Download-Center

Englisch - 28.06.2018

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

Englisch - 24.12.2017

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.

Englisch - 26.05.2020

Englisch - 31.07.2023

The R&S®SMB100A RF and microwave signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMB100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.

Englisch - 19.03.2012

Englisch - 31.07.2018

The Rohde & Schwarz Bluetooth RF test solution with the R&S®CMW and R&S®CMWrun is closely aligned to the Bluetooth RF Test Suite. Most of the tests can be performed with the equipment under test connected to a single CMW which is remotely controlled via R&S®CMWrun running on an external computer. Some of the tests require an additional signal generator. This document describes common setups for these tests and the required configurations.

Englisch - 04.05.2015

This application note describes methods using an R&S®ZVA network analyzer, one or two R&S®SMB100A signal generators and an R&S®FSW signal analyzer to accurately measure all the key parameters of frequency converters with embedded local oscillator. A commercial satellite up-converter is used as a device under test example.

Englisch - 30.04.2015

Deutsch - 31.07.2018

Rohde & Schwarz recognizes the potential risk of computer virus infection when connecting test instrumentation to Windows®-based computers via local area networks (LANs), or using removable storage devices.This white paper introduces measures to minimize malware threats and discusses ways to reduce risks while ensuring that instrument performance is not compromised. The paper also discusses the use of anti-virus software in combination with Embedded Linux based instruments.

Englisch - 23.11.2016

This Application Note describes a software program that provides easy creation and transfer of Pulse Trains between a PC and the R&S SMB100A, R&S SMA100A and R&S SMF100A analog signal generators with the Pulse Train option; or between a PC and the ARB of R&S SMBV100A, R&S SMJ100A or R&S SMU200A vector signal generators.

Englisch - 10.05.2011

The R&S®SMB100A analog signal generator is the ideal calibration source for weather radar receivers due to its highly accurate output level.

Englisch - 25.01.2011

Provides the information required to prepare the instrument for use and start working.

Englisch - 01.06.2022

Describes all instrument functions and remote control commands, including measurement and programming examples, Includes the contents of the Quick Start Guide manual.

Englisch - 01.06.2022

Signal generators play a vital role in electrical test and measurement. They generate the test signals that are applied to components such as filters and amplifier, or even to entire modules, in order to ascertain and test their behavior and characteristics. The first part of this educational note presents the applications for and the most important types of signal generators. This is followed by a description of the construction and functioning of analog and vector signal generators. To permit a better understanding of the specifications found on data sheets, a closer look at the most important parameters for a signal generator is provided.Beyond the output of spectrally pure signals, a key function of RF signal generators is the generation of analog- and digitally modulated signals. The second part of this note therefore presents the fundamentals for the most significant analog and digital modulation methods.The third part of this educational note contains exercises on the topics of analog and digital modulation. All described measurements were performed using the R&S®SMBV100A vector signal generator and the R&S®FSV spectrum analyzer.

Englisch - 03.05.2016

This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.

Englisch - 12.11.2014

Welcome to our short video tutorials on how to test radars using Rohde & Schwarz test equipment. Access to most information about radar is pretty restricted, as many radar applications are military or secretive industrial research. To show you some basic Radar tests we have created RADAR demo tools, which functions at a frequency of 2.45 GHz, which is in the unlicensed 2.4 GHz Industrial, Scientific and Medical band. So we can even perform our tests in unshielded rooms. The frequencies are also used by radar operating in the ITU "S"-band from 2.3 to 2.5 GHz for air traffic control, weather and marine radar. The videos are suitable for 'from-the-scratch' introduction of R&S RADAR test equipment. They can also be used for plain introduction to the RADAR principle.

Englisch - 03.02.2014

Signal generators are often used in automated test environment applications. The replacement of those instruments, e.g., due to malfunction or standard replacement procedures requires special care to be taken in consideration. Replacement of those instruments requires compabitiblity between the replacement and the replaced device in at least the electrical and remote-control features. This application note describes in detail how to use the emulation modes of the R&S® series SMA100A, SMB100A, SMF100A signal generators.

Englisch - 24.06.2008

Deutsch - 31.07.2023

More and more everyday items such as household appliances, vehicles, lights, etc. are now connected to the Internet, forming what is known as the "Internet of Things". Even clothing with sewn-in sensors to measure vital functions can now connect to the Internet and transmit data to cloud services. These different things use a variety of wireless technology standards to establish a connection. Due to its popularity, one of the most important standards is Bluetooth (or Bluetooth Low Energy). Before a new product with Bluetooth functionality can be launched, the qualification process defined by the Bluetooth SIG must be successfully completed. To save time and money, performance tests need to be performed in the development stage. This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5. As an alternative solution, we also cover how to perform almost all of the measurements with a spectrum analyzer and signal generator.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rohde & Schwarz is under license.

Englisch - 19.06.2017

Provides information on security issues when working with R&S®SMB100A in secure areas.

Englisch - 13.03.2017

Analog-to-digital converters (ADCs) have taken giant steps in speed and accuracy over the past years: Such devices allow high-speed video processing and even software defined radio (SDR) applications, where digitization is being performed at ever-higher intermediate frequencies (IF). This has clearly raised the bar for ADC test equipment, especially regarding the noise performance of the analog input signal and sample clock sources used in the test setup. The R&S®SMA100B offers outputs for the analog input signal of the ADC as well as the clock input signal in one single instrument - both with outstanding signal purity.

Englisch - 11.01.2021

This application note outlines two different approaches for remote-controlling Rohde & Schwarz instruments out of MathWorks MATLAB:The first one uses VISA connection and direct SCPI commands.The second approach takes advantage of Rohde & Schwarz VXI plug&play instrument drivers and MATLAB Instrument Control Toolbox.

Englisch - 12.06.2017

The aim of this application note is to provide information regarding Rohde & Schwarz instrument drivers. This paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (T&M) applications by utilizing Rohde & Schwarz instrument drivers. Furthermore the nomenclature used for Rohde & Schwarz instrument drivers will be explained.

Englisch - 01.01.2013

Combining the R&S®UPP audio analyzers with the R&S®SMB100A signal generators provides the most compact and fastest test solution for modern FM car radios

Englisch - 19.02.2015