R&S®FSW signal and spectrum analyzer

Setting standards in innovation and usability

R&S®FSW-Signal and spectrum analyzer
Abrir Lightbox
R&S®FSW-Signal and spectrum analyzer, front view
Abrir Lightbox
R&S®FSW-Signal and spectrum analyzer, side view
Abrir Lightbox
R&S®FSW-Signal and spectrum analyzer, rear view
Abrir Lightbox
R&S®FSW-Signal and spectrum analyzer
Abrir Lightbox
R&S®FSW85 - Signal and spectrum analyzer 2 Hz to 85 GHz
Abrir Lightbox
R&S®FSW-Signal and spectrum analyzer R&S®FSW-Signal and spectrum analyzer, front view R&S®FSW-Signal and spectrum analyzer, side view R&S®FSW-Signal and spectrum analyzer, rear view R&S®FSW-Signal and spectrum analyzer R&S®FSW85 - Signal and spectrum analyzer 2 Hz to 85 GHz

Key facts

  • Unparalleled low phase noise and best sensitivity on the market
  • 8.3 GHz internal analysis bandwidth
  • 800 MHz real-time analysis bandwidth
  • SCPI recorder simplifies code generation
  • New flat Windows 10 design and multitouch gesture support
  • R&S signal & spectrum analyzer | 3 years warranty extension
  • Design & Elektronik Award Innovator des Jahres

R&S®FSW signal and spectrum analyzer

The high-performance R&S®FSW signal and spectrum analyzer helps engineers accomplish the most demanding tasks. Its wide internal analysis bandwidth allows the characterization of wideband components and communications systems. The instrument's unparalleled phase noise facilitates the development of high-performance oscillators such as those used in radars.

Features & benefits

Superior RF performance

RF performance that meets exacting demands

The R&S®FSW redefines the top of the line for signal and spectrum analyzers, offering superior RF performance in terms of phase noise, displayed average noise level, intermodulation suppression and dynamic range for ACLR and harmonic measurements.

FSW - Signal and spectrum analyzer
Open Lightbox

Phase noise

Phase noise at 10 GHz carrier frequency at 10 kHz offset from the carrier: typ. –133 dBc (1 Hz).

Advanced user interface

Designed for convenience

  • 12.1’’ high resolution, multitouch display with gesture support - flat design with Windows 10 look and feel
  • Various measurements can be displayed simultaneously in separate windows, which makes result interpretation easier
  • Embedded SCPI recorder simplifies code generation for automatic, remote controlled measurements
FSW-Signal and spectrum analyzer
Open Lightbox

Convenient user interface.

Advanced R&S®FSW with 12.1" high resolution, multitouch display and much more.

Be ahead in 5G development

In-depth 5G physical layer signal analysis

  • The R&S®FSW scalable, wide internal analysis bandwidth of up to 8.3 GHz allows you to capture the entire bandwidth of the downlink signal and evaluate the complete system.
  • The R&S®FSW-K144 and R&S®FSW-K145 options cover in-band measurements of 3GPP 5G NR in the downlink and uplink. Each signal subframe is analyzed and a wide range of measurement results are provided, including the EVM, frequency and power of different channels and signals.
FSW-Signal and spectrum analyzer
Open Lightbox

R&S®FSW-K144 5G New Radio downlink application

R&S®FSW-K144 detects and sets many parameters automatically, giving you more time to concentrate on the insights gained from the detailed analysis.

Extensive radar analysis functions

Fast and comprehensive radar signal analysis

In addition to its wide analysis bandwidth (up to 8.3 GHz), the analysis functions offered by the R&S®FSW are essential for radar testing.

  • The R&S®FSW-K6 pulse measurement application measures all relevant pulse parameters at the touch of a key
  • The R&S®FSW-K6S time sidelobe measurement option measures the pulse compression parameters
  • The R&S®FSW-K60/K60H option analyzes frequency hopping signals
FSW-Signal and spectrum analyzer
Open Lightbox

R&S®FSW-K6 pulse measurement option.

The R&S®FSW-K6 pulse measurement application measures all relevant pulse parameters at the touch of a button.

Automotive radar signal analysis

Image-free wideband signal analysis in the E band

The R&S®FSW85 signal and spectrum analyzer features a YIG preselector for frequencies between 8 GHz and 85 GHz, providing image-free spectrum analysis. Its wide analysis bandwidth (up to 8.3 GHz) combined with the R&S®FSW-K60/-K60C transient analysis/chirp measurement option allows you to characterize up to 5 GHz wide FMCW signals like those used in automotive radars.

