R&S®ZNA Vector Network Analyzers

R&S®ZNA vector network analyzer
Abrir Lightbox
R&S®ZNA vector network analyzer, side view
Abrir Lightbox
R&S®ZNA vector network analyzer, rear view
Abrir Lightbox
R&S®ZNA vector network analyzer R&S®ZNA vector network analyzer, side view R&S®ZNA vector network analyzer, rear view

Key facts

  • 10 MHz to 26.5/43.5 GHz (R&S®ZNA26/43)
  • Two or four port models available
  • Excellent RF-performance
  • Up to four integrated sources
  • Unique and intuitive touch-only operation
  • R&S®ZNA vector network analyzer | 3 years warranty extension

Masters the most challenging measurement tasks

The R&S®ZNA vector network analyzers are the high-end series of the R&S VNA portfolio: excellent RF-performance is combined with a wide range of software features and a unique hardware concept. The touch-only operation together with the DUT-centric approach makes the R&S®ZNA to a powerful, universal and compact measurement system for characterizing both, passive and active devices.

Features & benefits

Excellent RF-performance

High performance and fast speed for advanced measurement tasks

  • Precise measurements on active and passive components
  • Wide dynamic range to characterize even high-blocking devices under test
  • Excellent stability, low trace noise and outstanding raw system data for high reliability
  • High accuracy suitable also for meterology applications
  • Wide power sweep range
ZNA Vector Network Analyzer
Open Lightbox

R&S®ZNA43 with four ports and direct channel access

Versatile hardware options

Powerful and universal measurement system

  • Optional direct channel access for wide dynamic range, external test setups and system integration
  • Up to four internal phase-coherent sources for high flexibility and short sweep times
  • Up to two internal receiver LOs for fast mixer measurements with low trace noise
  • Up to eight independent receivers for reliable multi-channel phase measurements
  • Up to four internal pulse modulators and pulse generators
  • Optional source and receiver step attenuators for expanding the usable power range
ZNA Vector Network Analyzer
Open Lightbox

Wide range of software options

Challenging measurements configured intuitively

  • Time domain analysis and extended features as eye diagram for signal integrity
  • Scalar mixer measurements and frequency converting measurements
  • Vector mixer measurements for advanced mixer measurements
  • Frequency converting measurements on mixers/converters without LO access
  • Spectrum analysis mode for an extensive analysis of the device under test
ZNA Vector Network Analyzer
Open Lightbox

Unique operational concept

Intuitive touch-based operation with sophisticated user interface

  • Two independent touchscreens for convenient operation
  • Display of user-selected content (e.g. SCPI commands) on smaller screen possible
  • Efficient operation with muli-touch gestures
  • Free configuration of channels, diagrams with drag-and-drop
  • DUT-centric approach that adapts to the user’s requirements and optimizes the settings
  • Extensive evaluation features for detailed analysis of measurement traces
ZNA Vector Network Analyzer
Open Lightbox

Extension units

Advanced measurement capabilities

Frequency extension up to 500 GHz with the R&S®ZVA-Z and R&S®ZC converter families.

ZNA Vector Network Analyzer
Open Lightbox

Accessories for a complete solution

Different accessories for calibration, verification and different measurements

  • Mechnanical calibration and verification kits
  • Automatic calibration units
  • Inline calibration units for in-situ refresh of calibration data
  • Test cables
  • Torque wrenches
  • Support of R&S®NRP power sensor family
ZNA Vector Network Analyzer
Open Lightbox

Automatic calibration unit, power sensor and calibation mixer.

