Download-Center

All channels of DC power supplies R&S®NGL200 and R&S®NGM200 are isolated against the grounding equipment conductor and against the digital ground of the instrument. Therefore, channels can be connected in parallel for increasing the current capability, or in series for achieving higher voltages or dual-voltage supplies. In the case of parallel and serial connections it is usually desired to switch all channels simultaneously on and off for protecting the supplied circuitry and for avoiding overcurrent on other power supply channels.This application note describes how to connect and configure DC power supplies R&S®NGL200 and R&S®NGM200 for synchronized on and off switching of all channels across multiple power supplies.

Englisch - 15.06.2020

This application program supports the logging and fast logging functionality of the power supplies R&S® NGM200, NGU201 and NGU401. Standard logging is also supported with power supply R&S® NGL200 and NGP800. Power supplies R&S® NGA100 and NGE100 are supported in the data collection mode. Charting functionality is available for logged voltage, current and power values.

Englisch - 14.11.2019

This application note applies to DC power supplies R&S®NGL200, R&S®NGM200, R&S®NGP800, R&S®NGU201 and R&S®NGU401, as well as LCR meters R&S®LCX100 and R&S®LCX200. It provides an overview over ethernet-based remote services provided by the referenced R&S® instruments. These services comprise an instrument web page, VNC remote control and FTP file transfer between the instrument and a remote computer. The application note gives instructions on how to set up the instrument and the remote computer in order to be able to utilize these services.

Englisch - 19.05.2022

Applications requiring higher voltages or currents, or a stack of voltage sources with taps in-between, demand the combination of several DC power supply channels in series or in parallel.All channels of DC power supplies R&S®NGL200 and R&S®NGM200 are isolated against the grounding equipment conductor and against the digital ground of the instrument. Therefore, channels can be connected in parallel for increasing the current capability, or in series for achieving higher voltages or dual-voltage supplies.When a large number of power supply channels is used, it is desirable to have a tool for configuring all instruments and channels from one user interface, and for keeping an overview over the states and measurement values from all channels.The application program of this application note provides such a tool. The document contains background information and user manual for the software.

Englisch - 27.08.2020

The application program of this application note provides a tool for cycling battery samples, using two-quadrant DC power supplies from Rohde & Schwarz. The batteries can be repeatedly charged and discharged while collecting information about open-circuit voltage, loaded voltage and internal resistance, depending on the charged and discharged capacity. The tool provides a variety of charts for displaying the collected data. It can be used for characterizing battery samples, as well as for creating battery models which can be used in the battery simulations of R&S®NGU201 and R&S®NGM200.This tool is meant for the use by knowledgeable experts. The application note does not provide instructions on how to properly charge and discharge batteries.

Englisch - 17.12.2021

Provides information on security issues when working with R&S®NGL200 in secure areas.

Englisch - 19.02.2024

Deutsch - 18.04.2021

Deutsch - 02.02.2026

Englisch - 02.02.2026

Describes all instrument functions for the base unit and optional firmware applications.

Englisch - 23.02.2022

Deutsch - 14.10.2024

Provides the information required to prepare the instrument for use and start working.

Englisch - 23.02.2022

Englisch - 18.04.2021

Englisch - 14.10.2024

High-precision two-quadrant power supplies generate current profiles and simulate batteries

Englisch - 10.12.2020

The battery cycle tool has several charts that display collected data and can be used to characterize battery samples and create battery models.

Englisch - 02.05.2023

Provides the information required to prepare the instrument for use and start working.

Englisch - 15.04.2026

Provides information on security issues when working with R&S®NGP800 in secure areas.

Englisch - 11.12.2025

Describes all instrument functions for the base unit and optional firmware applications.

Englisch - 15.04.2026

Describes all instrument functions for the base unit and optional firmware applications.

Englisch - 23.02.2022

DC power supplies from Rohde & Schwarz can be connected and configured for synchronized on/off switching of all channels across multiple power supplies in intricate and complex systems.

Englisch - 28.04.2023

Englisch - 04.11.2019

Englisch - 08.06.2020

Provides the information required to prepare the instrument for use and start working.

Englisch - 23.02.2022