FSW signal and spectrum analyzer
Open Lightbox

Automotive radar measurements

FMCW signal with 2 GHz bandwidth at 77 GHz measured with the R&S®FSW-K60C option and the R&S®FSW-B2001 2 GHz internal bandwidth extension

Ideal for satellite RF testing

High-performance measurement solutions for designing, developing and testing satellite payloads, payload subsystems and components

The R&S®FSW offers dedicated measurement applications for the most critical measurements such as group delay, linearity, gain transfer, noise power ratio (NPR), etc. It also demodulates satellite RF signals of several standards such as DVB-S2X and OneWeb. The R&S®FSW scalable, wide analysis bandwidth (up to 8.3 GHz) meets the increasing demand for wide signal bandwidths.

FSW-Signal and spectrum analyzer
Open Lightbox

R&S®FSW-K17 multicarrier group delay measurements.

Measures absolute and relative group delay with high accuracy within milliseconds.

Real-time spectrum analysis

Don’t miss a thing with the real-time spectrum analysis option

The R&S®FSW real-time options allow users to reliably detect extremely short sporadic interference in the nanosecond range even in close proximity to powerful carriers – in a bandwidth of up to 800 MHz. Real-time spectrum analysis enables users to analyze existing frequency hopping algorithms and create alternative ones to prevent collisions between signals of different standards operating in the same frequency band.

FSW-Signal and spectrum analyzer
Open Lightbox

Real-time spectrum of the ISM band at 2.4 GHz.

Analyzes and prevents collisions between signals of different standards operating in the same frequency band (e.g. WLAN and Bluetooth®).

Powerful vector signal analysis application

Digital signal analysis

The R&S®FSW-K70 vector signal analysis option enables users to flexibly analyze digitally modulated single carriers down to the bit level. The clearly structured operating concept simplifies measurements despite a wide range of analysis tools.The R&S®FSW-K70M allows analysis of signals with two different modulation schemes, such as DVB-S2X signals.The R&S®FSW-K70P extension measures the raw bit error rate (BER) on PRBS data up to PRBS23.

FSW-Signal and spectrum analyzer
Open Lightbox

Analysis of a 1024QAM modulated signal.

Constellation diagram, result table, symbol table and EVM distribution.

Model name
Frequency range
Maximum frequency with external harmonic mixers
Maximum analysis bandwidth
Maximum Real-time bandwidth
Starting at
R&S®FSW8

Order number 1331.5003.08

Frequency range
2 Hz to 8 GHz
Maximum frequency with external harmonic mixers
not supported
Maximum analysis bandwidth
512 MHz
Maximum Real-time bandwidth
512 MHz
R&S®FSW13

Order number 1331.5003.13

Frequency range
2 Hz to 13.6 GHz
Maximum frequency with external harmonic mixers
not supported
Maximum analysis bandwidth
512 MHz
Maximum Real-time bandwidth
512 MHz
R&S®FSW26

Order number 1331.5003.26

Frequency range
2 Hz to 26.5 GHz
Maximum frequency with external harmonic mixers
500 GHz
Maximum analysis bandwidth
2 GHz
Maximum Real-time bandwidth
800 MHz
R&S®FSW43

Order number 1331.5003.43

Frequency range
2 Hz to 43.5 GHz
Maximum frequency with external harmonic mixers
500 GHz
Maximum analysis bandwidth
8.3 GHz
Maximum Real-time bandwidth
800 MHz
R&S®FSW50

Order number 1331.5003.50

Frequency range
2 Hz to 50 GHz
Maximum frequency with external harmonic mixers
500 GHz
Maximum analysis bandwidth
8.3 GHz
Maximum Real-time bandwidth
800 MHz
R&S®FSW67

Order number 1331.5003.67

Frequency range
2 Hz to 67 GHz
Maximum frequency with external harmonic mixers
500 GHz
Maximum analysis bandwidth
8.3 GHz
Maximum Real-time bandwidth
800 MHz
R&S®FSW85