Available models

Available models

  • Model name

    R&S®ZNA26

    Order number 1332.4500.22

    Ports
    2 ports
    Frequency
    10 MHz to 26.5 GHz
    Connectors
    3.5 mm(m)
  • Model name

    R&S®ZNA26

    Order number 1332.4500.24

    Ports
    4 ports
    Frequency
    10 MHz to 26.5 GHz
    Connectors
    3.5 mm(m)
  • Model name

    R&S®ZNA43

    Order number 1332.4500.42

    Ports
    2 ports
    Frequency
    10 MHz to 43.5 GHz
    Connectors
    2.92 mm(m)
  • Model name

    R&S®ZNA43

    Order number 1332.4500.43

    Ports
    2 ports
    Frequency
    10 MHz to 43.5 GHz
    Connectors
    2.4 mm(m)
  • Model name

    R&S®ZNA43

    Order number 1332.4500.44

    Ports
    4 ports
    Frequency
    10 MHz to 43.5 GHz
    Connectors
    2.92 mm(m)
  • Model name

    R&S®ZNA43

    Order number 1332.4500.45

    Ports
    4 ports
    Frequency
    10 MHz to 43.5 GHz
    Connectors
    2.4 mm(m)

Available options

Direct Channel and Signal Path Access
Product Description

R&S®ZNA26-B16

Order number 1332.4581.22

Description

Direct source and receiver access

for R&S®ZNA26 (2 ports)

R&S®ZNA26-B16

Order number 1332.4581.24

Description

Direct source and receiver access

for R&S®ZNA26 (4 ports)

R&S®ZNA26-B161

Order number 1332.4823.51

Description

Direct source monitor access, port 1

for R&S®ZNA26 (HW opt.)

R&S®ZNA26-B163

Order number 1332.4823.53

Description

Direct source monitor access, port 1+3

for R&S®ZNA26 (HW opt.)

R&S®ZNA43-B16

Order number 1332.4581.42

Description

Direct source and receiver access

for R&S®ZNA43 (2 ports)

R&S®ZNA43-B16

Order number 1332.4581.44

Description

Direct source and receiver access

for R&S®ZNA43 (4 ports)

R&S®ZNA43-B161

Order number 1332.4830.51

Description

Direct source monitor access, port 1

for R&S®ZNA43 (HW opt.)

R&S®ZNA43-B163

Order number 1332.4830.53

Description

Direct source monitor access, port 1+3

for R&S®ZNA43 (HW opt.)

R&S®ZNA-B26

Order number 1332.4598.02

Description

Direct IF access

Source Step Attenuators
Product Description

R&S®ZNA26-B21

Order number 1332.4630.21

Description

Source step attenuator for port 1

mechanical, 70 dB in 10 dB steps, for R&S®ZNA26

R&S®ZNA26-B22

Order number 1332.4630.22

Description

Source step attenuator for port 2

mechanical, 70 dB in 10 dB steps, for R&S®ZNA26

R&S®ZNA26-B23

Order number 1332.4630.23

Description

Source step attenuator for port 3

mechanical, 70 dB in 10 dB steps, for R&S®ZNA26

R&S®ZNA26-B24

Order number 1332.4630.24

Description

Source step attenuator for port 4

mechanical, 70 dB in 10 dB steps, for R&S®ZNA26

R&S®ZNA43-B21

Order number 1332.4646.21

Description

Source step attenuator for port 1

mechanical, 70 dB in 10 dB steps, for R&S®ZNA43

R&S®ZNA43-B22

Order number 1332.4646.22

Description

Source step attenuator for port 2

mechanical, 70 dB in 10 dB steps, for R&S®ZNA43

R&S®ZNA43-B23

Order number 1332.4646.23

Description

Source step attenuator for port 3

mechanical, 70 dB in 10 dB steps, for R&S®ZNA43

R&S®ZNA43-B24

Order number 1332.4646.24

Description

Source step attenuator for port 4

mechanical, 70 dB in 10 dB steps, for R&S®ZNA43

Receiver Step Attenuators
Product Description

R&S®ZNA26-B31

Order number 1332.4700.31

Description

Receiver step attenuator for port 1

mechanical, 35 dB in 5 dB steps, for R&S®ZNA26

R&S®ZNA26-B32

Order number 1332.4700.32

Description

Receiver step attenuator for port 2

mechanical, 35 dB in 5 dB steps, for R&S®ZNA26

R&S®ZNA26-B33

Order number 1332.4700.33

Description

Receiver step attenuator for port 3

mechanical, 35 dB in 5 dB steps, for R&S®ZNA26 (4 ports)

