Feb 21, 2024 | Пресс-релиз | eCall

Quectel Wireless Solutions, a global IoT solutions provider, and Rohde & Schwarz have successfully validated Quectel’s innovative 5G eCall module, part of the AG56xN series of automotive modules. For the test, the R&S CMX500 wideband radio communication tester has been used. The test setup will be shown at Mobile World Congress 2024.

Mar 05, 2025 | Пресс-релиз | Wireless communications

The next Bluetooth® release is expected to be ratified soon. One important new feature is the Unified Test Protocol (UTP) Test Mode for Bluetooth® Low Energy, that will complement existing test methods. The UTP Test Mode will additionally enable over-the-air (OTA) controlled device testing, which will simplify measurements of small and highly integrated devices enormously, since no direct wired connection to the tester is needed. Rohde & Schwarz and Ceva, in close cooperation, have developed the world’s first test solution for this new test mode, making its debut at embedded world 2025.

Feb 22, 2024 | Пресс-релиз | Non-terrestrial networks (NTN)

Rohde & Schwarz and MediaTek have teamed up to demonstrate a 5G non-terrestrial network (NTN) new radio (NR) connection based on the latest 3GPP Release 17 specifications. This technological advancement will be presented at this year's Mobile World Congress in Barcelona using the state-of-the-art R&S CMX500 one-box signaling tester (OBT) from Rohde & Schwarz and MediaTek's NTN-NR device as DUT. 5G NTN-NR is the next phase of NTN technology in which smartphones and other 5G devices will be directly linked with satellite-based services.

Apr 04, 2024 | Пресс-релиз | Test & measurement

A new family of Rohde & Schwarz power analyzers is now available in three models to meet all requirements for measuring voltage, current, power and total harmonic distortion on both DC and AC sources. The R&S NPA101 power meter provides all basic measurements, the R&S NPA501 power analyzer adds enhanced measurement functions and graphical analysis, and the R&S NPA701 compliance tester includes evaluation functions in line with IEC 62301 and EN 50564 for power consumption and EN 61000-3-2 for EMC harmonic emission testing.

Aug 01, 2024 | Пресс-релиз | Broadcast and Media

Rohde & Schwarz to demonstrate energy-efficient technology innovation at IBC2024 Stand 7.B21, IBC2024 RAI Amsterdam, 13-16 September 2024: Rohde & Schwarz is bringing the latest technologies in television and radio transmission to IBC 2024. The company will show how innovative designs are delivering unprecedented efficiency for transmitters and enabling broadcast network operators to address new business

Oct 22, 2025 | Пресс-релиз | Corporate

Rohde & Schwarz and TRUMPF have agreed on a strategic partnership to develop and deploy a comprehensive, sovereign counter-drone solution. The technology companies will pool their expertise to provide effective defense against the growing threat of unauthorized drones.

Feb 21, 2024 | Пресс-релиз | Non-terrestrial networks (NTN)

Rohde & Schwarz has reached a major milestone: its NTN Netop test solutions have been accepted as part of Skylo’s NTN Certification Program.

Mar 20, 2025 | Пресс-релиз | Test & measurement

The new EMI test receivers R&S EPL1001 up to 1 GHz and R&S EPL1007 up to 7.125 GHz offer engineers a flexible and cost-effective solution for EMI measurements. Their expandable features support optimized and secured investments, as additional options can be integrated at any time as needed. Depending on the configuration, these receivers can be used for measurements during the development phase, certification preparation and final testing to ensure compliance with latest EMI standards.

Mar 06, 2025 | Пресс-релиз | Test & measurement

Rohde & Schwarz is set to present a comprehensive suite of EMC and field strength test equipment at the EMV show 2025 in Stuttgart from March 25 to 27, 2025. The display will include standalone instruments, software, and systems designed to meet various industry standards. The solutions support commercial, automotive, military and aerospace standards, as well as ETSI and FCC standards. Visitors can witness these innovative demonstrations at booth number 615.

Feb 13, 2024 | Пресс-релиз | Automotive

Autotalks, a world leader in V2X (Vehicle-to-Everything) communication solutions, has used test expertise and equipment from Rohde & Schwarz to verify the performance of their third-generation V2X chipset. TEKTON3 and SECTON3 were verified using the latest 5G-V2X capability of the R&S CMP180 radio communication tester. The two companies will present jointly a 5G-V2X test setup at Mobile World Congress 2024 in Barcelona.