Order number 1331.5003.85

Frequency range
2 Hz to 85 GHz (with R&S®FSW-B90G option: 2 Hz to 90 GHz)
Maximum frequency with external harmonic mixers
500 GHz
Maximum analysis bandwidth
8.3 GHz
Maximum Real-time bandwidth
800 MHz
Specifications
Frequency
Frequency rangeR&S®FSW82 Hz to 8 GHz
 R&S®FSW132 Hz to 13.6 GHz
 R&S®FSW262 Hz to 26.5 GHz
 R&S®FSW432 Hz to 43.5 GHz
 R&S®FSW502 Hz to 50 GHz
 R&S®FSW672 Hz to 67 GHz
 R&S®FSW852 Hz to 85 GHz up to 90 GHz with R&S®FSW-B90G option, YIG preselector = off
Aging of frequency reference 1 × 10–7/year
 with R&S®FSW-B4 option3 × 10–8/year
Bandwidths
Resolution bandwidthsstandard filter1 Hz to 10 MHz, 80 MHz (with R&S®FSW-B8 option)
 RRC filter18 kHz (NADC),
24.3 kHz (TETRA),
3.84 MHz (3GPP)
 channel filter100 Hz to 5 MHz
 video filter1 Hz to 10 MHz
I/Q demodulation bandwidth 10 MHz
 with R&S®FSW-B28 option28 MHz
 with R&S®FSW-B40 option40 MHz
 with R&S®FSW-B80 option80 MHz
 with R&S®FSW-B160 option160 MHz
 with R&S®FSW-B320 option320 MHz
 with R&S®FSW-B512 option512 MHz
 with R&S®FSW-B1200 option1.2 GHz1)
 with R&S®FSW-B2001 option2 GHz1)
 with R&S®FSW-B4001 option4.4 GHz2)
 with R&S®FSW-B6001 option6.4 GHz3)
 with R&S®FSW-B8001 option8.3 GHz3)
 with R&S®FSW-B2000 option2 GHz4)
 with R&S®FSW-B5000 option5 GHz5)
Phase noise
10 kHz offset from carrier500 MHz carrier–141 dBc (1 Hz) (typ.)
 1 GHz carrier–140 dBc (1 Hz) (typ.)
 10 GHz carrier–133 dBc (1 Hz) (typ.)
Displayed average noise level (DANL)
 2 GHz–156 dBm (1 Hz) (typ.)
 with R&S®FSW-B13 option–159 dBm (1 Hz) (typ.)
DANL with preamplifier
(R&S®FSW-B24 option)
2 GHz–169 dBm (1 Hz) (typ.)
Intermodulation
Third-order intercept (TOI)f < 1 GHz+30 dBm (typ.)
 f < 3 GHz+25 dBm (typ.)
 19 GHz to 26.5 GHz+23 dBm (typ.)
Total measurement uncertainty8 GHz< 0.37 dB
1) Not available for the R&S®FSW8 and R&S®FSW13.
2)Available for the R&S®FSW43, R&S®FSW50, R&S®FSW67, R&S®FSW85.
3)Available for the R&S®FSW43, R&S®FSW50, R&S®FSW67, R&S®FSW85 for f ≥ 18 GHz.
4) 2 GHz demodulation bandwidth for frequencies > 5.5 GHz. R&S®RTO2044 digital oscilloscope required. Not available for the R&S®FSW8 and R&S®FSW13.
5) Available for the R&S®FSW85 and R&S®FSW43 (R&S®RTO2064 oscilloscope required).

Available options

Hardware options
Product
Description
R&S®FSW-B4

Order number 1313.0703.02

Description
OCXO precision frequency reference
R&S®FSW-B8

Order number 1313.2464.26

Description
Resolution bandwidth > 10 MHz
for R&S®FSW8 / R&S®FSW13 / R&S®FSW26
R&S®FSW-B8

Order number 1313.2464.02

Description
Resolution bandwidth > 10 MHz
for R&S®FSW43 / R&S®FSW50 / R&S®FSW67 / R&S®FSW85
Export license required.
R&S®FSW-B8E

Order number 1338.6911.02

Description
Resolution bandwidth 40 MHz
R&S®FSW-B10

Order number 1313.1622.02

Description
External generator control
R&S®FSW-B13

Order number 1313.0761.02

Description
Highpass filter for harmonic measurements
R&S®FSW-B17

Order number 1313.0784.02

Description
Digital baseband interface
R&S®FSW-B18

Order number 1313.0790.10

Description
Spare solid state drive (removable hard drive)
R&S®FSW-B21

Order number 1313.1100.28

Description
LO/IF connections for external mixers
for R&S®FSW26 / R&S®FSW43 / R&S®FSW50 / R&S®FSW67
R&S®FSW-B21

Order number 1313.1100.86

Description
LO/IF connections for external mixers
for R&S®FSW85
R&S®FSW-B24

Order number 1313.0832.13

Description
RF preamplifier, 100 kHz to 13.6 GHz
for R&S®FSW8 / R&S®FSW13
R&S®FSW-B24