R&S®ZNA26-B34

Order number 1332.4700.34

Description

Receiver step attenuator for port 4

mechanical, 35 dB in 5 dB steps, for R&S®ZNA26 (4 ports)

R&S®ZNA43-B31

Order number 1332.4717.31

Description

Receiver step attenuator for port 1

mechanical, 35 dB in 5 dB steps, for R&S®ZNA43

R&S®ZNA43-B32

Order number 1332.4717.32

Description

Receiver step attenuator for port 2

mechanical, 35 dB in 5 dB steps, for R&S®ZNA43

R&S®ZNA43-B33

Order number 1332.4717.33

Description

Receiver step attenuator for port 3

mechanical, 35 dB in 5 dB steps, for R&S®ZNA43 (4 ports)

R&S®ZNA43-B34

Order number 1332.4717.34

Description

Receiver step attenuator for port 4

mechanical, 35 dB in 5 dB steps, for R&S®ZNA43 (4 ports)

Internal Sources
Product Description

R&S®ZNA26-B3

Order number 1332.4523.02

Description

3rd and 4th internal source

for R&S®ZNA26 (4 ports)

R&S®ZNA43-B3

Order number 1332.4617.02

Description

3rd and 4th internal source

for R&S®ZNA43 (4 ports)

R&S®ZNA-B5

Order number 1332.4675.02

Description

2nd internal LO source

10 MHz to 26.5 GHz, for R&S®ZNA (4 ports)

R&S®ZNA-B8

Order number 1332.4652.02

Description

mmWave converter LO

Signal conditioning
Product Description

R&S®ZNA26-B41

Order number 1332.4775.41

Description

Internal pulse modulators for port 1

for R&S®ZNA26

R&S®ZNA26-B42

Order number 1332.4775.42

Description

Internal pulse modulators for port 2

for R&S®ZNA26

R&S®ZNA26-B43

Order number 1332.4775.43

Description

Internal pulse modulators for port 3

for R&S®ZNA26 (4 ports)

R&S®ZNA26-B44

Order number 1332.4775.44

Description

Internal pulse modulators for port 4

for R&S®ZNA26 (4 ports)

R&S®ZNA26-B213

Order number 1332.4846.13

Description

Internal combiner, port 1 and port 3

for R&S®ZNA26 (HW opt)

R&S®ZNA43-B41

Order number 1332.4781.41

Description

Internal pulse modulators for port 1

for R&S®ZNA43

R&S®ZNA43-B42

Order number 1332.4781.42

Description

Internal pulse modulators for port 2

for R&S®ZNA43

R&S®ZNA43-B43

Order number 1332.4781.43

Description

Internal pulse modulators for port 3

for R&S®ZNA43 (4 ports)

R&S®ZNA43-B44

Order number 1332.4781.44

Description

Internal pulse modulators for port 4

for R&S®ZNA43 (4 ports)

R&S®ZNA43-B213

Order number 1332.4869.13

Description

Internal combiner, port 1 and port 3

for R&S®ZNA43 (HW opt)

Other
Product Description

R&S®ZNA-B4

Order number 1332.4530.02

Description

Precision frequency reference

for R&S®ZNA

R&S®ZNA-B7

Order number 1332.4546.02

Description

Memory extension

for multiple receiver pulse profile measurement

R&S®ZNA-B19

Order number 1332.4600.02

Description

Additional removable harddisc

for R&S®ZNA

R&S®ZNA-B91

Order number 1332.4800.02

Description

Trigger and control I/O board

for R&S®ZNA

Software Options
Product Description

R&S®ZNA-K1

Order number 1332.5320.02

Description

Spectrum analyzer mode

for R&S®ZNA

R&S®ZNA-K2

Order number 1332.5336.02

Description

Time domain analysis (TDR)

for R&S®ZNA

ZNA-K20 - Extended time domain analysis

R&S®ZNA-K20

Order number 1332.4746.02

Description

Extended time domain analysis

incl. eye diagram, for R&S®ZNA

R&S®ZNA-K4

Order number 1332.5342.02

Description

Scalar mixer measurements and arbitrary frequency-converting measurements

for R&S®ZNA

R&S®ZNA-K5

Order number 1332.5359.02

Description

Vector corrected converter measurements for R&S®ZNA

(without reference mixer and phase reference), requires R&S®ZNA-K4

R&S®ZNA-K7

Order number 1332.5371.02

Description

Measurements on pulsed signals:

