Time domain analysis with VNA

Time domain analysis with VNA
Ingrandisci immagine
Time domain analysis with VNA, Screenshot

Key Facts

  • Rise time resolution from 9 ps
  • Formats: lowpass impulse and step, bandpass impulse
  • Windowing/time gates: rectangular, hamming, Hann, Bohman, Dolph-Chebychev
  • Signal integrity test function with eye diagram

Time domain and distance-to-fault measurements

The time domain and distance-to-fault options display discontinuities, reflection factors or impedance versus delay/length. The TD option includes step and impulse response, lowpass/bandpass, frequency spacing and gated S-parameters. A wide selection of windows can be used to optimize the time domain response and suppress sidelobes due to the finite sweep range. Time gating and transforming back to the frequency domain eliminates unwanted responses.

Features & benefits

Supported formats

The right format for the right application

The Rohde & Schwarz time domain option supports the following formats: lowpass impulse and step, bandpass impulse. The easy-to-use bandpass mode works with any set of a harmonic grid. The lowpass mode offers higher resolution factors in the DC value information.

Ingrandisci immagine

Windowing/time gating

Optimize measurement results with windowing and gating

The finite sweep range in frequency domain measurements with discontinuous transitions at the start and stop frequency broadens the impulses and causes sidelobes (ringing) in the time domain response. Windowing can reduce this effect and optimize the time domain response. A time gate is used to eliminate unwanted responses that appear on the time domain transform. An active time gate acts on the trace in time domain and frequency domain representations.

Ingrandisci immagine

Signal integrity

Valuable insights into the signal integrity of your design

The enhanced time domain option enables the R&S®VNA to implement a "virtual" signal generator for generating multilevel PAM signals (NRZ, PAM-4, PAM-8, PAM-16), including simulated lowpass behavior. The eye diagram calculated from the DUT's measured S-parameters provides an extensive overview of the system's signal integrity. Further building blocks for pre-emphasis, jitter, noise and equalization enable synthesization of the transmission system's transmitter and receiver parts.

Ingrandisci immagine

Time domain resolution

Optimum resolution for optimum results

The Rohde & Schwarz time domain options offer a minimum resolution of up to 18 ps with an ambiguity range of up to 1.5 µs depending on the instrument of choice. Rise time resolution is as narrow as 9 ps. For more information, see the comparison table.

Available models

Available models
Modelli
Supported VNA
Maximum frequency/maximum # of points
Distance to fault
Enhanced time domain w/eye diagram
Maximum resolution [continuous sweep]/rise time
Maximum ambiguity range @ maximum resolution

R&S®ZNA-K2

Order Number 1332.5336.02

Supported VNA
Maximum frequency/maximum # of points
67 GHz / 100,001
Distance to fault
-
Enhanced time domain w/eye diagram
ZNA-K20
Maximum resolution [continuous sweep]/rise time
30 ps / 15 ps
Maximum ambiguity range @ maximum resolution
1.5 µs

R&S®ZVAB-K2

Order Number 1164.1657.02

Supported VNA
Maximum frequency/maximum # of points
110 GHz / 60,001
Distance to fault
-
Enhanced time domain w/eye diagram
-
Maximum resolution [continuous sweep]/rise time
18 ps / 9 ps
Maximum ambiguity range @ maximum resolution
55 µs

R&S®ZNB-K2

Order Number 1316.0156.02

Supported VNA
Maximum frequency/maximum # of points
40 GHz / 100,001
Distance to fault
ZNB-K3
Enhanced time domain w/eye diagram
ZNB-K20
Maximum resolution [continuous sweep]/rise time
50 ps / 25 ps
Maximum ambiguity range @ maximum resolution
2.5 µs

R&S®ZNBT-K2

Order Number 1318.8425.02

Supported VNA
Maximum frequency/maximum # of points
40 GHz/100,001
Distance to fault
R&S®ZNBT-K3
Enhanced time domain w/eye diagram
R&S®ZNBT-K20
Maximum resolution [continuous sweep]/rise time
50 ps/50 ps
Maximum ambiguity range @ maximum resolution
2.5 µs

R&S®ZND-K2

Order Number 1328.5393.02

Supported VNA
Maximum frequency/maximum # of points
8.5 GHz / 5001
Distance to fault
ZND-K3
Enhanced time domain w/eye diagram
-
Maximum resolution [continuous sweep]/rise time
235 ps / 117 ps
Maximum ambiguity range @ maximum resolution
6.25 µs

