Key Facts
Portable network analyzer, optional spectrum analyzer (with independent CW source) and power sensor support
The R&S®ZNL helps reduce investment costs with a unique option concept. The base models support frequencies from 5 kHz to 20 GHz and they can be expanded to include a fully integrated spectrum analyzer and support RF power meters. Furthermore, spectrum analysis supports a CW signal generator option. Instead of investing in multiple instruments, research labs, service centers, universities and production facilities can use a single, compact instrument that offers even higher measurement speeds and better RF performance than dedicated instruments in comparable classes.
Benchtop VNA with a small form factor
With a depth of less than 24 cm and weighing only 6 kg to 8 kg, the R&S®ZNL is the most compact instrument in its class. The small footprint leaves plenty of space on the workbench – more than with any other comparable benchtop analyzer.
Ideal for the field
With a carrying handle and an optional battery pack, the R&S®ZNL is a fully portable instrument ideal for field use
Many instruments, one box
The spectrum analyzer option available on all the models saves even more space, since the R&S®ZNL offers the functions of different instruments in the same compact size. The R&S®FPL1-K9 option adds support for R&S®NRP power sensors, and the R&S®ZNL-K14 option adds an independent CW signal generator, turning the R&S®ZNL into a multi-functional analysis device.
Three-in-one
All R&S®ZNL models can be equipped with a spectrum analyzer up to 26.5 GHz, adding the R&S®FPL scope of functions. The R&S®ZNL-K14 option adds an independent CW signal generator to measure harmonics and spurious frequency components
Battery and DC power supply for field use
The optional battery pack makes the R&S®ZNL a fully portable instrument ideal for field use. The optional 12 V/24 V DC power supply can be used to operate the R&S®ZNL in vehicles. The optional R&S®FPL1-Z2 transport bag protects the instrument against damage and dirt during transport and field deployment. Side vents and a transparent top cover allow portable operation while the instrument remains safely in the bag. A carrying vest holster is also available.
Value, versatility and performance
The R&S®ZNL is an ideal economic high-performance VNA with a broad range of measurement functions
Order Number 1323.0012.03
Order Number 1323.0012.04
Order Number 1323.0012.06
Order Number 1323.0012.14
Order Number 1323.0012.20
Order Number 1323.1860.02
Extended power range for R&S®ZNL3
Extends the output power range of R&S®ZNL3 down to -40 dBm.
Order Number 1303.8118.02
Extended power range for R&S®ZNL4
Extends the output power range of R&S®ZNL4 down to -40 dBm
Order Number 1323.2021.02
Extended power range for R&S®ZNL6
Extends the output power range of R&S®ZNL6 down to -40 dBm
Order Number 1303.8153.02
Extended power range for R&S®ZNL14
Extends the output power range of R&S®ZNL14 down to -40 dBm
Order Number 1303.9089.02
Extended power range for R&S®ZNL20
Extends the output power range of R&S®ZNL20 down to -40 dBm
Order Number 1323.1848.02
Receiver step attenuator for R&S®ZNL3 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL3. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order Number 1323.1854.02
Receiver step attenuator for R&S®ZNL3 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL3. The receiver step attenuator can be set up to 30 dB in 10 dB steps
Order Number 1303.8124.02
Receiver step attenuator for R&S®ZNL4 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL4. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order Number 1303.8130.02
Receiver step attenuator for R&S®ZNL4 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL4. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order Number 1323.2038.02
Receiver step attenuator for R&S®ZNL6 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL6. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order Number 1323.2044.02
Receiver step attenuator for R&S®ZNL6 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL6. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order Number 1303.8160.02
Receiver step attenuator for R&S®ZNL14 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL14. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order Number 1303.8176.02
Receiver step attenuator for R&S®ZNL14 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL14. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order Number 1303.9095.02
Receiver step attenuator for R&S®ZNL20 port 1
Adds the functionality of an electronic receiver step attenuator at port 1 of a R&S®ZNL20. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order Number 1303.9108.02
Receiver step attenuator for R&S®ZNL20 port 2
Adds the functionality of an electronic receiver step attenuator at port 2 of a R&S®ZNL20. The receiver step attenuator can be set up to 30 dB in 10 dB steps.
Order Number 1323.1802.02
Spectrum analyzer function for R&S®ZNL3
Transforms the R&S®ZNL3 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Order Number 1303.8099.02
Spectrum analyzer function for R&S®ZNL4
Transforms the R&S®ZNL4 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions.