Order number 1313.0832.26

Description
RF preamplifier, 100 kHz to 26.5 GHz
for R&S®FSW26
R&S®FSW-B24

Order number 1313.0832.43

Description
RF preamplifier, 100 kHz to 43.5 GHz
for R&S®FSW43
No export license required.
R&S®FSW-B24

Order number 1313.0832.49

Description
RF preamplifier, 100 kHz to 50 GHz
for R&S®FSW50
No export license required.
R&S®FSW-B24

Order number 1313.0832.51

Description
RF preamplifier, 100 kHz to 50 GHz
for R&S®FSW50
Export license required.
R&S®FSW-B24

Order number 1313.0832.66

Description
RF preamplifier, 100 kHz to 67 GHz
for R&S®FSW67
No export license required.
R&S®FSW-B24

Order number 1313.0832.67

Description
RF preamplifier, 100 kHz to 67 GHz
for R&S®FSW67
Export license required.
R&S®FSW-B25

Order number 1313.0990.02

Description
Electronic attenuator, 1 dB steps
for R&S®FSW8 / R&S®FSW13 / R&S®FSW26
R&S®FSW-B33

Order number 1313.3602.02

Description
USB mass memory write protection
R&S®FSW-B28

Order number 1313.1645.02

Description
28 MHz analysis bandwidth
R&S®FSW-B40

Order number 1313.0861.02

Description
40 MHz analysis bandwidth
R&S®FSW-B80

Order number 1313.0878.02

Description
80 MHz analysis bandwidth
R&S®FSW-B160

Order number 1325.4850.14

Description
160 MHz analysis bandwidth
R&S®FSW-B320

Order number 1325.4867.14

Description
320 MHz analysis bandwidth
R&S®FSW-B512

Order number 1331.7106.14

Description
512 MHz analysis bandwidth
R&S®FSW-B1200

Order number 1331.6400.14

Description
1200 MHz analysis bandwidth
Not available for the R&S®FSW8 and R&S®FSW13. Not in combination with R&S®FSW-B2000.
R&S®FSW-B2001

Order number 1331.6916.14

Description
2000 MHz analysis bandwidth
Not available for the R&S®FSW8 and R&S®FSW13. Not in combination with R&S®FSW-B2000.
R&S®FSW-B4001

Order number 1338.5215.14

Description
4400 MHz analysis bandwidth
Not available for R&S®FSW8, R&S®FSW13 and R&S®FSW26
R&S®FSW-B6001

Order number 1338.5221.14

Description
6400 MHz analysis bandwidth
Not available for R&S®FSW8, R&S®FSW13 and R&S®FSW26
R&S®FSW-B8001

Order number 1338.5238.14

Description
8300 MHz analysis bandwidth
Not available for R&S®FSW8, R&S®FSW13 and R&S®FSW26
R&S®FSW-B2000

Order number 1325.4750.02

Description
2 GHz analysis bandwidth
R&S®RTO2044 / R&S®RTO1044 oscilloscope required. Not available for the R&S®FSW8 and R&S®FSW13.
R&S®FSW-B5000

Order number 1331.6997.85

Description
5 GHz analysis bandwidth
Available for the R&S®FSW85. R&S®RTO2064 oscilloscope required. Not available in combination with R&S®FSW-B2000.
R&S®FSW-B5000

Order number 1331.6997.43

Description
5 GHz analysis bandwidth
Available for the R&S®FSW43. R&S®RTO2064 oscilloscope required. Not available in combination with R&S®FSW-B2000.
R&S®FSW-B71

Order number 1313.1651.13

Description
Analog baseband inputs, 40 MHz analysis bandwidth
for R&S®FSW8 / R&S®FSW13
R&S®FSW-B71

Order number 1313.1651.26

Description
Analog baseband inputs, 40 MHz analysis bandwidth
for R&S®FSW26 / R&S®FSW43 / R&S®FSW50
R&S®FSW-B71

Order number 1313.1651.67

Description
Analog baseband inputs, 40 MHz analysis bandwidth
for R&S®FSW67
R&S®FSW-B71

Order number 1313.1651.86

Description
Analog baseband inputs, 40 MHz analysis bandwidth
for R&S®FSW85
R&S®FSW-B71E

Order number 1313.6547.02

Description
80 MHz analysis bandwidth for analog baseband inputs
R&S®FSW-B71 required
R&S®FSW-B2071

Order number 1331.8302.02

Description
Oscilloscope baseband inputs
R&S®FSW-B512R

Order number 1331.7106.16

Description
Real-time spectrum analyzer, 512 MHz, POI ≤ 15 µs
Includes 512 MHz analysis bandwidth and 200 MHz IF filter. Export license required.
R&S®FSW-B517