Pulse configuration, pulse profile and pulse train measurement, requires R&S®ZNA-K17

R&S®ZNA-K8

Order number 1332.5388.02

Description

Converter Control Software

(for R&S®ZNA26 and R&S®ZNA43)

R&S®ZNA-K9

Order number 1332.5394.02

Description

Group delay measurements on frequency converters without LO access

for R&S®ZNA (4 ports and ZNA26/43-Z9 cables recommended)
(requires R&S®ZNAxx-B16 and R&S®ZNA-K4)

R&S®ZNA-K17

Order number 1332.5459.02

Description

Increased IF bandwidth up to 30 MHz

for R&S®ZNA

R&S®ZNA-K19

Order number 1332.5513.02

Description

mHz frequency resolution

for R&S®ZNA

R&S®ZNA-K51

Order number 1332.5559.02

Description

Security write protection of internal harddisc

for R&S®ZNA

R&S®ZVA-Z mm-Wave Converters
Product Description

R&S®ZVA-Z75

Order number 1307.7400.02

Description

Converter, V-Band WR-15

50 GHz to 75 GHz (one item)

R&S®ZVA-Z90

Order number 1322.3024.02

Description

Converter, E-Band WR-12

60 GHz to 90 GHz (one item)

R&S®ZVA-Z110

Order number 1307.7000.03

Description

Converter, W-Band WR-10

75 GHz to 110 GHz (one item)

R&S®ZVA-Z110E

Order number 1307.7000.40

Description

Frequency converter W-Band WR10

75 GHz to 110 GHz (one item), Electronic power control

R&S®ZVA-Z325

Order number 1317.0514.02

Description

Frequency converter, J-Band WR-03

220 GHz to 325 GHz (one item)

R&S®ZVA-Z500

Order number 1317.0520.02

Description

Frequency converter Y-Band WR-02

325 GHz to 500 GHz (one item)

R&S®ZC mm-Wave Converters
Product Description

R&S®ZC78

Order number 3626.5356.02

Description

Millimeter-Wave Converter

53.57 GHz to 78.33 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC90

Order number 1323.7600.02

Description

Millimeter-Wave Converter

Network analysis from 60 GHz to 90 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC90E

Order number 1323.7600.04

Description

Millimeter-Wave converter with electronic power control

Network analysis from 60 GHz to 90 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC110

Order number 1323.7617.02

Description

Millimeter-Wave Converter

Network analysis from 75 GHz to 110 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC140

Order number 1323.7623.02

Description

Millimeter-Wave Converter

Network analysis from 90 GHz to 140 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC170

Order number 1323.7630.02

Description

Millimeter-Wave Converter

Network analysis from 110 GHz to 170 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC220

Order number 1323.7646.02

Description

Millimeter-Wave Converter

Network analysis from 140 GHz to 220 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC260

Order number 3628.5682.02

Description

Millimeter-Wave Converter

170 GHz to 260 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC330 Millimeter-Wave Converter

R&S®ZC330

Order number 1323.7669.02

Description

Millimeter-Wave Converter

Network analysis from 220 GHz to 330 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC500

Order number 1323.7681.02

Description

Frequency Converter WM-570

Network analysis from 330 GHz to 500 GHz (one item), requires R&S®ZCPS power supply

R&S®ZC750

Order number 1323.7717.02

Description

Millimeter-Wave converter

Network analysis from 500 GHz to 750 GHz (one item), requires R&S®ZCPS power supply

