TDR/TDT analysis Oscilloscope software

General analysis

TDR/TDT analysis Oscilloscope software
Ingrandisci immagine
TDR/TDT analysis Oscilloscope software
Ingrandisci immagine
TDR/TDT analysis Oscilloscope software
Ingrandisci immagine
TDR/TDT analysis Oscilloscope software
Ingrandisci immagine
TDR/TDT analysis oscilloscope software, software TDR/TDT analysis oscilloscope software, screenshot TDR/TDT analysis oscilloscope software, screenshot TDR/TDT analysis with R&S oscilloscopes

Key Facts

  • Supports single-ended and differential TDR/TDT analysis
  • Uses the internal R&S®RTO/RTP-B7 16 GHz differential pulse source
  • A wizard guides through calibration and measurement
  • Multi-domain icon

Oscilloscope software

The R&S®RTO/RTP-K130 option combines the R&S®RTO/RTP-B7 pulse source and the analog input channels of the R&S®RTO or RTP oscilloscope to create a time domain reflection (TDR) and transmission (TDT) analysis system that helps characterize and debug signal paths, including PCB traces, cables and connectors. The option allows both single-ended and differential measurements (only with RTP).

Features & benefits

Single-ended and differential TDR/TDT

The R&S®RTO/RTP-B7 pulse source provides a highly symmetrical differential pulse signal with a steep rise time of 22 ps. This enables either single-ended or differential time domain reflection (TDR) and/or transmission (TDT)  analysis with the R&S®RTP. The R&S®RTO only supports single-ended TDR/TDT measurements. 

Single-ended TDR
Ingrandisci immagine

Single-ended TDR

Setup dialog for the configuration of a single-ended time domain reflectometry (TDR) measurement. Display of impedance and reflection coefficient over distance.

Wizard support for calibration and measurement

Guided operation

The TDR/TDT wizard guides users through the test setup calibration based on the selected measurement type (TDR, TDR/TDT, TDT) and configuration (single-ended or differential). The wizard then uses illustrations to help with the test setup and parameter definition for the measurement.

Wizard for calibration TDR/TDT setups
Ingrandisci immagine

Wizard for calibration TDR/TDT setups

A wizard guides users through the TDR/TDT setup calibration.

Complete solution

Fully integrated

The R&S®RTP-K130 TDT/TDR analysis option and R&S®RTO/RTP-B7 pulse option are fully integrated in the oscilloscope graphical user interface. The pulse option includes all the calibration and measurement accessories, such as shorts, 50 Ohm terminations or cables. The R&S®RT-Z17 low-loss and phase-matched cable pair is required for differential measurements.

Ingrandisci immagine

Available models

Available models
Modelli
Max. analysis bandwidth
Max. bandwidth diff. TDR+TDT
Pulse source
Supported oscilloscope models
Base unit

R&S®RTP-K130

Order Number 1326.3093.02

Max. analysis bandwidth
16 GHz
Max. bandwidth diff. TDR+TDT
8 GHz
Pulse source
R&S®RTP-B7
Supported oscilloscope models
RTP044, RTP064, RTP084, RTP134, RTP164
Base unit

R&S®RTO-K130

Order Number 1326.3087.02

Max. analysis bandwidth
6 GHz
Max. bandwidth diff. TDR+TDT
4 GHz
Pulse source
R&S®RTO-B7
Supported oscilloscope models
RTO2024, RTO2034, RTO2044, RTO2062
Base unit

R&S®RTO6-K130

Order Number 1801.6893.02

Max. analysis bandwidth
6 GHz
Max. bandwidth diff. TDR+TDT
4 GHz
Pulse source
  R&S®RTO6-B7
Supported oscilloscope models
R&S®RTO64 with R&S®RTO6-B92/93/94/96
Base unit

Available options

Hardware options
Product
Descrizione
R&S®RTP-B7

Order Number 1333.2001.02

Descrizione

Differential 16 GHz pulse source for R&S®RTP High-Performance Oscilloscope

R&S®RTO-B7

Order Number 1333.2030.02

Descrizione

Differential 16 GHz pulse source for R&S®RTO2000 Oscilloscope

General accessories
Product
Descrizione
R&S®RT-ZA16

Order Number 1320.7074.02

Descrizione

Precision BNC to SMA adapter

R&S®RT-ZA17

Order Number 1337.8991.02

Descrizione

Matched pair SMA cable for TDR measurement

Microwave probes
Product
Descrizione
R&S®DPSS201503

Order Number 1801.4649.02

Descrizione

Differential microwave probe, 20 GHz, 0.3 mm pitch

R&S®DPSS201504

Order Number 1801.4655.02

Descrizione

Differential microwave probe, 20 GHz, 0.4 mm pitch

R&S®DPSS201505

Order Number 1801.4661.02

Descrizione

Differential microwave probe, 20 GHz, 0.5 mm pitch

R&S®DPSS201508

Order Number 1801.4678.02

Descrizione

Differential microwave probe, 20 GHz, 0.8 mm pitch

R&S®DPSS201510

Order Number 1801.4684.02

Descrizione

Differential microwave probe, 20 GHz, 1.0 mm pitch

R&S®SPGR201502

Order Number 1801.4703.02

Descrizione

Single-ended microwave probe, 20 GHz, 0.25 mm pitch

R&S®DPSS201512

Order Number 1801.4690.02

Descrizione

Differential microwave probe, 20 GHz, 1.2 mm pitch

R&S®SPGR201504

Order Number 1801.4710.02

Descrizione

Single-ended microwave probe, 20 GHz, 0.4 mm pitch

R&S®SPGR201505

Order Number 1801.4726.02

Descrizione

Single-ended microwave probe, 20 GHz, 0.5 mm pitch

R&S®SPGR181508

Order Number 1801.4732.02

Descrizione

Single-ended microwave probe, 18 GHz, 0.8 mm pitch

R&S®SPGR181510

Order Number 1801.4749.02

Descrizione

Single-ended microwave probe, 18 GHz, 1.0 mm pitch

R&S®SPGR161512

Order Number 1801.4755.02

Descrizione

Single-ended microwave probe, 16 GHz, 1.2 mm pitch

R&S®SPGR161514

Order Number 1801.4761.02

Descrizione

Single-ended microwave probe, 16 GHz, 1.4 mm pitch

R&S®SPGR161516

Order Number 1801.4778.02

Descrizione

Single-ended microwave probe, 16 GHz, 1.6 mm pitch

R&S®DP-HAND01

Order Number 1801.4826.02

Descrizione

D-Probe Handle for hand probing

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.