Order number 1331.6980.02

Description
DIG IQ 40G streaming out interface
R&S®FSW-B512/-U512/-B1200/-U1200/-B2001/-U2001/-B800R required
R&S®FSW-B800R

Order number 1331.6400.16

Description
Real-time spectrum analyzer, 800 MHz, POI ≤ 15 µs
Includes 2000 MHz analysis bandwidth. Not available in combination with R&S®FSW-B2000. Export license required.
R&S®FSW-B90G

Order number 1331.7693.02

Description
Frequency extension, 90 GHz
for R&S®FSW85 only;
without preselection for f > 85 GHz
R&S®FSW-B106

Order number 1331.6451.02

Description
I/Q memory extension, 6 GB
R&S®FSW-B160/‑U160/‑B320 required
R&S®FSW-B108

Order number 1331.6751.02

Description
I/Q memory extension, 8 GB
R&S®FSW-B1200, R&S®FSW-B2001 or R&S®FSW-B800R required
R&S®FSW-B124

Order number 1338.5273.02

Description
I/Q memory extension 24 Gbyte
Requires R&S®FSW-B4001, R&S®FSW-B6001 or R&S®FSW-B8001.
Software options
Product
Description
FSWK6front.jpg

Order number 1313.1322.02

Description
Pulse measurements
FSW-K6S_Time_Side_Lobe_Measurement__Signal_and_Spectrum_Analyzer_img.jpg

Order number 1325.3783.02

Description
Time sidelobe measurement
R&S®FSW-K6 option required.
R&S®FSW-K7

Order number 1313.1339.02

Description
Analog modulation analysis for AM/FM/φM
FSWK10_screen1.jpg

Order number 1313.1368.02

Description
GSM/EDGE/EDGE evolution/VAMOS measurements
FSW-K15_ILSVOR_measurement-Signal_and_Spectrum_Analyzer_img1.jpg

Order number 1331.4388.02

Description
VOR/ILS measurements
R&S®FSW-K17

Order number 1313.4150.02

Description
Multicarrier group delay measurements
R&S®FSW-K17S

Order number 1338.5896.02

Description
Subspan measurement for group delay
Requires R&S®FSW-K17, R&S®FSW-B512, R&S®FSW-B512R, R&S®FSW-B1200, R&S®FSW-B2001, R&S®FSW-B800R, R&S®FSW-B4001, R&S®FSW-B6001 or R&S®FSW-B8001.
R&S®FSW-K18

Order number 1325.2170.02

Description
Amplifier measurements
R&S®FSW-K18D

Order number 1331.6845.02

Description
Direct DPD measurements
R&S®FSW-K18F

Order number 1338.7230.02

Description
Frequency response and group delay measurements
R&S®FSW-K19

Order number 1331.8283.02

Description
Noise power ratio measurements

Order number 1313.1380.02

Description
Noise figure measurements
R&S®FSW-K33

Order number 1322.7936.02

Description
Security write protection of solid state drive
R&S®FSW-K40

Order number 1313.1397.02

Description
Phase noise measurements
R&S®FSW-K50

Order number 1325.2893.02

Description
Spurious measurements
FSWK54_front.jpg

Order number 1313.1400.02

Description
EMI measurement
Finding, classifying and eliminating electromagnetic interference
R&S®FSW-K54CAL

Order number 1331.5932.02

Description
CISPR calibration for R&S®FSW-K54
R&S®FSW-K60

Order number 1313.7495.02

Description
Transient measurement application
R&S®FSW-K60H

Order number 1322.9916.02

Description
Transient hop measurement
R&S®FSW-K60 option required.
R&S®FSW-K60C

Order number 1322.9745.02

Description
Transient chirp measurement
R&S®FSW-K60 option required.
rohde-schwarz-fsw-k70.jpg

Order number 1313.1416.02

Description
Vector signal analysis
R&S®FSW-K70M

Order number 1338.4177.02

Description
Multimodulation analysis
R&S®FSW-K70P

Order number 1338.3893.02

Description
BER PRBS measurements
R&S®FSW-K72

Order number 1313.1422.02

Description
GPP FDD (WCDMA) BS measurements (incl. HSDPA and HSDPA+)
R&S®FSW-K73

Order number 1313.1439.02

Description
3GPP FDD (WCDMA) MS measurements (incl. HSUPA and HSUPA+)
R&S®FSW-K76