Calibration and Verification
Product Description
46839_02.jpg

ZV-Z1xx

Description

Network Analyzer Calibration Kits Economy

- Combination of Open, Short, Match, Through in male or female - Connector types: N (m, f), 3.5 mm (m, f) and 2.92 mm (m, f) connectors

Network-analyzer-accessories-ZN-Z229_49733_02_img01.jpg

R&S®ZN-Z2xx

Description

Network Analyzer Calibration Kits Coaxial optimized high end

High-end calibration kits with extended frequency range, data based characterization. - R&S ZN-Z235 Calibration Kit 50 Ohm, 3.5 mm: DC to 26.5 GHz - R&S ZN-Z229 Calibration Kit 50 Ohm, 2.92 mm: DC to 40/43.5 GHz

46099_06.jpg

R&S®ZV-Z2xx

Description

Network Analyzer Calibration Kits Coaxial high end

- Individual calibration standards Open, Short, Match, Through each in male and female - Connector types: Type N, 3.5 mm, 2.9 mm, 2.4 mm, 1.0 mm - High end accuracy with data based characterization data (individual S-parameters delivered with each kit) - Including torque wrench and open-end wrench

R&S®ZN-ZM292

Description

Calibration Mixer

Wide band application, e.g. RF=20.1GHz to 30GHz, IF= 0.1GHz to 10GHz

45022_2.jpg

R&S®ZV-WRxx

Description

Network Analyzer Calibration Kits Wave Guide

- Wave guide calibration kit series covering 50 GHz to 500 GHz - Including match, short, offset short - Optional version including sliding match - Calibration kit parameter pre-installed in R&S VNAs - Calibration kit versions with sliding match available

46597_01.jpg

R&S®ZV-Z4xx/ZV-Z3xx

Description

Network Analyzer Verification Kits

- R&S®ZV-Z4xx: High-end verification kits, full VNA measurement uncertainty verification, 50 Ohm, up to 50 GHz - R&S®ZV-Z3xx: The R&S T-Check, the fast and economic solution to check VNA measurement uncertainty with a single measurement

47105_01.jpg

R&S®ZN-Z5x

Description

Automatic Calibration Units

- R&S®ZN-Z5x: Models from 9 kHz to 50 GHz, 2 or 4 test ports - R&S®ZN-Z50: Mixed connector types as options available

44381_1.jpg

R&S®ZV-Z53/Z58/59

Description

Network Analyzer Calibration Units high end 2 to 8 ports

- R&S®ZV-Z53 *. 75: 2 ports, 3 GHz, 75 Ohm - R&S®ZV-Z58: 8 GHz, 8 ports, 3.5 mm (f) or N (f) - R&S®ZV-Z59 20 GHz, 6 ports, 3.5 mm (f)

47432_04.jpg

R&S®ZN-Z15x

Description

Network Analyzer Calibration Units economy 2 to 24 ports

- Automatic calibration units with two up to 24 test ports, 8.5 GHz - 2-port calibration unit ZN-Z156 up to 67 GHz

ZN-Z3x-Network-Analyzer-Inline-Calibration-Units_img01.jpg

R&S®ZN-Z3x

Description

Network Analyzer Inline Calibration Units

- Automatic calibration (update) possible without re-connection of calibration devices - The R&S®ZN-Z3x units stay permanently connected in the test setup, i.e. the calibration refresh needs no re-connection of calibration devices

45210_4.jpg

R&S®ZV-Z9x

Description

Network Analyzer Test Cables ruggedized

- High-end test cables, ruggedized connectors, armored construction for exceptional breakdown withstand to crush forces

45210_8.jpg

R&S®ZV-Z19x

Description

Network Analyzer Test Cables

- High-end test cables, lightweight, bending resistance combined with virtually no springback

47905_01.jpg

R&S®ZN-ZTW

Description

Torque Wrenches

- Different models, from 0.34 Nm to 1.5 Nm

Recommended extras
Product Description

R&S®ZZA-KN6

Order number 1175.3056.00

Description

19" adapter BW2010, cabinet 6HU 1/1

R&S®ZNA43-Z9

Order number 1332.4730.44

Description

Cable Set for ZNA-K9 for R&S®ZNA43 (4 ports)

