R&S®ZN-ZCG Comb generator

R&S®ZNA의 정밀 위상 교정을 위한 설계

R&S®ZN-ZCG Comb generator
Show me more details
R&S®ZN-ZCG Comb generator
Show me more details
R&S®ZN-ZCG Comb generator
Show me more details
R&S®ZN-ZCG Comb generator
Show me more details
R&S®ZN-ZCG Comb generator
Show me more details

주요 사항

  • 비선형 대규모 신호 분석을 위한 증폭기 고조파의 위상 측정값 정밀 교정
  • LO(Local Oscillator) 접근이 가능한 DUT에 대한 주파수 변환 위상 및 지연 측정
  • NIST(National Institute of Standards and Technology) 소급성을 제공하는 정확하고 신뢰할 수 있는 교정
  • 독립하여 작동 가능(R&S®ZNA 컨트롤과 분리), SCPI 사용 시 LAN 인터페이스를 통한 시스템 통합 가능

R&S®ZNA 기반의 고성능 증폭기 및 컨버터 테스트의 새로운 이정표 제시

10 MHz부터 44 GHz 및 67 GHz까지의 주파수 대역을 지원하는 두 가지 모드

R&S®ZN-ZCG Comb Generator는 R&S®ZNA Vector Network Analyzer의 정밀 위상 교정을 위해 설계되었습니다. 이 제품은 주파수 고조파의 위상 정보가 정의된 스펙트럼을 생성하여 Wideband 수신기에서 위상 교정을 위한 레퍼런스 신호를 제공합니다. 또한 검증 완료된 R&S ZNA SMARTerCal 기술을 적용하며 직관적인 그래픽 사용자 인터페이스를 통해 일반적인 교정 유닛과 같은 방식으로 모든 ZNA 포트를 간편하게 교정할 수 있습니다.

기능 및 장점

단일 연결로 Complementary Wideband 위상 교정 수행

R&S®ZN‑ZCG로 고조파 및 믹서 사이드밴드 위상 테스트를 간소화하십시오

고조파 또는 믹서 사이드밴드 위상 교정 시에는 별도의 하드웨어를 추가해야 하는 경우가 많아 셋업이 복잡해지는 문제가 있습니다. R&S®ZNA 포트에 한 번만 연결하는 방식으로 구현된 R&S®ZN‑ZCG는 복잡한 과정을 간소화합니다. RF 출력이 10 MHz에서 44/67 GHz까지 대응하며 R&S®SMARTerCal과 연동하므로 모든 측정 및 레퍼런스 수신기를 한 단계만 거쳐 교정할 수 있습니다. 교정이 완료되면 모든 포트에서 측정이 가능해 효율성을 극대화하고 워크로드를 최소화합니다.

Show me more details

R&S®ZNA 오차 보정 개념에 완벽한 통합

R&S®ZN‑ZCG 사용 시 위상 교정 절차가 R&S®ZNA 워크플로우에 기본적으로 포함됨

R&S®ZN‑ZCG는 R&S®ZNA 오차 보정 과정에서 바로 사용 가능하며, 내장형 GUI 제어 기능을 사용하므로 별도의 추가 절차가 필요하지 않습니다. SMARTerCal을 통해 단일 포트 연결이 가능하며 모든 수신기를 자동으로 교정할 수 있습니다. 교정을 빠르고 효율적으로 수행할 수 있으며 측정 가능 상태에 방해가 되지 않습니다.

최적화 기능

정밀 Wideband 위상 교정을 위해 더욱 진보된 최적화

R&S®ZN‑ZCG는 고속 펄스 발생기와 같은 기능을 수행하여 동일 간격의 펄스를 생성하고 빗 모양의 스펙트럼으로 변환합니다. 각 스펙트럼 라인의 크기와 위상은 특성이 정의된 상태로 출고되며 R&S®ZNA의 모든 수신기를 정밀 교정하기 위한 기준이 됩니다. 20 ps 미만의 펄스 폭을 지원하고 주파수 간격을 1 MHz - 100 MHz 범위 또는 최대 2 GHz까지 범위에서 사용자 정의할 수 있어 다양한 셋업에 적합한 적용이 가능합니다.

간단한 시스템 통합으로 다양한 애플리케이션에 활용

R&S®ZN‑ZCG로 복잡한 과정 없이 시스템에 간단히 통합 가능

R&S®ZN‑ZCG는 증폭기 LSA, 믹서 테스트, 임베딩/디임베딩 및 파형 복원 등 다양한 애플리케이션에서 신뢰할 수 있는 고조파 위상 분석을 지원하는 정밀 위상 교정 기능을 제공합니다. 전체 주파수 대역은 물론 특정 테스트 셋업 대역까지 지원하는 유연한 교정 기능을 통해 까다로운 RF 애플리케이션에서도 정밀한 시스템 통합형 분석 결과를 얻을 수 있습니다.

세 가지 작동 모드

다양한 용도를 지원하는 세 가지 모드로 유연한 작동

R&S®ZN‑ZCG는 세 가지 작동 모드를 제공합니다.

  • R&S®ZNA 시스템 오차 보정(Wideband 위상 교정 추가)
  • 검증 및 최적화를 위한 평가
  • 독립형 운용 및 시스템 통합

사용 가능한 모델

정보 요청

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.
For service/support requests, please go here to log in or register.

마케팅 동의

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.