R&S®CMP180 radio communication tester

Enhanced frequency and bandwidth for advanced wireless technologies

R&S®CMP180 radio communication tester
라이트박스 열기
R&S®CMP180 radio communication tester
라이트박스 열기
R&S®CMP180 radio communication tester
라이트박스 열기
R&S®CMP180 radio communication tester
라이트박스 열기
R&S®CMP180 radio communication tester
라이트박스 열기
R&S®CMP180 Radio Communication Tester, Front LowR&S®CMP180 Radio Communication Tester, Side viewR&S®CMP180 Radio Communication Tester, Front HighR&S®CMP180 Radio Communication Tester, Back highR&S®CMP180 Radio Communication Tester, Side view

주요 사항

  • Frequency up to 8 GHz and bandwidth of 320 MHz
  • Two independent RF channels (2x VSA / 2x VSG)
  • Increased number of RF ports (2x8)
  • Self-alignment function - on-site calibration
  • Compact design of 2 HU and 19″

The future integrated

The R&S®CMP180 radio communication tester is a future-proof, non-signaling testing solution for wireless devices in research and development, validation and production. Together with advanced frequency, bandwidth and RF capabilities, it enables testing of new wireless technologies such as Wi-Fi 6E, Wi-Fi 7, 5G NR FR1 and many more. Additionally, the doubled number of analyzers (2xVSA), generators (2xVSG) and RF ports (2x8) enable simultaneous measurements of technologies and devices in a VSA/VSG single-box tester.

기능 및 장점

Excellent RF parameters

Enables Wi-Fi 6E (WLAN 802.11ax) / Wi-Fi 7 (WLAN 802.11be) & 5G FR1 testing

The R&S®CMP180 enables Wi-Fi 6E (WLAN 802.11ax) / Wi-Fi 7 (WLAN 802.11be) & 5G FR1 measurements with a frequency range up to 8 GHz and a bandwidth of up to 320 MHz and high output power.

Future-proof hardware - ready for MIMO

Scalable for future technologies, applications and requirements

The R&S®CMP180 provides sufficient frequency, bandwidth and EVM performance even for testing of future technologies:

  • Frequency up to 8 GHz
  • Bandwidth up to 320 MHz
  • Class-leading EVM performance
  • MIMO ready (NR FR1 and higher order True MIMO (WLAN))
  • High output power for OTA measurements
 

High output power for OTA measurements
라이트박스 열기

High output power for OTA measurements

R&S®CMP180 - MIMO ready (NR FR1 MIMO & higher order TrueMIMO (WLAN))

One instrument to test the entire product lifecycle

From EVT via DVT to MP

Current development and production lines for wireless devices must provide an optimum combination of flexibility, performance and capacity utilization as well as software re-utilisation. The R&S®CMP180 is more than a mass production tester. Test engineers can use the instrument throughout the entire development phase, from engineering validation tests (EVT), design validation tests (DVT) and production validation tests (PVT) to mass production (MP).

Self-alignment, on-site calibration and service

Easy calibration using the self-alignment function

The R&S®CMP180 supports on-site calibration with an integrated self-alignment function, enabling engineers to calibrate the tester. Additionally, Rohde & Schwarz subsidiaries around the world meet any service demands.

Integrated self-alignment function
라이트박스 열기

Integrated self-alignment function

Waveform ARB generator

Generate analog and digital signals

Run existing turnkey waveforms for different technologies and generate and run your own waveforms via R&S®WinIQSIM2.

Uniform and intuitive operation

Discover the integrated user interface - R&S®CMsquares

The R&S®CMsquares is a unified test software solution with a browser-based user experience, combining everything that is required for wireless technology testing. From test configuration, parameterization, measurements as well as test execution in a single environment, with a dashboard style and quick access to different types of applications, it can control all new radio communication testers via a standardized GUI for a unified experience.

R&S®CMsquares
라이트박스 열기

R&S®CMsquares

Enabling uniform operation with the same software for all device testers

Parallel testing of multiple devices & technologies

Optimize utilization and reduce measuring sites

The smart channel function divides the tester into multiple sub-instruments, allowing the tester to share its hardware (VSA / VSG / RF ports) with multiple DUTs, enabling parallel testing of multiple devices and technologies.

Production testing for Wi-Fi® / NR FR1 / 7.125 GHz

Wi-Fi® / NR FR1 / 7.125 GHz 대응 생산 테스트

Cellular 기기 테스트

R&S®CMP180 Radio Communication은 Wi-Fi 6E, Wi-Fi 7, 5G FR1과 다양한 기술에 대한 차세대 R&D 및 생산을 위한 논시그널링 테스트 플랫폼입니다.

테스트 엔지니어에게 R&S®CMP180은 엔지니어링 검증 테스트부터 설계 검증 테스트, 생산 검증 테스트, 대량 생산에 이르는 개발 단계 전체에 사용할 수 있는 유용한 기기입니다.

웹세미나: Are you ready for Wi-Fi 6E/7 testing? We are!

웹세미나

Are you ready for Wi-Fi 6E/7 testing? We are!

이 웹세미나에서는 다음에 대해 배웁니다.

  • Wi-Fi 6E 기술 특징 및 규정 업데이트
  • Wi-Fi 7 기술 전망
  • Wi-Fi 6E, Wi-Fi 7 등에 대한 테스트 솔루션

정보 요청

질문이 있거나 추가 정보가 필요하십니까? 이 양식에 맞춰 내용을 입력해 주시면 회신 드리겠습니다.

로데슈바르즈에서 다음과 같은 방법으로 정보를 수신하겠습니다

마케팅 동의

이것이 의미하는 바는 무엇입니까?

Rohde & Schwarz GmbH & Co. KG 및 본 웹사이트에서 명기하는 Rohde & Schwarz 법인 혹은 지사에서
테스트 및 계측, 보안 통신, 모니터링 및 네트워크 테스트, 방송 및 미디어, 사이버 보안 분야의 제품, 솔루션과 관련된 마케팅 및 광고 목적(예: 특별 행사 및 할인 프로모션에 대한 정보)을 위해 선택한 채널(이메일 또는 우편)을 통해 연락하는 데 동의합니다.

이용자의 권리

이 동의 선언은 news@rohde-schwarz.com에 "Unsubscribe"라는 제목으로 이메일을 보내 언제든지 취소할 수 있습니다. 또한 전송되는 각 이메일에 향후 이메일 광고에 대한 구독 취소 링크가 포함되어 있습니다. 개인 데이터 사용 및 해지 절차에 대한 자세한 내용은 "개인정보 보호정책"에 명시되어 있습니다.

신청하신 내용이 제출되었습니다. 빠른 시일 내 회신 받으실 것입니다.
An error is occurred, please try it again later.
일반 정보 및 법정 정보

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.