Order number 1313.1445.02

Description
TD-SCDMA BS measurements
R&S®FSW-K77

Order number 1313.1451.02

Description
TD-SCDMA UE measurements
R&S®FSW-K82

Order number 1313.1468.02

Description
CDMA2000® BS measurements
R&S®FSW-K83

Order number 1313.1474.02

Description
CDMA2000® MS measurements
R&S®FSW-K84

Order number 1313.1480.02

Description
1xEV-DO BS measurements
R&S®FSW-K85

Order number 1313.1497.02

Description
1xEV-DO MS measurements

Order number 1313.1500.02

Description
WLAN 802.11a/b/g measurements

Order number 1313.1516.02

Description
WLAN 802.11n measurements

Order number 1313.4209.02

Description
WLAN 802.11ac measurements
R&S®FSW-K91AX

Order number 1331.6345.02

Description
WLAN 802.11ax measurements
R&S®FSW-K91P

Order number 1321.5646.02

Description
WLAN 802.11p measurements
R&S®FSW-K95

Order number 1313.1639.02

Description
WLAN 802.11ad measurements
R&S®FSW-K97

Order number 1338.4902.02

Description
WLAN 802.11ay measurements
R&S®FSW-K100

Order number 1313.1545.02

Description
UTRA/LTE FDD BS measurements
R&S®FSW-K101

Order number 1313.1551.02

Description
EUTRA/LTE FDD UE measurements
R&S®FSW-K102

Order number 1313.1568.02

Description
EUTRA/LTE BS MIMO measurements
R&S®FSW-K103

Order number 1313.2487.02

Description
EUTRA/LTE UL advanced UL measurements
R&S®FSW-K104

Order number 1313.1574.02

Description
EUTRA/LTE TDD BS measurements
R&S®FSW-K105

Order number 1313.1580.02

Description
EUTRA/LTE TDD uplink measurements
R&S®FSW-K106

Order number 1331.6351.02

Description
EUTRA/LTE NB-IoT downlink measurements
R&S®FSW-K118

Order number 1331.7370.02

Description
VERIZON 5GTF downlink measurements
R&S®FSW-K119

Order number 1331.8060.02

Description
VERIZON 5GTF uplink measurements
FSW-K144-5G-new-radio-measurements-spectrum-analyzer_41.jpg

Order number 1338.3606.02

Description
5G NR Rel. 15 downlink measurements
R&S®FSW-K145

Order number 1338.3612.02

Description
5G NR Rel. 15 uplink measurements
R&S®FSW-K147

Order number 1338.6486.02

Description
5G NR combined ACLR/SEM/EVM measurements
Requires R&S®FSW-K144.
R&S®FSW-K148

Order number 1350.6624.02

Description
5G NR Rel. 16 extension for uplink/downlink measurements
Requires R&S®FSW-K144 or R&S®FSW-K145.
R&S®FSW-K192

Order number 1325.4138.02

Description
DOCSIS 3.1 OFDM downstream
R&S®FSW-K193

Order number 1325.4144.02

Description
DOCSIS 3.1 OFDMA upstream
R&S®FSW-K201

Order number 1331.7387.02

Description
OneWeb reverse link measurements
R&S®FSW-K161R

Order number 1338.2700.02

Description
160 MHz real-time measurement application, POI ≤ 15 µs
R&S®FSW-B160 or R&S®FSW-B320 required. Not available for R&S®FSW-B512/-B512R/-B1200/-B2001/-B800R. No export license required.
R&S®FSW-K512RE

Order number 1338.4731.02

Description
512 MHz real-time measurement application, POI > 15 μs
Requires R&S®FSW-B512.
R&S®FSW-K800RE

Order number 1338.7801.02

Description
800 MHz real-time measurement application, POI > 15 μs
Requires R&S®FSW-B1200 or R&S®FSW-B2001.
R&S®FSW-K544

Order number 1338.2716.02

Description
User defined frequency correction by SnP file
Corrects frequency response (amplitude and phase) of measurement setup.
Upgrades
Product
Description
Analysis bandwidth upgrade
R&S®FSW-U40

Order number 1313.5205.02

Description
Analysis bandwidth upgrade from 28 MHz to 40 MHz
Analysis bandwidth upgrade
R&S®FSW-U80

Order number 1313.5211.02

Description
Analysis bandwidth upgrade from 40 MHz to 80 MHz
Analysis bandwidth upgrade
R&S®FSW-U160

Order number 1325.5357.14

Description
Analysis bandwidth upgrade from 80 MHz to 160 MHz
Analysis bandwidth upgrade
R&S®FSW-U320

