Automotive ethernet

Trigger & decode oscilloscope software package

Automotive ethernet
Открытый Lightbox
Automotive ethernet
Открытый Lightbox
Automotive ethernet, Software Automotive ethernet, Screenshot

Ключевые факты

  • Trigger and decode of 100BASE-T1/BroadR-Reach® and 1000BASE-T1 automotive Ethernet buses
  • Colour coded bus display with details down to ternary symbols
  • Full decode table with all details
  • Powerful trigger and search capability
  • Fast eye-diagram mask testing with up to 600.000 waveforms/secs

Automotive Ethernet Trigger & Decode

The R&S®RTP and R&S®RTO oscilloscope supports serial triggering and decoding of 100BASE-T1 or BroadR-Reach and 1000BASE-T1 Automotive Ethernet standards. Efficiently trigger on frame start, Idle frames, MAC frames including destination & source address, frame types and on various error conditions.

Особенности и преимущества

Fast bus setup

Bus setup in seconds with the Apps button

Starting from the Apps button or menu, it only takes a few steps to configure the automotive ethernet decoder. Once the appropriate channels are selected and the correct levels are set, decoding begins immediately. 

App cockpit with selection for Protocol decoding
Открытый Lightbox

App cockpit with selection for Protocol decoding

Simultaneous decoding of bi-directional Ethernet streams

Easy access via R&S®RT-ZF5 test fixture

The R&S®RT-ZF5 test fixture allows users to decode both the forward and reverse data streams of either 100BASE-T1 or 1000BASE-T1 networks at the same time. Users can compensate the directivity of the fixture to obtain accurate decoding results.

Automotive Ethernet setup dialog
Открытый Lightbox

Automotive Ethernet setup dialog

Decode all important layers

Display of ternary symbols, scrambled, descrambled or reversed bits

The decoded Ethernet data can be analysed via various decode layers. For example, setting the oscilloscope to display ternary symbols to directly correlate the decoding to the captured analog waveform. Further analysis such as scrambled or descrambled bits are also possible.

1000BASE-T1 decoding along with ternary symbols all time correlated
Открытый Lightbox

1000BASE-T1 decoding along with ternary symbols all time correlated

Colour-coded display

Distinguish every Ethernet frame via simple colour coding

Colour-coding of the decoded Ethernet frames makes analysis of the captured data quick and easy. On top of that, all decoded data are perfectly overlaid in time with the captured analog waveform. Address and data content can be displayed in hex, bin or ASCII formats. The protocol details can additionally be displayed in a concise table. With the R&S®SmartGrid’s flexible screen setup, the best overview of the decoded data can be achieved in seconds.

All decoded frames are colour-coded
Открытый Lightbox

All decoded frames are colour-coded

Strong trigger capability

Trigger on frame start, idle frame, MAC frame or address and various error conditions

The protocol-aware trigger lets you reliably isolate specific protocol-based events and errors. Thanks to the high acquisition rates of R&S oscilloscopes, it makes them ideal for finding errors quickly and triggering on specific protocol fields such as idle frames, MAC address or data and various errors.

100BASE-T1 trigger setup dialog
Открытый Lightbox

100BASE-T1 trigger setup dialog

Search and navigate

Powerful search and navigation capabilities on recorded acquisitions

Comprehensive search functions simplify the analysis of long signal sequences. Users can search the decoded data based on different criteria, such as a specific MAC address or a certain error condition. All detected events are shown in a table with timestamps. Applying a zoom function over the decode data to move through this table makes navigating through the events extremely easy.

Powerful search capability, even in long captures
Открытый Lightbox

Powerful search capability, even in long captures

Доступные модели

Доступные модели
Модели
Serial standard
Search

R&S®RTO6-K560

Номер заказа 1801.7060.02

Serial standard
100Base-T1, 1000Base-T1
Search

R&S®RTP-K560

Номер заказа 1803.6684.02

Serial standard
100Base-T1, 1000Base-T1
Search

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Ваш запрос отправлен. Мы свяжемся с вами в ближайшее время.
An error is occurred, please try it again later.
Общая и юридическая информация

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Условия и положения участия в розыгрыше призов «Осциллографы Rohde & Schwarz — 10 лет на рынке»

1. Розыгрыш призов «Осциллографы Rohde & Schwarz — 10 лет на рынке» (далее «Розыгрыш») проводится компанией Rohde & Schwarz GmbH & Co. KG, адрес: Mühldorfstraße 15, 81671, г. Мюнхен, Германия, тел. +49 89 41 29 0 (далее «R&S»).

2. Желающие принять участие в розыгрыше могут зарегистрироваться в период с 1 января 2020 г. по 31 декабря 2020 г. с указанием ФИО, названия компании и адреса корпоративной электронной почты.

3. Участие является бесплатным и не зависит от покупки товаров или услуг.

4. Участие в розыгрыше и получение призов возможно только для юридических лиц. Физические лицо не может участвовать от собственного имени, но допускается участие в качестве представителя юридического лица при условии заполнения заявки на участие от имени и по поручению юридического лица.

5. Призом в розыгрыше является один из 10 осциллографов R&S®RTB2000 в период с 1 января 2020 г. по 31 декабря 2020 г.:

Приз: 1x цифровой осциллограф R&S®RTB2000

6. Розыгрыш проводится в штаб-квартире Rohde & Schwarz по адресу Mühldorstrasse 15, 81671, г. Мюнхен. Победитель будет оповещен по электронной почте в течение 5 (пяти) рабочих дней.

7. Официальный представитель юридического лица обязуется сообщить Rohde & Schwarz о том, что приз был получен. В случае отказа от получения приза или отсутствии ответа в течение 2 (двух) недель будет определен новый победитель. Если определение победителя в течение 4 (четырех) недель не будет возможным, розыгрыш прекращается и приз отзывается.

8.Сотрудники R&S и члены их семей, а также лица, знакомые с процессом проведения розыгрыша и члены их семей не допускаются к заполнению заявки на участие.

9. Выплата стоимости приза в денежном эквиваленте не допускается. Призы не могут передаваться третьим лицам. Любые налоги, сборы, пошлины, взносы и другие платежи, взимаемые в стране участника, несет участник.

10. Персональные данные обрабатываются только в целях участия в розыгрыше и будут удалены через 4 (четыре) недели по окончании розыгрыша, если не оговорено иное.

11. Любой участник, не выполняющий данные Условия и положения, будет отстранен от участия в розыгрыше компанией R&S. В этом случае призы также могут быть отозваны задним числом. В случае если приз был отозван по причине невыполнения данных Условий и положений участник обязуется вернуть его за собственный счет на адрес R&S, указанный в п. 1, и будет определен новый победитель.

12. Участники не могут претендовать на призы этого розыгрыша, и судебное разбирательство в этом отношении не допускается.

13. Проведение розыгрыша и любые возникшие из него договорные отношения между R&S и соответствующим участником регулируются и толкуются в соответствии с законодательством Германии, без применения коллизионного права. В случае возникновения любых споров, прямо или косвенно связанных с участием в настоящем Розыгрыше, исключительной юрисдикцией обладают суды г. Мюнхена (Германия).

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.