Mar 04, 2025 | Comunicato stampa | Wireless communications

To showcase the potential of network energy saving (NES) in open radio access networks (O-RAN), Rohde & Schwarz and VIAVI Solutions have collaborated with Analog Devices. At Mobile World Congress 2025 in Barcelona, visitors can experience the joint O-RU test solution of the two T&M companies as it verifies the low power consumption of Analog Devices’ new Titan O-RU platform according to ETSI specifications. These network energy saving tests help to significantly reduce energy consumption and OPEX in O-RAN integrations.

Jun 19, 2023 | Comunicato stampa | Wireless communications

At the i14y Lab, Rohde & Schwarz, VIAVI and Benetel combined their industry-leading capabilities to showcase their integrated, automated testing solution for the conformance testing of O-RAN radio units (O-RUs). This solution was used to test the commercial grade 4T4R RAN650 O-RU from Benetel according to O-RAN ALLIANCE and 3GPP specifications.

Apr 07, 2025 | Comunicato stampa | Aerospace and defense

The IFATSEA Euro Conference 2025 will take place from April 24 to April 26 in Zurich, Switzerland. Rohde & Schwarz, as a Gold Sponsor, will showcase its R&S EVSD1000 VHF/UHF navigation drone analyzer at the accompanying exhibition as a key higlight.

Jul 30, 2024 | Comunicato stampa | Test & measurement

Calian will be taking over the Rohde & Schwarz DOCSIS portfolio, consisting of the R&S DSA, R&S CLGD and R&S SFD. Calian will now develop and distribute the portfolio, strengthening its position in this industry. Contractual agreements have been made between the two partners to ensure a smooth transition for existing customers.

Jul 02, 2025 | Comunicato stampa | Corporate

Effective July 1st 2025, the technology group Rohde & Schwarz has acquired ZES ZIMMER Electronic Systems GmbH. The privately owned company based in Oberursel, Hesse, has been designing, developing and manufacturing high-precision power measurement equipment for four decades. The acquisition complements the Rohde & Schwarz test and measurement product portfolio. This is an important step that contributes to the company's long-term growth strategy and will benefit the customers of both companies.

Mar 28, 2024 | Comunicato stampa | Wireless communications

Rohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.

Mar 04, 2025 | Comunicato stampa | Broadcast and Media

Rohde & Schwarz has announced the transfer of its renowned Clipster mastering solution to CineCert, a trusted expert in digital cinema. This marks a new chapter for Clipster, the gold standard for mastering.

Jun 28, 2023 | Comunicato stampa | Wireless communications

Rohde & Schwarz in collaboration with Qualcomm Technologies, Inc., will conduct a comprehensive set of tests for NB-IoT over non-terrestrial networks (NTN) to accurately verify two-way internet of things (IoT) data across various operating modes using GSO and GEO constellations in line with the 3GPP Release 17. At the MWC Shanghai 2023, Rohde & Schwarz will hold a live demonstration of the test solution at the company’s booth with Qualcomm Technologies’ NTN Release 17 IoT chipsets.

Dec 04, 2023 | Comunicato stampa | Wireless communications

The R&S TS8991 over-the-air (OTA) test system from Rohde & Schwarz is the first to be approved by CTIA Certification for testing 5G A-GNSS antenna performance. This solution measures the performance of the global navigation satellite system (GNSS) receiver in a wireless device. This is critical because Assisted-GNSS is used for E911 emergency calls over 5G.

Dec 19, 2024 | Comunicato stampa | Automotive

Rohde & Schwarz, a global leader in test and measurement solutions, is excited to unveil its latest innovations and demonstrations at CES 2025. Renowned for its pivotal role in the automotive ecosystem, Rohde & Schwarz consistently makes significant contributions to advancing the industry’s vision of autonomous driving, electrification, and connectivity.

Mar 07, 2024 | Comunicato stampa | Test & measurement

With the latest model of the R&S FSPN phase noise analyzer and VCO tester, Rohde & Schwarz extends the frequency range for measurements from the previous maximum of 26.5 GHz up to 50 GHz.