R&S®ZVL-K3

Order Number 1306.0201.02

Supported VNA
Maximum frequency/maximum # of points
13.6 GHz / 4,001
Distance to fault
ZVL-K2
Enhanced time domain w/eye diagram
-
Maximum resolution [continuous sweep]/rise time
147 ps / 73 ps
Maximum ambiguity range @ maximum resolution
2.94 µs

R&S®ZNL-K2

Order Number 1323.1819.02

Supported VNA
Maximum frequency/maximum # of points
6 GHz / 100,001
Distance to fault
ZNL-K3
Enhanced time domain w/eye diagram
-
Maximum resolution [continuous sweep]/rise time
333 ps / 166 ps
Maximum ambiguity range @ maximum resolution
16.7 µs

Available options

General
Product
Descrizione
R&S®ZNA-K20

Order Number 1332.4746.02

Descrizione

Extended time domain analysis

incl. eye diagram, for R&S®ZNA

R&S®ZNB-K20

Order Number 1326.8072.02

Descrizione

Extended time domain analysis

R&S®ZNBT-K20

Order Number 1319.4400.02

Descrizione

Extended time domain analysis with eye diagram

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Autorizzazione al marketing

La tua richiesta è stata ricevuta. Ti ricontatteremo a breve.
An error is occurred, please try it again later.
Informazioni generali e legali

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termini e condizione del Concorso 10 anni di oscilloscopi Rohde & Schwarz

1. Il concorso a premi “10 anni di oscilloscopi Rohde & Schwarz” (di seguito il “Concorso”) è organizzato da Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Monaco di Baviera, Germania, Tel. +49 89 41 29 0 (di seguito “R&S).

2. Tutti i partecipanti possono registrarsi al concorso dal 1 gennaio 2020 al 31 dicembre 2020 comunicando il loro nome, azienda e indirizzo e-mail lavorativo.

3. La partecipazione al concorso è gratuita e non è legata all’acquisto di alcun bene o servizio.

4. Il concorso è aperto alle sole persone giuridiche e solo le persone giuridiche potranno vincere i premi. Non è ammessa la partecipazione delle persone fisiche col proprio nome e account, ma un rappresentante di una persona giuridica può compilare il modulo di partecipazione in nome e per conto della persona giuridica.

5. Il premio è costituito da un oscilloscopio R&S®RTB2000 tra i 10 messi in palio nel periodo dal 1 gennaio 2020 al 31 dicembre 2020:

Premio: 1 oscilloscopio digitale R&S®RTB2000

6. L’estrazione avrà luogo nella sede di Rohde & Schwarz di Muehldorstrasse 15, 81671 Monaco di Baviera. Il vincitore di un premio sarà informato via e-mail entro cinque (5) giorni lavorativi.

7. Il rappresentante autorizzato dalla persona giuridica dovrà informare Rohde & Schwarz della volontà di accettare il premio. In caso di mancata accettazione o di mancata risposta entro due (2) settimane, verrà estratto un nuovo vincitore. Se non si potrà identificare un vincitore entro quattro (4) settimane, il concorso avrà termine e il premio non verrà assegnato.

8. I dipendenti di R&S, i membri delle loro famiglie e le persone coinvolte nel processo di estrazione e i membri delle loro famiglie sono esclusi dalla partecipazione.

9. Non è previsto alcun equivalente in denaro o permuta del premio. I premi non son trasferibili. Tutte le eventuali tasse, imposte, tributi o altri addebiti dovuti nel paese di residenza saranno a carico del partecipante al concorso.

10. I dati personali verranno trattati al solo scopo dell’estrazione del premio e cancellati dopo quattro (4) settimane dall’estrazione, salvo diverso accordo.

11. Ogni partecipante che non rispetta quanto indicato in questi Termini & Condizioni potrà essere squalificato da R&S da questo Concorso. In tali casi, i premi potranno anche essere ritirati retrospettivamente. Qualora un premio venga ritirato retrospettivamente a causa del non rispetto di questi Termini & Condizioni, dovrà essere reso dal vincitore a sue spese, inviandolo all’indirizzo di R&S indicato al punto 1, dopodiché verrà determinato in nuovo vincitore.

12. I partecipanti non potranno richiedere i premi di questo concorso e non è ammesso alcun ricorso legale a questo proposito.

13. Il concorso ed ogni altro legame contrattuale di conseguenza derivante tra R&S e il rispettivo partecipante sarà regolato della legge tedesca, senza possibilità di ricorso in caso di conflitto tra legislazioni. Il tribunale di Monaco di Baviera avrà giurisdizione esclusiva in caso di ogni disputa diretta o indiretta derivante dalla partecipazione a questo Concorso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.