Download-Center

Provides the basic information required for remote control connections via SCPI.

Englisch - 16.07.2025

The ARB Toolbox is an easy-to-use, feature packed software package that is used for many ARB waveform related tasks. Use this software for creating ARB waveform files from custom IQ data; import data from MATLAB .mat files; evaluate waveform content graphically; resample or filter waveforms; create analog modulated signals as ARB files; edit marker data in waveform files; use the composer for the creation of complex multi carrier scanarios.

Englisch - 13.12.2018

Provides the information required to prepare the instrument for use and start working.

Englisch - 22.05.2026

Describes all instrument functions and remote control commands, including measurement and programming examples, for the base unit.

Englisch - 22.05.2026

3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141. This application note describes how all mandatory RF transmitter tests (TS 38.141-1, chapter 6), according to Release 16, can be performed quickly and conveniently with signal or spectrum analyzers from Rohde & Schwarz by either choosing manual operation or a remote control approach. Moreover, some test cases require additional signal generation equipment from Rohde & Schwarz.In Addition, a new Python software library comes with this application note to enable the remote control approach of base station testing. This example requires the RsInstrument module which can be found on pypi.org or installed via 'pip' and is provided as is.

Englisch - 27.01.2021

The signal conditioning in the RF front-end of signal analyzers is crucial to achieve the best performance with respect to image-suppression, noise-floor, dynamic range and other RF-key parameters.Precise signal levelling is especially important for complex measurements like Error-Vector-Magnitude (EVM). To minimize the measurement uncertainty from test system contributions over a wide range of different levels, the RF front-end needs to be adapted continuously according to the signal characteristics, signal power and frequency - ideally using an automatic levelling algorithm.This document describes the approach of a waveform specific, on-site characterization of the signal analyzer: For each waveform and frequency of interest, the instrument is evaluated in a first step. With this additional data, a fast and repeatable auto-levelling can be performed during the actual measurement.

Englisch - 24.01.2022

This application note explains how to convert different Rohde & Schwarz I/Q file formats among each other using the supplied software tool.

Englisch - 23.09.2015

R&S®Server-Based Testing helps reduce test times for workloads that can be parallelized. 5G New Radio (5G NR) multicarrier signals are an ideal workload because each component carrier can be analyzed independently and in parallel. In an example EVM measurement, scenario test times are reduced significantly even when receiving I/Q data from just a single instrument.

Englisch - 13.09.2021

O-RAN radio units (O-RU) contribute significantly to the high power consumption of 5G networks. Making O-RUs energy efficient without sacrificing O-RAN innovations is a top priority.

Englisch - 19.03.2024

Deutsch - 31.07.2024

Describes the specific functions of the application, as well as I/Q input interfaces, including the remote control commands with programming examples.

Englisch - 22.05.2026

Provides the information required to prepare the instrument for use, start working and operating.

Englisch - 16.02.2023

Provides the information required to prepare the instrument for use, start working and operate the instrument.

Englisch - 16.02.2023

Describes the specific functions of the application, including the remote control commands with programming examples.

Englisch - 22.05.2026

Describes the specific functions of the application, including the remote control commands with programming examples.

Englisch - 22.05.2026