Jul 31, 2025 | Comunicato stampa | Broadcast and Media

Innovative, efficient and future-ready technology for next gen broadcasting

Aug 25, 2025 | Comunicato stampa | Test & measurement

In an efficient collaboration, Rohde & Schwarz has developed the first integrated testing solution for the Taiwan Space Agency (TASA), enabling seamless EMC and antenna measurements within a single chamber. The project underscores the growing demand for advanced satellite testing systems as Non-Terrestrial Network technologies evolve.

Feb 26, 2025 | Comunicato stampa | Automotive

u-blox, a leading global supplier of GNSS modules, and Rohde & Schwarz have successfully validated u-blox’s latest automotive GNSS module in accordance with the recently published Chinese GB/T test requirement for automotive on-board GNSS positioning systems using an automated R&S SMBV100B based GNSS simulator solution. This cutting-edge solution will be demonstrated at Mobile World Congress 2025 in Barcelona.

Aug 01, 2024 | Comunicato stampa | Broadcast and Media

Uncompromised quality and reliability coupled with simplicity and efficiency

Dec 06, 2023 | Comunicato stampa | eCall

Applus Laboratories and Rohde & Schwarz have successfully showcased the seamless integration of eCall testing in an electromagnetic compatibility (EMC) test environment. The demonstration illustrated different eCall testing scenarios and capabilities in compliance with the UN ECE R10 standard, which regulates automobile-related EMC.

Jun 24, 2024 | Comunicato stampa | Artificial intelligence & Machine learning

Rohde & Schwarz has become the latest member of the recently formed AI-RAN Alliance. As a global leader in wireless testing, the company will contribute its T&M expertise to this new collaborative initiative, which aims to integrate artificial intelligence (AI) into wireless communications to advance radio access network (RAN) performance and mobile networks. The membership marks a significant milestone for Rohde & Schwarz on the road to 6G and takes its ongoing collaboration with industry leaders on AI-native air interfaces to a new level.

Apr 23, 2024 | Comunicato stampa | Test & measurement

Available with four frequency options each covering from 8 kHz to 12.75 GHz, 20 GHz, 31.8 GHz or 40 GHz, the new R&S SMB100B microwave signal generator from Rohde & Schwarz brings excellent output power, spectral purity, very low close-in phase noise, and practically no wideband noise to analog microwave signal generation.

Jun 05, 2024 | Comunicato stampa | Test & measurement

The USB Implementers Forum (USB-IF) has approved the USB 3.2 Gen 1 & Gen 2 transmitter and receiver compliance test solution from Rohde & Schwarz, confirming that it meets the stringent requirements set by the standardization body. Manufacturers of USB devices preparing for official USB-IF certification can have full confidence in the accuracy and reliability of the test results produced by the test solution.

Sep 13, 2023 | Comunicato stampa | Automotive

The radar test system from Rohde & Schwarz simulates driving scenarios for testing radar based advanced driver assistance systems (ADAS) and radar sensors used in automated driving cars (AD) entirely over the air. Now Rohde & Schwarz introduces new options for the R&S AREG800A automotive radar echo generator and the R&S QAT100 antenna array. The system is able to generate extremely short distances for the artificial objects, and therefore enables realistic autonomous braking tests with the smallest distance possible on the market.

Dec 20, 2024 | Comunicato stampa | Automotive

Rohde & Schwarz has collaborated with Analog Devices, Inc. (ADI) to create a wide range of tests for Gigabit Multimedia Serial Link (GMSL) devices. The GMSL technology from ADI provides a cost-efficient, scalable, and simple SerDes solution designed to improve performance for high-speed video links, primarily used in In-Vehicle Infotainment (IVI) and Advanced Driver-Assistance Systems (ADAS) in vehicles. The collaboration will enable engineers, developers and manufacturers to create and deploy GMSL-based ADAS and IVI systems rapidly.