Order Number 1323.2067.02
Spectrum analyzer function for R&S®ZNL6
Transforms the R&S®ZNL6 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Order Number 1303.8082.02
Spectrum analyzer function for R&S®ZNL14
Transforms the R&S®ZNL14 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Order Number 1303.8101.02
Spectrum analyzer function for R&S®ZNL20
Transforms the R&S®ZNL20 into a full-featured spectrum analyzer by adding the R&S®FPL scope of functions
Order Number 1323.1902.02
OCXO accurate reference frequency
High precision frequency reference
Order Number 1323.1883.02
Additional interfaces
Video out, IF out, noise source control, AUX port, connector for R&S®NRP power sensors
Order Number 1323.1890.02
GPIB interface
Additional interface for remote control by GPIB, plug-in unit
Order Number 1323.1619.02
YIG preselector bypass
Enables full 40 MHz bandwidth analysis in frequencies up to 26.5 GHz
Order Number 1323.1877.02
DC Power supply for 12/24 V supply
Order Number 1323.1725.02
Li-Ion battery pack
Order Number 1323.1931.02
40 MHz analysis bandwidth
Enables the use of 40 MHz bandwidth for R&S®ZNLx-B1 spectrum analysis option
Order Number 1323.2938.02
Additional removable PC board with SSD
Additional removable solid-state disk mounted on PC board, including analyzer firmware
Order Number 1323.1960.02
Protective hard cover
Order Number 1323.1977.02
Transport bag, transparent cover
Order Number 1323.1683.02
Carrying vest holster
Order Number 1323.1677.02
Spare battery pack
Order Number 1323.1690.02
Anti-glare film
Order Number 1323.1954.02
Rack mount kit
Order Number 1338.8008.18
Smart noise source 10 MHz to 18 GHz
Order Number 1338.8008.26
Smart noise source 10 MHz to 26.5 GHz
Order Number 1417.0909.02
N(m) adapter for R&S®RT-Zx probes
To connect R&S®RT-Zx probes to spectrum and network analyzers with N(f) connectors; USB connector for power supply and communication
Order Number 1410.4309.02
Active single-ended probe, 3 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order Number 1418.7307.02
Active single-ended probe, 6 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order Number 1410.4609.02
Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface
Order Number 1410.5205.02
Active differential probe, 4.5 GHz, Rohde & Schwarz probe interface
Order Number 1800.5406.02
Power rail probe, 4 GHz, R&S®ProbeMeter, Rohde & Schwarz probe interface
Order Number 1323.1819.02
Time domain analysis
Displays discontinuities, reflection factors or impedance vs. delay/length. Contains step and impulse response, lowpass/bandpass frequency spacing and gated S-param.
Order Number 1323.1825.02
Distance-to-fault measurements
Allows detection of cable faults and connectors
Order Number 1323.1731.02
AM/FM/PM analog modulation analysis
Modulation analysis for analog (AM, FM, PM) modulated single carrier signals
(For use in ZNL, ZNLx-B1 is required)
Order Number 1323.1754.02
Measurements with R&S®NRP power sensors
Supports R&S®NRP power sensors for power measurements. Requires R&S®ZNLx-B1
Order Number 1303.8182.02
Independent CW source for spectrum analyzer options (R&S®ZNL3, R&S®ZNL4 and R&S®ZNL6 models only)
Independent CW source for R&S®ZNL, can be used as stimulus for spectrum analysis and requires the R&S®ZNLx-B1 option
Order Number 1323.1760.02
Noise figure measurements
Adds the capability to perform noise figure measurements. Requires R&S®ZNL-K1 and R&S®FSL-B5
Order Number 1328.8534.10
Torque Wrench, 0.45 Nm
for 1.0 mm connectors, 6 mm width across flats
Order Number 1328.8534.11
Torque Wrench, 0.23 Nm coupling torque
for 1.0 mm connectors with 6 mm width across flats
Order Number 1328.8534.12
Torque Wrench, 0.34 Nm
for 1.0 mm connectors, 6 mm width across flats
Order Number 1328.8534.19
Torque Wrench, 0.9 Nm
Order Number 1328.8534.35
Torque Wrench, 0.9 Nm
Order Number 1328.8534.71
Torque Wrench, 1.5 Nm
for type N connectors, 20 mm width across flats
Order Number 0272.4010.50
Attenuator
0 Hz to 12.4 GHz, m/f 3 dB, 2 W
Order Number 0272.4110.50
Attenuator
0 Hz to 12.4 GHz, m/f 6 dB, 2 W
Order Number 0272.4210.50
Attenuator
0 Hz to 12.4 GHz, m/f 10 dB, 1 W
Order Number 0272.4310.50
Attenuator
0 Hz to 12.4 GHz, m/f 20 dB, 1 W
Order Number 1073.8695.03
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order Number 1073.8695.06
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order Number 1073.8695.10
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order Number 1073.8695.20
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order Number 1073.8695.30
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order Number 1073.8495.03
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order Number 1073.8495.06
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order Number 1073.8495.10
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order Number 1073.8495.20
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order Number 1073.8495.30
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order Number 1035.1700.52
High-Power Attenuator, 50W
0 Hz to 6 GHz, 20 dB
Order Number 1303.7840.02
50 Ohm broadband limiter
Order Number 0272.4510.50
Precision Termination, 75 Ω
1 W, DC to 3 GHz, N (m)
Order Number 0272.4910.50
Termination, 50 Ω
1 W, DC to 4 GHz, N (m)
Order Number 0200.0019.55
UHF Termination , 50 Ω
0 Hz to 2 GHz, 100 W, N (f)
Order Number 0289.8966.00
Feedthrough Termination, 50 Ω
0.5 W, DC to 1 GHz, BNC (m/f)
Order Number 0844.9352.02
Feedthrough Termination, 50 Ω
2 W, DC to 500 MHz, BNC (m/f)
Order Number 0358.5414.02
Matching pad, 75 Ω, L section
bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
Order Number 0358.5714.03
Matching Pad 50/75 Ω, series resistor 25 Ω
0 Hz to 3.3 GHz
Order Number 0358.5714.02
Matching pad, 75 Ω, series resistor 25 Ω
0 Hz to 2.7 GHz
Order Number 0800.6612.52
Power Splitter, 2x 50 Ω
0 Hz to 2.7 GHz
Productos relacionados
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz
1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).
2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.
3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.
4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.
5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:
Premio: 1 osciloscopio digital R&S®RTB2000
6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.
7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.
8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.
9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.
10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.
11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.
12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.
13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.