Order number 1313.7189.02

Description
Analysis bandwidth upgrade from 160 MHz to 320 MHz
Analysis bandwidth upgrade
R&S®FSW-U512

Order number 1321.6320.24

Description
Analysis bandwidth upgrade from 80 MHz to 512 MHz
Analysis bandwidth upgrade
R&S®FSW-U1200

Order number 1331.7006.14

Description
Analysis bandwidth upgrade from 80 MHz, 160 MHz, 512 MHz to 1200 MHz
for R&S®FSW26 / R&S®FSW43 / R&S®FSW50 / R&S®FSW67 / R&S®FSW85
R&S®FSW-B80 or R&S®FSW-B160/-U160 or R&S®FSW-B320/-U320 or R&S®FSW-B512/-U512 required. Not available for instruments with R&S®FSW-B512R, R&S®FSW-U512R, R&S®FSW-B2000, R&S®FSW-U2000
Analysis bandwidth upgrade
R&S®FSW-U2001

Order number 1331.7070.02

Description
Analysis bandwidth upgrade from 1200 MHz to 2000 MHz
R&S®FSW-B1200 or R&S®FSW-U1200 required.
Bandwidth
R&S®FSW-U4001

Order number 1338.5244.43

Description
Analysis Bandwidth Upgrade from 80/160/320/512 MHz to 4400 MHz
FSW-B80/160/320/512/U160/U512/…required
Bandwidth
R&S®FSW-U4002

Order number 1338.6192.43

Description
Analysis Bandwidth Upgrade from 1200/2000 MHz to 4400 MHz
FSW-B1200 or FSW-B2001 required
Bandwidth
R&S®FSW-U6001

Order number 1338.5250.02

Description
Analysis Bandwidth Upgrade from 4400 MHz to 6400 MHz
FSW-B4001 or FSW-U4001 required
Bandwidth
R&S®FSW-U8001

Order number 1338.5267.02

Description
Analysis Bandwidth Upgrade from 6400 MHz to 8312 MHz
FSW-B6001 or FSW-U6001 required
Analysis bandwidth upgrade
R&S®FSW-U512R

Order number 1321.6320.26

Description
Upgrade realtime spectrum analyzer 512 MHz, POI ≤ 15 µs
Includes 512 MHz analysis bandwidth. R&S®FSW-B80 or R&S®FSW-U80 required. Export license required.
Analysis bandwidth upgrade
R&S®FSW-U5000

Order number 1331.7629.44

Description
Upgrade to 5 GHz signal analysis bandwidth
for R&S®FSW43; uses R&S®RTO264 oscilloscope as digitizer
Analysis bandwidth upgrade
R&S®FSW-U5000

Order number 1331.7629.86

Description
Upgrade to 5 GHz signal analysis bandwidth
for R&S®FSW85; uses R&S®RTO2064 oscilloscope as digitizer
Recommended extras
Product
Description
Description
Harmonic mixers
The R&S®FS-Zxx harmonic mixers extend the frequency range of Rohde & Schwarz analyzers up to 500 GHz.
R&S®FSW-Z124

Order number 1338.4783.02

Description
DUT positioner for R&S®FSW85

Order number 1338.8008.18

Description
Smart noise source 10 MHz to 18 GHz

Order number 1338.8008.26

Description
Smart noise source 10 MHz to 26.5 GHz

Order number 1338.8008.40

Description
Smart noise source 100 MHz to 40 GHz

Order number 1338.8008.55

Description
Smart noise source 100 MHz to 55 GHz

R&S®FSW - Media center

#ThinkSix - Comunicaciones en el rango de los sub-THz: un paso hacia el 6G

Rohde & Schwarz ha llevado a cabo demostraciones en la banda de frecuencias de los subterahercios utilizando el analizador de señal y espectro de alta gama R&S FSW, que admite un ancho de banda de análisis interno sin precedentes: 8,3 GHz.

may. 20, 2020

Generación y análisis de señales 5G NR

Este vídeo muestra cómo evaluar rápidamente componentes con diferentes parámetros importantes de capa física de 5G NR usando las opciones de generación y análisis de 5G NR del generador vectorial de señales R&S SMW200A y el analizador de señal y espectro R&S FSW.

ago. 12, 2019

Medida de selectividad en banda para 5G NR

En este vídeo mostramos la capacidad de banda base múltiple del generador vectorial de señales R&S SMW200A para generar las señales deseadas e interferentes para FR2 en un solo instrumento.

ago. 12, 2019

Generación y análisis de modelos de test 5G NR

Este vídeo muestra la generación y el análisis de un modelo de test 5G NR TM3.1 utilizando el generador vectorial de señales R&S®SMW200A y el analizador de señal y espectro R&S®FSW.