Mar 28, 2025 | Comunicato stampa | Security Scanner

Rohde & Schwarz, a global leader in security screening, is proud to announce the installation of its 2000th QPS201 unit to Kansai International Airport (KIX). The project was invaluably supported through its local partner Teikoku Sen-I Co., Ltd (TEISEN). This significant milestone reflects the growing demand for advanced security solutions in the aviation sector.

Mar 06, 2025 | Notizie online | Test & measurement

Returning in April 2025, the popular Oscilloscope Days event provides essential information to support design engineers with day-to-day test challenges, and insights into how to stay ahead in a world that is increasingly embracing electrification and digitalization. The two half-day virtual event includes online theoretical and practical sessions, application-oriented presentations and interactive discussions with experts from Rohde & Schwarz and event partners.

Feb 27, 2025 | Comunicato stampa | UWB

NXP Semiconductors, an innovator and supplier of Ultra-Wideband (UWB) solutions, and Rohde & Schwarz collaborate to demonstrate a test setup for UWB radar target simulation at the upcoming Mobile World Congress in Barcelona. The demonstration, being the first of its kind, verifies the unique performance of the NXP Trimension™ NCJ29D6A chipset including the enhanced radar algorithms. It is capable of generating UWB radar targets with a variable target distance down to a few centimeters, enabling maximum control and reproducibility of the simulated scenario.

Jun 01, 2023 | Comunicato stampa | Wireless communications

Rohde & Schwarz has successfully validated 5G RedCap (reduced capability) test cases for its R&S CMX500 one-box signaling tester and R&S TS8980 conformance test system for the recent Conformance Agreement Group (CAG) #74 meeting, allowing the Global Certification Forum (GCF) to activate the respective work items in their device certification program. Manufacturers of IoT chipsets, modems and end devices as well as test houses can now rely on tried-and-tested Rohde & Schwarz solutions for 387 5G RedCap test cases in all device production stages, from early R&D to type approval conformance testing.

May 22, 2025 | Comunicato stampa | Test & measurement

Zurich Instruments, a market leader in developing and marketing qubit control and readout electronics for quantum computers, and its parent company Rohde & Schwarz, have been selected as key partners in the National Quantum Computing Testbed Facility (NQCT) project in Queensland, Australia.

Feb 26, 2025 | Comunicato stampa | Wireless communications

Rohde & Schwarz presents the CMX500 AI Scripting Assistant, a novel solution revolutionizing mobile device testing. The AI-powered tool for the CMX500 5G one-box signaling tester simplifies and accelerates the scripting process for test engineers who deal with the complexities of script generation from diverse sources. The assistant provides users a tailored and efficient approach for automating domain-specific applications such as R&D 5G NR protocol testing, application testing, or instrument automation.

Jan 20, 2025 | Comunicato stampa | Test & measurement

Rohde & Schwarz launches its novel wideband modulated load pull solution. Based on the R&S RTP oscilloscope, this solution offers an extension to traditional vector network analyzer (VNA)-based solutions for non-linear device characterization. By enabling load pull with wideband modulated signals, it allows precise validation of key performance indicators across varying impedances, such as error vector magnitude (EVM) and adjacent channel leakage ratio (ACLR), to support the development of RF components for next-generation wireless technologies.

Jul 09, 2024 | Comunicato stampa | Wireless communications

EMITE and Rohde & Schwarz continue their collaboration to enhance EMITE’s Over-the-Air (OTA) measurement solutions by fully integrating the latest test capabilities of the R&S CMX500 multi-technology, multi-channel one-box signaling tester. The integration enables besides support of LTE, FR1 and FR2 also full compliance with the cutting-edge WLAN standard IEEE 802.11be as well as 5G RedCap.

Oct 24, 2024 | Comunicato stampa | Broadcast and Media

Competitive search leads Toledo’s WLMB-TV 40 to TE1 based on energy efficiency and durability