Combines signals from port 1 and port 3 to a two-tone signal at port 1 (for Intermodulation and two-tone mixer Group Delay measurements)

R&S®ZNA43-Z9

Order number 1332.4730.43

Description

Cable Set for ZNA-K9 for R&S®ZNA43 (4 ports), 2.92mm(m) connectors

Combines signals from port 1 and port 3 to a two-tone signal at port 1 (for Intermodulation and two-tone mixer Group Delay measurements)

R&S®ZNA26-Z9

Order number 1332.4730.26

Description

Cable Set for ZNA-K9 for R&S®ZNA26 (4 ports)

Combines signals from port 1 and port 3 to a two-tone signal at port 1 (for Intermodulation and two-tone mixer Group Delay measurements)

Further Accessories
Product Description
Small-Components-Accessories_img_fs.jpg

Network Analyzer Accessories

Vídeos de aplicación

Signal Integrity Measurements
Signal Integrity Measurements

In combination with the time domain option R&S®ZNA-K2 and the extended time domain option R&S®ZNA-K20, the R&S®ZNA vector network analyzer offers a variety of signal integrity measurements. The device under test, a USB-C cable, is analyzed in frequency and time domain as well as in eye diagram representation.

Intermodulation Measurements on an Amplifier
Medidas de intermodulación en un amplificador

Este vídeo explica cómo realizar medidas de intermodulación en dispositivos, en este caso en un amplificador, con un R&S®ZNA. Muestra la configuración, la calibración con el sensor de potencia R&S®NRP y una recomendación breve sobre cómo verificar la configuración de medida.

Mixer Basics and Scalar Mixer Measurements
Información básica sobre mezcladores y medidas escalares de mezcladores

Este vídeo muestra cómo realizar medidas escalares de mezcladores con el R&S®ZNA. Se tratan, entre otros temas, el ajuste de la configuración de medida en el asistente del mezclador y la calibración, y se analizan los resultados típicos de medida.

Group Delay Measurements on Mixers without LO access
Medidas de retardo de grupo en mezcladores sin acceso de oscilador local

Este vídeo describe cómo realizar medidas en dispositivos convertidores de frecuencia que disponen de un oscilador local con el R&S®ZNA. Se exponen las ventajas de la solución R&S®ZNA para medidas de retardo de grupo en este tipo de dispositivos, incluida la función de seguimiento del oscilador local y el concepto de oscilador local dual.

Vídeos de las funciones del producto

Takes measurements quality to the next level
Eleva la calidad de medida al siguiente nivel
Ready for spectrum analysis
Preparado para el análisis de espectro
Unique DUT centric operation
Operación exclusiva centrada en el objeto examinado
Unique operation concept
Concepto de operación exclusivo

Solicitar información

¿Tiene preguntas o necesita información adicional? Simplemente complete este formulario y nos pondremos en contacto con usted.

Deseo recibir información de Rohde & Schwarz por

Permiso de marketing

¿Qué significa esto exactamente?

Estoy de acuerdo con que ROHDE & SCHWARZ GmbH & Co. KG y la entidad o subsidiaria ROHDE & SCHWARZ que figure en la Declaración de confidencialidad del sitio web se ponga en contacto conmigo a través del canal elegido (correo electrónico o correo postal) para fines de marketing y publicitarios (p. ej., información sobre ofertas especiales y promociones de descuentos) en relación con, pero sin limitarse a, productos y soluciones para test y medida, seguridad en las comunicaciones, monitorización y medidas de redes, broadcast y multimedia así como ciberseguridad.

Sus derechos

Esta declaración de consentimiento se puede retirar en cualquier momento enviando un correo electrónico a news@rohde-schwarz.com con el asunto «Cancelar mi suscripción». Además, en cada correo electrónico enviado se incluye un enlace para cancelar por correo electrónico la suscripción a futuros anuncios. En la Declaración de privacidad encontrará información adicional sobre el uso de los datos personales y el procedimiento de retirada.

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.