The R&S®BBL200 is a liquide cooled broadband amplifier for high power application up to 10 kW P1dB in the frequency range of 9 kHz to 250 MHz.

The R&S®BBA300 is a robust, compact, ultra-wide band amplifier for use in critical test environments such as EMC, product validation and OTA coexistence in the frequency range of 380 MHz to 18 GHz and RF output power up to 300 W P1dB.

The R&S®SAM100 system amplifier - an ultra-broadband solid state microwave amplifier with outstanding linearity and very good noise characteristics in frequency range from 2 GHz to 20 GHz.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 port and 4 port models available. ZN-Z51 has configurable test ports.

The R&S®RTM3000 oscilloscope offers a 10.1" capacitive display, 10-bit ADC and up to 400 Msample memory depth. Available in bandwidths from 100 MHz to 1 GHz.

R&S RS5400 radio server – aggregate and split voice streams to optimize bandwidth utilization to and from remotely controlled radio sites

The R&S®BBA130 is the first tunable class A/AB broadband amplifier for the frequency range of 80 MHz to 6 GHz and rf output power up to 13000 W.

The R&S®BBA150 is a robust broadband amplifier for EMC applications in the frequency range of 4 kHz to 6 GHz and rf output power up to 3000 W P1dB.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

Noise figure measurement with vector network analyzers

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

Disturbance voltage measurements in the frequency range 9 kHz to 30 MHz

The R&S®RTB 2 oscilloscope is the perfect tool for university laboratories, production and service departments. See more signal details with the power of 10.

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

Network analyzer waveguide calibration kits, up to 1100 GHz, models with sliding match.

R&S®FSH handheld spectrum analyzer: the all-in-one handheld platform for installation and maintenance in the field. It has a frequency range from 9 kHz to 3.6/4/8/13.6/20 GHz. Models with and without an internal tracking generator and VSWR bridge are available.

The R&S®RTC1000 oscilloscope has a wide range of functions that address a broad group of users. Explore its state-of-the-art, high-performance technology.

The R&S®RTA4000 oscilloscope is designed for top-class signal integrity and responsive ultra-deep memory. See more of your signals with the power of 10.

The R&S®TSMx drive and walk test scanner features optimization, troubleshooting and mobile coverage measurements with non-intrusive scanner measurements. Find out more.

The R&S®ZNL is a cost-efficient, portable vector network and spectrum analyzer, ideal for development, production and in the field