ago. 12, 2019

El 5G ya está aquí: superar los retos de las pruebas de 5G NR

En el primer episodio de una nueva serie de vídeos, analizaremos dónde se encuentra 5G en la actualidad, exploraremos los retos de test y medida, y descubriremos soluciones innovadoras, como el comprobador de radiocomunicación R&S CMX500.

ago. 01, 2019

El 5G ya está aquí: cómo abordar los retos que plantean las pruebas de 5G NR en modo no independiente (NSA)

Consulte información más detallada sobre uno de los procedimientos de acceso de 5G: el modo no independiente.

ago. 01, 2019

Coexistencia de 5G y DVB-S2

Cómo realizar medidas de calificación en sistemas y componentes de satélites.

jul. 31, 2019

Medidas de relación de potencia a ruido (NPR)

La relación de potencia a ruido es una medida básica en la industria satelital usada para medir la linealidad de un componente activo o un canal o ruta de transmisión completa en un enlace de comunicaciones por satélite.

jul. 31, 2019

Application videos

Desmitificación del 5G: generación de señales 5G NR en la nueva banda de frecuencias de 47 GHz

En este vídeo descubrirá su rendimiento al medir la magnitud del vector de error (EVM) de una señal 5G NR con un ancho de 100 MHz a 47,2 GHz.

dic. 10, 2019

Esclareciendo 5G: Coexistencia de 5G NR con LTE. Test de compartición dinámica de espectro (DSS), parte 1

Este vídeo muestra la configuración de una señal LTE, incluidas las subtramas MBSFN, con ayuda del generador vectorial de señales R&S SMW200A.

nov. 25, 2019

Esclareciendo 5G: Coexistencia de 5G NR con LTE. Test de compartición dinámica de espectro (DSS), parte 2

Este vídeo muestra cómo configurar y medir la compartición dinámica de espectro (DSS) mediante componentes de señal 5G NR usando subtramas MBSFN de una señal LTE.

nov. 25, 2019

Esclareciendo 5G: Coexistencia de 5G NR con LTE mediante compartición dinámica de espectro (DSS)

Este vídeo explora los fundamentos técnicos que permiten el uso de DSS entre 5G NR y LTE.

nov. 25, 2019

Coexistencia de 5G y DVB-S2

Cómo realizar medidas de calificación en sistemas y componentes de satélites.

jul. 31, 2019

Medidas de relación de potencia a ruido (NPR)

La relación de potencia a ruido es una medida básica en la industria satelital usada para medir la linealidad de un componente activo o un canal o ruta de transmisión completa en un enlace de comunicaciones por satélite.

jul. 31, 2019

Industrialización del sector NewSpace con nuevas tecnologías

El sector del NewSpace está modificando rápidamente las pruebas requeridas en la industria satelital.

jul. 31, 2019

Components

Solutions to optimize the performance of your components and devices

More information

Wireless communications testing

Leading solutions for today and tomorrow's connected world

More information

Aerospace & defense testing

Measurement solutions for applications including Satellite, Radar/EW and Avionics

More information

Medidas de red para la industria del automóvil

Resuelva los problemas de todas las redes con protocolos de uso común en la industria del automóvil.

Más información

Solicitar información

¿Tiene preguntas o necesita información adicional? Simplemente complete este formulario y nos pondremos en contacto con usted.

Deseo recibir información de Rohde & Schwarz por

Permiso de marketing

¿Qué significa esto exactamente?

Estoy de acuerdo con que ROHDE & SCHWARZ GmbH & Co. KG y la entidad o subsidiaria ROHDE & SCHWARZ que figure en la Declaración de confidencialidad del sitio web se ponga en contacto conmigo a través del canal elegido (correo electrónico o correo postal) para fines de marketing y publicitarios (p. ej., información sobre ofertas especiales y promociones de descuentos) en relación con, pero sin limitarse a, productos y soluciones para test y medida, seguridad en las comunicaciones, monitorización y medidas de redes, broadcast y multimedia así como ciberseguridad.

Sus derechos

Esta declaración de consentimiento se puede retirar en cualquier momento enviando un correo electrónico a news@rohde-schwarz.com con el asunto «Cancelar mi suscripción». Además, en cada correo electrónico enviado se incluye un enlace para cancelar por correo electrónico la suscripción a futuros anuncios. En la Declaración de privacidad encontrará información adicional sobre el uso de los datos personales y el procedimiento de retirada.

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.