 mobile network optimization software.

23.04.2018

Demystifying LoRaWAN

The video discusses LoRaWAN, one of the most promising LPWAN technologies. Find out how it works and how to analyze LoRa signals using the R&S®RTO oscilloscope.

05.03.2018

How to test NB-IoT network coverage

This video demonstrates how easy it is to test NB-IoT coverage with a network scanner, such as the R&S®TSMA, and the R&S®ROMES4 analysis software.

09.02.2018

More webinars and videos

IoT Webinars

Curious how the Internet of Things will influence our daily lifes? Watch our IoT webinars to obtain a comprehensive technology outlook, to gain insights about further trends in cellular and non-cellular IoT and to learn more about major upcoming test challenges.

View more

Rohde & Schwarz at MWC 2018 - Videos

Didn't make it to the Mobile World Congress 2018 in Barcelona? Watch our short videos to discover our latest test and measurement innovations for mobile device and mobile network testing with focus on 5G, LTE-A Pro and IoT we had showcased.

View more