Apr 24, 2024 | Пресс-релиз | Automotive

Rohde & Schwarz has teamed up with IPG Automotive, a pioneer in virtual test driving, to redefine automotive radar Hardware-in-the-Loop (HIL) integration testing and thereby reducing the cost by bringing Autonomous Driving (AD) testing from the proving ground to the development lab. Combining the CarMaker simulation software from IPG Automotive with the R&S AREG800A radar object simulator and the R&S QAT100 advanced antenna array provides vehicle manufacturers with the ability to simulate ADAS/AD scenarios like those defined in the Euro NCAP in a controlled, safe, time-efficient and cost-reducing way. This combination provides automotive OEMs and radar sensor suppliers with a comprehensive radar sensor testing platform. It is applicable for validation and real-time, closed-loop characterization of radar sensors and enables compliance with Association for ASAM standards.

Mar 03, 2025 | Пресс-релиз | Test & measurement

Murata Manufacturing is launching the world’s first Digital Envelope Tracking (Digital ET) technology. This advanced technology has the potential to considerably reduce power consumption of advanced RF circuits for 5G and future 6G devices, contributing towards more energy efficiency in various applications. Rohde & Schwarz and Murata have combined their technology and expertise to develop a sophisticated RF measurement setup that demonstrates the capabilities of this novel Digital ET technology.

Sep 20, 2024 | Пресс-релиз | Automotive

Rohde & Schwarz introduces new options for its automotive radar target simulator R&S AREG800A. The new R&S AREG-P creates and enables an environment for a seamless transition of automotive radar sensor from R&D to production. Used standalone or as turnkey solution together with NOFFZ integrating the AREG-P into their production test systems, enables Tier1 automotive radar suppliers to increase throughput, reduce test time and optimize costs of end-of-line tests.

Sep 05, 2023 | Пресс-релиз | Wireless communications

Reconfigurable intelligent surfaces (RIS) are drawing attention in the wireless industry due to their potential for an efficient 5G mmWave rollout as well as future 6G applications. A measurement campaign by Rohde & Schwarz and Greenerwave recently characterized the configurable radio wave reflection properties of a novel FR2 RIS module developed by Greenerwave with an over-the-air (OTA) antenna test system from Rohde & Schwarz. It is one of the first real measurements confirming that a metamaterial-based RIS can improve the coverage and efficiency of wireless communications performance, especially for 5G FR2. The groundbreaking work will pave the way for further 6G developments.

Mar 12, 2025 | Пресс-релиз | Broadcast and Media

Successful deployment of the R&S®THU9evo and R&S®TMU9evo transmitters in key cities marks a significant milestone in Paraguay's digital transition

May 23, 2023 | Пресс-релиз | Test & measurement

The R&S SMW200A and R&S SMM100A vector signal generators and the R&S FSW and R&S FPS signal and spectrum analyzers from Rohde & Schwarz have been approved by Qualcomm for testing the Qualcomm® QRU100 5G RAN Platform – an O-RAN compliant solution with architecture flexibility designed to facilitate scalable and cost-effective 5G network deployments. OEMs providing RUs for Open RAN infrastructure adopting the Qualcomm QRU100 5G RAN Platform can be confident that these Rohde & Schwarz solutions meet the necessary sub-6 GHz test requirements for design verification and production.

May 27, 2024 | Пресс-релиз | Test & measurement

Rohde & Schwarz will showcase its latest solutions for power electronics testing at PCIM Europe in Nuremberg from June 11 to 13. This year, the spotlight will be on solutions that address the challenges of testing and debugging the next generation of wide bandgap semiconductors in power electronic converters. The company’s experts will share their first-hand knowledge of applications such as inverter drive design, double pulse testing and EMI debugging, utilizing cutting-edge test instruments from Rohde & Schwarz.

Nov 26, 2024 | Пресс-релиз | Wireless communications

Rohde & Schwarz and ETS-Lindgren continue their long standing partnership to deliver comprehensive over the air (OTA) testing solutions for next generation wireless technologies. ETS-Lindgren has integrated the CMX500 one box signaling tester and R&S SMBV100B vector signal generator from Rohde & Schwarz into its EMQuest™ software. This collaboration supports the latest standards, including 5G FR1, 5G FR2, Wi Fi 7 and A-GNSS.

Jun 06, 2024 | Пресс-релиз | Wireless communications

The United States Department of Commerce will provide funding to promote the deployment of open networks in the U.S. and abroad. Rohde & Schwarz and VIAVI offer joint test solutions to meet the needs of radio equipment manufacturers who plan to apply for the funding.

Feb 15, 2024 | Пресс-релиз | Broadcast and Media

Rohde & Schwarz contributes for its 13th consecutive year to the success of the Berlin International Film Festival, delivering its market-leading R&S®Clipster mastering solution and reliable R&S®SpycerNode production storage.

