Analyse von Automotive-Radarsignalen mit dem Oszilloskop - eGuide - Miscellaneous

Instrument Health Guide For benchtop oscilloscopes - Brochure Broschüren und Datenblätter Brochure

Fast Delivery Promotion - Flyer Broschüren und Datenblätter Flyer

Rohde & Schwarz bietet Testlösungen für Domänen- und Hochleistungs-Steuergeräte, die eine störungsfreie Kommunikation im Fahrzeug sicherstellen.

Für die frühzeitige Optimierung im F&E-Labor bietet Rohde & Schwarz ein kostenloses Tool, um die Fehlersuche bei leitungsgebundenen Störaussendungen mithilfe von Oszilloskopen zu erleichtern.

27.09.2021 | AN-Nr. 1SL372

Oszilloskop, RTP High-Performance-Oszilloskop, Automotive-Radar, Pulsanalyse, Demodulation, Mischer, Abwärtsmischung Demodulieren von Radarpulsen mit integrierten Oszilloskopfunktionen.

The Rohde & Schwarz DisplayPort 2.1 (HBRx) transmitter (TX) test solution is VESA approved and reliably tests devices for compliance.

Oszilloskop, RTP High-Performance-Oszilloskop, Automotive-Radar, Pulsanalyse, Deembedding, Mischer, Abwärtsmischung Deembedding von Mischern und anderen Messaufbaukomponenten in Echtzeit.

Oszilloskop, RTP High-Performance-Oszilloskop, Automotive-Radar, Pulsanalyse, MIMO, phasenkohärent, Mischer, Abwärtsmischung Durchführen von phasenkohärenten Messungen an mehreren Antennensignalen.

Duration: 1 hour Language: EN

Stellen Sie mit unseren Lösungen für die Automotive-Radar-Konformitätsprüfung den korrekten Betrieb von Automotive-Radarsensoren in sicherheitskritischen Anwendungen sicher.

Learn about DisplayPort transmitter testing with Rohde & Schwarz.

By using the R&S®RTP oscilloscope instead of a traditional vector network analyzer (VNA), this solution enables wideband modulation characterization of RF frontends across varying impedances. This new test setup is ideal for verifying power amplifier performance when connected to an antenna, which typically shows a dispersive impedance.

EMV-Fehleranalyse mit den Oszilloskopen R&S®RTO und R&S®RTE

25.06.2014 | AN-Nr. 1TD05

RF signal analysis with Rohde & Schwarz spectrum analyzers and oscilloscopes - Application Brochure

Buy more - Save more | Customize your oscilloscope configuration and save big - Flyer Broschüren und Datenblätter Flyer

A wide range of Signal Integrity solutions from Rohde & Schwarz ► Get more information!

Verwendung des R&S®Forum Anwenderprogramms zur Fernsteuerung von Messgeräten

28.06.2018 | AN-Nr. 1MA196

The new R&S FE110ST/SR TX/RX frontends extend the frequency range of Rohde & Schwarz signal sources such as the R&S SMW200A vector signal generator and signal analysis instruments such as the R&S RTP oscilloscope to cover the W band from 70 GHz to 110 GHz. They complement the company’s portfolio of easy-to-mount frontends.

Entdecken Sie die Lösungen von Rohde & Schwarz für Automotive-Ethernet-Tests: die weltweit erste Konformitätstestlösung für 1000BASE-T1.

This webinar is intended for engineers working on high-speed digital interface designs and testing.

Generating models with a VNA and using these on an oscilloscope via the deembedding

23.05.2023 | AN-Nr. 1SL393

As DisplayPort evolves to support ultra-high resolutions and increased data rates, robust compliance testing is essential to ensure interoperability across devices and interconnects. This application note provides a structured overview of physical-layer testing for DisplayPort source transmitters and passive cables, aligned with VESA CTS v2.1. The note covers key test procedures using Rohde & Schwarz solutions, including oscilloscope-based measurement at standardized test points, automated test execution with ScopeSuite, and signal integrity debug via equalization and jitter decomposition. It further details cable characterization using mixed-mode S-parameter analysis on a Vector Network Analyzer (VNA), with support for simulated eye diagrams and TDR-based impedance diagnostics. Practical setup examples and product references are provided to help engineers perform repeatable, standards-compliant DisplayPort PHY validation.

16.07.2025 | AN-Nr. 1SL418

MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.

31.01.2024 | AN-Nr. 1SL410

Diese Application Note bietet eine Einführung in die verschiedenen Jitter-Komponenten und beleuchtet die gängigen Ansätze zur Jitter-Zerlegung.

08.12.2021 | AN-Nr. 1SL375

Testing the world’s first quantum error correction stack

Signal integrity verification and compliance test - Application Brochure

This document provides the technical specifications of the R&S®RT-ZFxx oscilloscope test fixtures.

Sorgen Sie für ein perfektes Infotainment-Benutzererlebnis. Die Autoradio-Testlösungen von Rohde & Schwarz bieten eine Multi-Standard-Plattform für Entwicklung und Produktion.

This webinar is intended for engineers who work on high-speed digital design and test