Download-Center

The measurement of error vector magnitude (EVM) is relative – but what is the reference?

Englisch - 02.03.2020

Perform DPD on a vector signal generator for improved EVM performance

Englisch - 28.08.2023

Optimize your signal and spectrum analyzer to address the most stringent EVM requirements

Englisch - 16.11.2023

This application note provides some technical background on how to optimize the measurement of one of the key performance parametersof 802.11be WLAN transmitters.

Englisch - 06.09.2022

EVM Measurements for ZigBee signals in the 2.4 GHz band

Englisch - 12.12.2014

Describes the significance of the Bit Error Rate (BER) parameter for signal analysis; How the FSW VSA application calculates the BER and determines bit errors; How this knowledge can be used to obtain correct modulation accuracy results

Englisch - 24.03.2016

This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.

Englisch - 26.04.2013

R&S®Server-Based Testing helps reduce test times for 5G New Radio multicarrier signals - each component carrier can be analyzed independently and in parallel.

Englisch - 13.09.2021

Englisch - 24.01.2022

Rohde & Schwarz offers a powerful, wideband test solution covering millimeterwave bands (including the 5G bands) to characterize the integrated amplifiers.

Englisch - 08.01.2019

High throughput is the key production metric for efficient operation. Improving test speed helps reduce the cost per device. The R&S®PVT360A performance vector tester is optimized for high speed production tests.

Englisch - 12.04.2023

EDGE Timeslot Errors Measurements with FSIQ

Englisch - 22.01.2011

Generation and Analysis of ZigBee™ IEEE802.15.4 signals in the 2.4 GHz band

Englisch - 21.06.2007

1EF105, K18D MATLAB Modeling Toolkit

Englisch - 25.03.2019

This Application Note gives a short overview how signals with two different modulation schemes can be analyzed using the R&S®FSW.

Englisch - 18.04.2016

This application note describes how to generate and analyze wideband digitally modulated signals in the mm-wave range. Rohde & Schwarz measuring equipment and some 3rd party off-the-shelf accessories are used for both signal generation and analysis.

Englisch - 02.09.2014

This application note presents generator test solutions for WLAN IEEE 802.11ax high efficiency (HE) receiver testing. This document shows how to test 802.11ax receiver specifications and the HE trigger-based PPDU specifications according to the IEEE P802.11ax/D1.3 specification draft.

Englisch - 16.08.2017

The topic of this application note is mobile phone measurements – in theory and in practice. It discusses measurements according to the most common standard in use today, GSM.

Englisch - 22.08.2014