Oct 30, 2025 | Пресс-релиз | Wireless communications

Industry leaders collaborate on TC-DFT-s-OFDM waveform testing to advance next-generation wireless technology development.

Sep 23, 2024 | Пресс-релиз | Automotive

Next-generation radar, pivotal for the evolution of ADAS and autonomous driving, requires test solutions that deliver unrivalled accuracy, efficiency and reliability. To drive this development further, Rohde & Schwarz launches a radical innovation in automotive radar testing. R&S RadEsT (Radar Essential Tester) automotive radar target simulator emerges as an ultra-compact versatile tool designed to meet a wide array of testing needs along radar sensors lifecycle, from lab-based functional testing to vehicle-level production checks, offering the industry a hitherto unseen price-performance point.

Nov 03, 2025 | Пресс-релиз | Wireless communications

AI-powered receiver technology using machine learning can greatly enhance future 6G coverage, creating cost savings and accelerating time to market. The AI technology identifies and compensates for distortion in wireless signals, leading to substantial improvements in 6G uplink coverage. Nokia and Rohde & Schwarz will demonstrate the technology at the Brooklyn 6G Summit from November 5-7.

Feb 10, 2025 | Пресс-релиз | Wireless communications

SPEAG and Rohde & Schwarz expand their long-term collaboration with the combination of the CMX500 wideband radio communication tester with the DASY8-3D utilising the enhanced DASY8 Application Programming Interface. This combination allows manufacturers of wireless devices to perform Specific Absorption Rate tests of 5G FR1 devices using the future-proof CMX500 multi-technology, multi-channel one-box signaling tester.

Feb 19, 2025 | Пресс-релиз | Test & measurement

Kyocera has developed an innovative mmWave phased array antenna module (PAAM) that simultaneously creates multiple beams in different directions at different frequencies. These PAAMs will be used in 5G FR2 infrastructure installations, enabling for example site co-location of different operators running networks on different frequency bands. To ensure optimal beam steering and beam directivity of their groundbreaking product, Kyocera relies on CATR-based multi-reflector OTA testing technology from Rohde & Schwarz.

Jun 17, 2025 | Пресс-релиз | Test & measurement

Rohde & Schwarz has updated the R&S FSWP for upcoming applications. The new option R&S FSWP-B56G extends the frequency range up to 56 GHz. With the support of external high-end sources as local oscillators it combines the advantage of an easy-to-use signal source analyzer and a high-end phase noise tester. For additive and residual phase noise measurements on amplifiers Rohde & Schwarz has extended the frequency range of the internal signal source up to 54 GHz. In addition, a new and very easy method for noise figure measurements has been added.

Aug 14, 2025 | Пресс-релиз | Test & measurement

The Netherland’s charming tech hub, Utrecht, is hosting this year’s European Microwave Week (EuMW), bringing together leading experts in microwave, RF, wireless and radar technology. A key highlight of the exhibition will be the game-changing FSWX signal and spectrum analyzer from Rohde & Schwarz: Featuring a novel architecture, the FSWX enables completely new measurement scenarios in RF system testing. Visitors can see it in action in multiple applications at the company’s booth, where it will address the evolving testing needs of various industries. Additionally, Rohde & Schwarz is showcasing updates to its tried and tested R&S FSWP phase noise analyzer, alongside the latest R&S ZNB3000 vector network analyzer and other cutting-edge product innovations.

Jun 17, 2024 | Пресс-релиз | Wireless communications

Rohde & Schwarz has successfully validated mission-critical push-to-talk protocol conformance test cases for the Global Certification Forum (GCF) and achieved Test Platform Approval Criteria (TPAC) for its R&S TS-PCT protocol conformance tester. Rohde & Schwarz is the first and only test and measurement company to activate the initial mission-critical push to talk work item. With this achievement, the company is paving the way for a smooth transition from narrowband TETRA to broadband 3GPP Mission Critical Services for device manufacturers and service providers.

May 15, 2024 | Пресс-релиз | Test & measurement

Rohde & Schwarz extends its portfolio with a 2U high oscilloscope/digitizer tailored for rack mount and other applications where a low-profile form factor is critical. The new MXO 5C series is the company’s first oscilloscope without an integrated display. It delivers the same performance as the previously introduced MXO 5 series, but with a fourth of the vertical height.

Nov 10, 2025 | Пресс-релиз | SATCOM

Rohde & Schwarz will present its latest test and measurement solutions for the satellite industry at Space Tech Expo 2025. The company provides expertise and tailored tools to help satellite manufacturers and operators ensure optimal system performance and compliance with evolving industry standards. At the expo, Rohde & Schwarz will showcase solutions designed to streamline satellite testing and ensure performance by identifying potential issues before launch.